Specialty Fiber Fusion Splicers
Patented “Split V-groove” clamping system
“Plasma Zone” fiber positioning
Short cleave length capability
Special arc calibration
Dual splice loss estimation
Enhanced sweep arc
Internet firmware update & interface
Production environment friendly design
Zero degree fiber holder position
Fiber profile learning function
Dual PM alignment method FSM-100P Only
|
Specialty |
Fiber Fusion Splicer |
|
Polarization Maintaining Fiber Fusion Splicer |
|
|
|
||||
|
FSM-100M |
|
FSM-100P |
|
|
|
|
|
|
|
PM fiber splicing capability |
|
|
product line |
|
|
|
Fujikura’s new |
|
”splicers are engineered with a robust set of features that offer customers technology and reliability not available elsewhere. The need for |
|||
Accurate, Reliable, and Consistent splicing is expanding to new applications beyond telecommunications. These entirely new |
”fusion splicers from Fujikura |
||||
have been developed to provide the ultimate in performance and flexibility for a variety of customers and markets. |
|
||||
Additional information can be found at www.StateoftheARC.com website which is the central repository of information for all of Fujikura’s state of the art fusion splicer products. Stay tuned to www.StateoftheARC.com for forthcoming additions to the ” family of specialty fusion splicers where incremental capabilities will be revealed.
Specialty Fiber Fusion Splicer Polarization Maintaining Fiber Fusion Splicer
FSM-100M FSM-100P
Fujikura’s new specialty splicers FSM-100M and FSM-100P offer a host of innovative technology to address the rapidly expanding splicing needs for factory, manufacturing, laboratory and R&D applications. These models are introduced as “
” splicers due to their unique capabilities to control the plasma zone of the fusion arc. These capabilities will revolutionize the way users will splice various types of specialty fibers; LDF, low contrast PM, holey structured, etc.
Patented “Split V-groove” clamping system
The FSM-100 series has the revolutionary design clamp system.
-No need to change V-groove or clamp part
-Programmable for any fiber or coating size
- Reliably “captures” fiber for good alignment
φ60 µm
φ500 µm
b
Split v-groove A 
Clamp
Split v-groove B
Applicable fiber:
Glass clamp: cladding dia. φ60 to 500 µmCoating clamp: coating dia. φ100 to φ2000 µm
“Plasma Zone” fiber positioning
The FSM-100 series has two electrode positioning techniques in order to provide unprecedented versatility for each specialty fiber.
Electrode Gap
|
|
1 mm |
|
|
1 mm |
|
|
3 mm |
|
Electrode gap: 1 mm |
|
|
|
||
Electrode gap: 3 mm |
3 mm |
|
|
Electrode |
Electrode |
||
|
|||
|
V Height Shift |
|
|
Electrode |
|
Electrode |
|
100 µm |
±0 µm |
|
|
|
|
300 µm |
Optimum plasma Zone
φ60 µm |
φ125 µm |
φ500 µm |
offset
1 mm |
1 mm |
3 mm |
Loading...