OBJ_DOKU-555-002.fm Page 1 Monday, October 29, 2007 11:44 AM
Robert Bosch GmbH |
|
Power Tools Division |
|
70745 Leinfelden-Echterdingen |
GBM Professional |
www.bosch-pt.com |
|
1 609 929 M65 (2007.10) O / 63 |
23-2 | 23-2 E |
|
|
|
us Original operating instructions |
vn BΩng hõëng dÿn nguy›n bΩn |
|
cn |
fr |
Notice originale |
tw |
ar |
ΔϴϠλϷ ϞϴϐθΘϟ ΕΎϤϴϠόΗ |
kr |
fa |
̶Ϡλ έΎ̯ ίήσ ̵ΎϤϨϫέ |
th
id Petunjuk-Petunjuk untuk Penggunaan Orisinal
OBJ_BUCH-43-002.book Page 2 Monday, October 29, 2007 11:42 AM
2 |
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Bahasa Indonesia . . . . . . . . . . . . . . . . . . Halaman
Tiøng Vi·t . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trang
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
Page |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
ΔΤϔλ |
vÝ—U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
ϪΤϔλ |
33
40
46
52
57
|
|
1 609 929 M65 | (29.10.07) |
|
|
Bosch Power Tools |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 3 Monday, October 29, 2007 11:42 AM
3 |
1 608 598 028 (MK2–MK1)
1 603 115 004 (MK2–5/8")
1 608 571 056
2 608 030 056 (MS 80 G)
2 608 030 057 (MS 100 G)
|
|
1 609 929 M65 | (29.10.07) |
|
|
Bosch Power Tools |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 4 Monday, October 29, 2007 11:42 AM |
|
|
4 | |
|
|
8 |
|
|
9 |
3 |
|
|
|
|
10 |
|
|
11 |
|
|
12 |
|
|
1 609 929 M65 | (29.10.07) |
|
Bosch Power Tools |
OBJ_BUCH-43-002.book Page 5 Monday, October 29, 2007 11:42 AM |
|
|
|
5 | |
|
|
|
1 |
|
|
|
2 |
|
|
|
|
|
|
3 |
7 |
6 |
5 |
4 |
GBM 23-2 |
|
|
|
GBM 23-2 E |
|
|
|
Professional |
|
|
|
1 609 929 M65 | (29.10.07) |
|
|
Bosch Power Tools |
OBJ_BUCH-43-002.book Page 6 Monday, October 29, 2007 11:42 AM
6 | English
General Power Tool Safety
Warnings
|
Read all safety warnings and all |
|
WARNING |
||
instructions. Failure to follow |
||
|
the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or bat- tery-operated (cordless) power tool.
1)Work area safety
a)Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2)Electrical safety
a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
b)Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e)When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f)If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) or an earth leakage circuit breaker (ELCB). Use of a GFCI or an ELCB reduces the risk of electric shock.
3)Personal safety
a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
b)Use personal protective equipment. Always wear eye protection. Protective equipment such as dusk mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
c)Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.
e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f)Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
|
|
1 609 929 M65 | (29.10.07) |
|
|
Bosch Power Tools |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 7 Monday, October 29, 2007 11:42 AM
g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
4)Power tool use and care
a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it is designed.
b)Do not use the power tool if the switch does not turn it on or off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g)Use the power tool, accessories, tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
English | 7
5)Service
a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Power Tool-specific Safety
Warnings
fUse the auxiliary handle supplied with the power tool. Loss of control over the power tool can cause personal injury.
fUse suitable detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property damage.
fSwitch off the power tool immediately when the tool insert jams. Be prepared for high reaction torque that can cause kickback. The tool insert jams when:
–the power tool is subject to overload or
–it becomes wedged in the workpiece.
fHold the power tool only by the insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own power cord. Contact with a “live” wire will also make exposed metal parts of the power tool “live” and shock the operator.
fWhen working with the power tool, always hold it firmly with both hands and provide for a secure stance. The power tool is guided more secure with both hands.
fSecure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.
fKeep your workplace clean. Blends of materials are particularly dangerous. Dust from light alloys can burn or explode.
fAlways wait until the power tool has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool.
|
|
Bosch Power Tools |
|
|
1 609 929 M65 | (29.10.07) |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 8 Monday, October 29, 2007 11:42 AM
8 | English
fDo not use the power tool with a damaged cord. Do not touch the damaged cord and pull the plug from the outlet when the cord is damaged while working. Damaged cords increase the risk of an electric shock.
