Agilent-81110A
Quick Fact Sheet
Agilent 81110A Pulse Pattern Generator
1 8
1. Display
2. Memory card
3. Channel 2 differential output
4. Channel 1 differential output
5. Trigger out
6. Strobe out
7. Trigger In
43 2567
8. Keypad
The Agilent 81110A pulse pattern generator is the
industry-standard for pulse, pattern, data and PRBS
generation up to 165/330 MHz.
It provides high quality signals and leading flexibility
that meets virtually all application needs. This instrument
is a must for all labs.
Other highlights are:
• The Agilent 81111A 165 MHz 10 V module with variable
transitions.
• The Agilent 81112A 330 MHz 3.8 V module has differential outputs and two selectable transition times.
• Integrated in one instrument, which increases signal
performance, minimizes cabling, space and test time.
• Glitch free change of timing parameters (delay, frequency, transition time, width, delay cycle).
• Programming language compatible with Agilent
81101A, 81104A and 81150A.
Choose your hardware
Code Description
81110A 165/330 MHz mainframe
#DOC Printed documentation, variouslocalizations
#1CP Rackmount kit with handle
#OBW Service docummentation
#UFJ 1 MB SRAM memory card
#UK6 Cal. certificate with test data
#NOC Mainframe only
#UN2 Rear panel connectors
81111A 165 MHz interface, 1 channel
81112A 330 MHz interface, 1 channel
Key specifications Description
81110A Mainframe for 81111A and 81112A
interfaces
Waveforms Pulse, pattern with PRBS, NRZ, RZ,
DNRZ
Channels 1 or 2, differential outputs, BNC
(Single ended for 81111A)
Output amplifier
81111A
81112A
Transition time (10/90)
81111A
81112A
Output impedance 50 Ω/1 kΩ selectable
Pattern memory 16 kBit/channel
Programming
interfaces
Supported drivers Agilent VEE, NI Labview
165 MHz, 100 mV to 10 V
330 MHz, 100 mV to 3.8 V
2.5 ns to 100 ms, variable
800 ps or 1.6 ns
LAN, SCPI 1992, IEEE 488.2 (GPIB)
Loading...