Fujikura FSM-80S Single Fiber Splicer
The FSM-80S is core-to-core alignment single fiber splicer,which is designed for splicing single-count optical fiber for telecommunication use.Shock resistance, dust resistance, and rain resistance....
Feature
The FSM-80S is core-to-core alignment single fiber splicer succeeding to FSM-60S. In addition to ruggedized concept, which 60S created, the 80S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for
quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor, and "built-in operation manuals" in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.
Applicable fibres |
SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), |
|
|
||
NZDS (ITU-T G.655),Others |
|
|
|
|
|
Fibre Count |
Single |
|
Cladding diameter |
80 to 150µm |
|
Coating diameter |
100 to 1000µm |
|
Fibre cleaved length |
5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60- |
|
900 |
|
|
|
|
|
Actual average splice |
0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. |
|
loss |
|
|
|
|
|
Splice time |
7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode |
|
Return loss |
60dB or greater |
|
Splicing modes |
100 splicer modes are available |
|
Splice loss estimate |
Several types of core deformations as well as core axis offset are taken into |
|