Functional Description
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious injury.
While reading the operating instructions, unfold the graphics page for the tool and leave it open.
Intended Use
The machine is intended for drilling in wood, metal, ceramic and plastic.
Product Features
The numbering of the product features refers to the illustration of the power tool on the graphics page.
1Rotatable pressure plate
2Auxiliary handle
3Opening for drift
4Tool holder
5Lock-on button for On/Off switch
6On/Off switch
7Gear selection lever
8Thread for auxiliary handle
9Drift
10Reducing sleeve*
11Tapered arbor*
12Key chuck*
*The accessories illustrated or described are not included as standard delivery.
Technical Data
Drill |
|
GBM 23-2 |
GBM 23-2 E |
|
|
Professional |
Professional |
Article number |
|
0 601 121 1.. |
0 601 121 6.. |
Rated power input |
W |
1150 |
1150 |
Output power |
W |
670 |
670 |
No-load speed |
|
|
|
– 1st gear |
rpm |
400 |
0 – 400 |
– 2nd gear |
rpm |
920 |
0 – 920 |
Rated speed |
|
|
|
– 1st gear |
rpm |
280 |
0 – 280 |
– 2nd gear |
rpm |
640 |
0 – 640 |
Rated torque (1st/2nd gear) |
Nm |
23/10 |
23/10 |
Maximum drilling diameter (1st/2nd gear) |
|
|
|
– Steel |
mm |
23/13 |
23/13 |
– Wood |
mm |
50/35 |
50/35 |
– Aluminum |
mm |
28/18 |
28/18 |
Tool holder |
|
MK 2– DIN 228 |
MK 2– DIN 228 |
Weight according to EPTA-Procedure 01/2003 |
kg |
4.6 |
4.8 |
Protection class |
|
/II |
/II |
|
|
|
|
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your power tool. The trade names of individual tools may vary.
|
|
1 609 929 M65 | (29.10.07) |
|
|
Bosch Power Tools |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 9 Monday, October 29, 2007 11:42 AM
Assembly
Auxiliary Handle
fOperate your power tool only with the auxiliary handle 2.
Screw the auxiliary handle 2 into the thread 8 on the gear head.
English | 9
–Use dust extraction whenever possible.
–Provide for good ventilation of the working place.
–It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the materials to be worked.
Changing the Tool
fBefore any work on the power tool itself, pull the mains plug.
Drilling tools with a MT2 morse taper can be inserted directly into the tool holder 4. For drill bits with MT1 morse taper, use the reducing sleeve 10. Pay attention that the morse cone and the morse taper are free of grease.
The use of drilling tools with cylindrical shank is possible with the key chuck 12. For this, place the tapered arbor 11 into the tool holder 4 and screw on the key chuck 12.
fDo not exert any force when inserting the morse taper or the tapered arbor. This can damage the tool holder and the inserted tool.
Before removing the inserted tool, unscrew the auxiliary handle 2.
Place the drift 9 into the opening 3 in such a manner that the rounded off side faces to the pressure plate 1.
If the drift 9 cannot be inserted through the drive spindle, turn the tool insert a little.
Press the drift 9 toward the pressure plate 1 and release the tool insert from out of the tool holder.
Dust/Chip Extraction
fDusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health. Touching or breathing-in the dusts can cause allergic reactions and/or lead to respiratory infections of the user or bystanders.
Certain dusts, such as oak or beech dust, are considered as carcinogenic, especially in connection with wood-treatment additives (chromate, wood preservative). Materials containing asbestos may only be worked by specialists.
Bosch Power Tools
Operation
Starting Operation
fObserve correct mains voltage! The voltage of the power source must agree with the voltage specified on the type plate of the power tool.
Gear Selection, Mechanical
fActuate the gear selection lever 7 only when the machine is at a complete standstill.
Two speed ranges can be preselected with the gear selection lever 7.
1st gear:
Low speed range; for working with large drilling diameter.
2nd gear:
High speed range; for working with small drilling diameter.
If the gear selection lever 7 cannot be fully engaged, lightly rotate the drill bit by twisting the drill chuck.
Switching On and Off
To start the power tool, press the On/Off switch 6 and keep it pressed.
Lock the pushed On/Off switch 6 by pushing the lockon button 5 upward.
To switch off the power tool, release the On/Off switch 6 or when it is locked with the lock-on button 5, briefly press the On/Off switch 6 and then release it.
1 609 929 M65 | (29.10.07)
OBJ_BUCH-43-002.book Page 10 Monday, October 29, 2007 11:42 AM
10 | English
Adjusting the Speed (GBM 23-2 E)
The speed of the switched on power tool can be variably adjusted, depending on how far the On/Off switch 6 is pressed.
Light pressure on the On/Off switch 6 results in a low rotational speed. Further pressure on the switch results in an increase in speed.
Working Instructions
Use drilling lubricant or cutting oil for cooling and lubrication, and to avoid overheating or jamming of the drill bit.
When drilling diameters >10 mm, drill a pilot hole with a small drilling diameter. This allows you to reduce the feed pressure and the power tool is strained less.
For drilling in metal, use only perfectly sharpened HSS drill bits (HSS = High Speed Steel). The appropriate quality is guaranteed by the Bosch accessories program.
The machine vice, which is available as an accessory, enables secure clamping of workpieces. This prevents the workpiece from turning and any accidents this would cause.
Maintenance and Service
Maintenance and Cleaning
fBefore any work on the power tool itself, pull the mains plug.
fFor safe and proper working, always keep the power tool and the ventilation slots clean.
If the power tool should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service center for Bosch power tools.
In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the power tool.
After-sales service and customer assistance
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found under:
www.bosch-pt.com
Our customer consultants answer your questions concerning best buy, application and adjustment of products and accessories.
In case of a claim, repair or purchase of replacement parts or in case of queries or other problems, please contact your local dealer or Bosch representative.
People’s Republic of China
Website: www.bosch-pt.com.cn
China Mainland
Bosch Power Tools (China) Co., Ltd. 567, Bin Kang Road
Bin Jiang District 310052 Hangzhou, P.R.China
Service Hotline: 800 8 20 84 84 Tel.: +86 (571) 87 77 43 38 Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Melchers (H.K.) Ltd, Room 1210 Shun Tak Centre, West-Tower
168 – 200 Connaught Road, Central Hong Kong Customer Service Hotline: +852 (25) 89 15 61 Fax: +852 (25) 48 79 14
E-Mail: bosch@melchers.com.hk
Indonesia
PT. Multi Tehaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Indonesia
Tel.: +62 (21) 4 60 12 28
Fax: +62 (21) 46 82 68 23
E-Mail: sales@multitehaka.co.id
www.multitehaka.co.id
|
|
1 609 929 M65 | (29.10.07) |
|
|
Bosch Power Tools |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 11 Monday, October 29, 2007 11:42 AM
English | 11
Phillippines
Robert Bosch, Inc.
Zuellig Building
Sen. Gil Puyat Avenue
Makati City 1200, Metro Manila
Philippines
Tel.: +63 (2) 8 17 32 31
www.bosch.com.ph
Malaysia
Robert Bosch (SEA.) Pte. Ltd. No. 8a, Jalan 13/6
46200 Petaling Jaya, Selangor,
Malaysia
Tel.: +6 (03) 7966 3000
Fax: +6 (03) 7958 3838
E-Mail: hengsiang.yu@my.bosch.com Toll Free tel.: 1 800 880 188
Fax: +6 (03) 7958 3838 www.bosch.com.sg
Thailand
Robert Bosch Ltd. Liberty Square Building No. 287, 11 Floor Silom Road, Bangrak Bangkok 10500
Tel.: +66 (2) 6 31 18 79 – 18 88 (10 lines) Fax: +66 (2) 2 38 47 83
Robert Bosch Ltd., P. O. Box 2054 Bangkok 10501, Thailand
Bosch Service – Training Centre 2869-2869/1 Soi Ban Kluay
Rama IV Road (near old Paknam Railway) Prakanong District
10110 Bangkok Thailand
Tel.: +66 (2) 6 71 78 00 – 4 Fax: +66 (2) 2 49 42 96 Fax: +66 (2) 2 49 52 99
Singapore
Robert Bosch (SEA.) Pte. Ltd. 38 C Jalan Pemimpin Singapore 915701
Republic of Singapore
Tel.: +65 (3) 50 54 94
Fax: +65 (3) 50 53 27 www.bosch.com.sg
Vietnam
Robert Bosch (SEA) Pte. Ltd – Vietnam
Representative Office
Saigon Trade Center, Suite 1206
37 Ton Duc Thang Street,
Ben Nghe Ward, District 1
HCMC
Vietnam
Tel.: +84 (8) 9111 374 – 9111 375
Fax: +84 (8) 9111376
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd. Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center Inside Australia:
Phone: +61 (01300) 307 044
Fax: + 61 (01300) 307 045 Inside New Zealand: Phone: +64 (0800) 543 353 Fax: +64 (0800) 428 570 Outside AU and NZ: Phone: +61 (03) 9541 5555 www.bosch.com.au
Disposal
Power tools, accessories and packaging should be sorted for environmental-friendly recycling.
Subject to change without notice.
|
|
Bosch Power Tools |
|
|
1 609 929 M65 | (29.10.07) |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 12 Monday, October 29, 2007 11:42 AM
12 |
/
" "
a) 昏暗的工作场所容易导致意外。
b) 害的发生机率。
c)/
d) 整工具/
a) 擅自更改插头。转接插头不可以和接了地线的电
合适的插座可以降低遭受电击的危险。
b) 容易遭受电击。
高操作者遭受电击的危险。
e) 低操作者遭受电击的危险。
流保护开关可以预防遭受电击。
f) 首饰容易被捲入转动的机件中。
g) 体。
b) 将故障的机器送修。
c) 必须先从插座上拔出插头并且/
|
|
1 609 929 M65 | (29.10.07) |
|
|
Bosch Power Tools |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 13 Monday, October 29, 2007 11:42 AM
| 13
d)f
动工具容易发生意外。
e) 彻底执行机器的维护工作容易导致工作意外。
f) 操作。
f 起爆炸。
f 具。
f 头。
器的安全性能。
並且/
f 动工具容易造成伤害。
f 果水管被刺穿了会导致财物损失。
f 住如果
f 可能造成操作者触电。
f 固。
1
2
3
4
5
6
7
8
9
10*
11*
12*
*
|
|
Bosch Power Tools |
|
|
1 609 929 M65 | (29.10.07) |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 14 Monday, October 29, 2007 11:42 AM
14 |
|
|
|
|
|
GBM 23-2 |
GBM 23-2 E |
|||||||
|
|
|
|
|
|
|
|
Professional |
Professional |
||||
|
|
|
|
|
0 601 121 1.. |
0 601 121 6.. |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1150 |
1150 |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
670 |
670 |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
– |
/ |
400 |
0 – 400 |
||||||||
|
|
– |
/ |
920 |
0 – 920 |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
– |
/ |
280 |
0 – 280 |
||||||||
|
|
– |
/ |
640 |
0 – 640 |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1./ 2. |
|
23/10 |
23/10 |
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ø (1./2. ) |
|
|
|
|
|
|
|
|
|||
|
|
– |
|
|
23/13 |
23/13 |
|
|
|
||||
|
|
– |
|
|
50/35 |
50/35 |
|
|
|
||||
|
|
– |
|
|
28/18 |
28/18 |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
MK 2– DIN 228 |
MK 2– DIN 228 |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EPTA-Procedure 01/2003 |
|
|
4,6 |
4,8 |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
/II |
|
/II |
||||||
|
|
230/240 V |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
12 |
||||||||||
|
|
|
|
|
|
11 4 |
|||||||
|
|
|
|
|
|
12 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
f |
|||||||||||
|
|
|
|
|
|
||||||||
|
|
f 2. |
|
||||||||||
|
|
2 8 |
2 |
||||||||||
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
9 3 |
|||||||
|
|
|
1 |
|
|
|
|
|
|
||||
|
|
f |
9 |
||||||||||
|
|
9 1 |
|||||||||||
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
4 MK2 |
|
|
|
|
|
|
|
|
|||
|
|
MK1 |
|
|
|
|
|
|
|
|
|||
|
|
10 |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 609 929 M65 | (29.10.07) |
|
|
|
Bosch Power Tools |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 15 Monday, October 29, 2007 11:42 AM
/
f 病。
含石棉的物料。
–P2
f 标示的电压一致。
7
7 2
; 
;
7
/
6
| 15
56
6 56
(GBM 23-2 E)
6
6
切割油来冷却和润滑。
10
HSSHSS =
f 拔出插头。
f 高工作品质和安全性。
的顾客服务处修理。
10
|
|
Bosch Power Tools |
|
|
1 609 929 M65 | (29.10.07) |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 16 Monday, October 29, 2007 11:42 AM
16 |
www.bosch-pt.com
设定本公司产品及附件的问题。
询。
滨江区滨康路567
310052
800 820 8484
+86 (571) 8777 4502
service.hz@cn.bosch.com
+86 571 8777 4338
+86 571 8777 4502
service.hz@cn.bosch.com www.bosch-pt.com.cn
和废弃的包装材料。
|
|
1 609 929 M65 | (29.10.07) |
|
|
Bosch Power Tools |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 17 Monday, October 29, 2007 11:42 AM
/
" "
a) 昏暗的工作場所容易導致意外。
| 17
a) 用電動工具時只要稍微分心便可能發生後果嚴重 的意外。
b) 害的發生機率。
c)/
合適的插座可以降低遭受電擊的危險。
b) 容易遭受電擊。
/
e) 助您在突發狀況下及時控制住電動工具。
f) 首飾容易被捲入轉動的機件中。
g) 該裝置。
高操作者遭受電擊的危險。
e) 低操作者遭受電擊的危險。
f) 流保護開關可以預防遭受電擊。
b) 將故障的機器送修。
c) 必須先從插座上拔出插頭并且/
|
|
Bosch Power Tools |
|
|
1 609 929 M65 | (29.10.07) |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 18 Monday, October 29, 2007 11:42 AM
18 |
d)f
動工具容易發生意外。
e) 徹底執行機器的維護工作容易導致工作意外。
f) 操作。
f 起爆炸。
f 具。
f 頭。
a) 器的安全性能。
並且/
翻開折疊
f 動工具容易造成傷害。
f 會造成火災並遭受電擊。損壞瓦斯管會引起爆炸。如 果水管被刺穿了會導致財物損失。
f 住如果
f 可能造成操作者觸電。
f 固。
1
2
3
4
5
6
7
8
9
10*
11*
12*
*
|
|
1 609 929 M65 | (29.10.07) |
|
|
Bosch Power Tools |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-43-002.book Page 19 Monday, October 29, 2007 11:42 AM
|
|
|
|
|
|
|
|
|
| 19 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
GBM 23-2 |
GBM 23-2 E |
|
|
|||
|
|
|
|
|
|
|
|
Professional |
Professional |
|
|
|
|
|
|
|
|
|
0 601 121 1.. |
0 601 121 6.. |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1150 |
1150 |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
670 |
670 |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
– |
|
/ |
400 |
0 – 400 |
|
|
||||
|
|
– |
|
/ |
920 |
0 – 920 |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
– |
|
/ |
280 |
0 – 280 |
|
|
||||
|
|
– |
|
/ |
640 |
0 – 640 |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1./ 2. |
|
|
23/10 |
23/10 |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ø (1./2. ) |
|
|
|
|
|
|
|
|
||
|
|
– |
|
|
23/13 |
23/13 |
|
|
||||
|
|
– |
|
|
50/35 |
50/35 |
|
|
||||
|
|
– |
|
|
28/18 |
28/18 |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MK 2 – DIN 228 |
MK 2 – DIN 228 |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EPTA-Procedure 01/2003 |
|
|
4,6 |
4,8 |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/II |
/II |
|
|
|||
|
|
230/240 V |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
12 |
|
|
||||||
|
|
|
|
|
|
11 4 |
|
|
||||
|
|
|
|
|
|
12 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
f |
|
|
|||||||
|
|
|
|
|
|
|
|
|||||
|
|
f 2. |
|
|
|
|
||||||
|
|
2 8 |
|
2 |
|
|
||||||
|
|
|
|
|
|
9 |
3 |
|
|
|||
|
|
|
|
1 |
|
|
|
|
|
|||
|
|
f |
|
9 |
|
|
||||||
|
|
|
9 |
1 |
|
|
||||||
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
4 MK2 |
|
|
|
|
|
|
|
|
||
|
|
MK1 |
|
|
|
|
|
|
|
|
||
|
|
10 |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch Power Tools |
|
|
|
1 609 929 M65 | (29.10.07) |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Loading...