AEG KD91403E, KD91404E, KD92903E User Manual

0 (0)
AEG KD91403E, KD91404E, KD92903E User Manual

2

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler - features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

ACCESSORIES AND CONSUMABLES

need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate

Visit the webshop at:

www.aeg-electrolux.com/shop

3 Contents

Contents

4 Installation instructions

6 Safety Instructions

8 Appliance Description

9 Use

12 Load capacity

13 Cleaning and Maintenance

14 What should I do if the crockery

28 Installation

The following symbols are used in this user manual:

Important information concerning your personal safety and information on how to avoid damaging the appliance.

General information and tips.

Environmental information.

Installation instructions

4

 

 

INSTALLATION INSTRUCTIONS

Before installation

Check that the input voltage indicated on the characteristics plate is the same as the voltage of the power outlet you are going to use.

Open the drawer and take out all the accessories and remove the packing material. Attention! The front surface of the crockery heater may be wrapped in a protective film. Before using the crockery warmer for the first time, remove this film carefully.

Make sure that the crockery warmer is not damaged in any way. Check that the drawer opens and closes correctly. If you find any damage, contact the Technical Assistance Service.

Attention: the power socket should be easily accessible after the crockery warmer has been installed.

The crockery warmer should only be built-in in combination with those appliances indicated by the manufacturer. If it is fitted in combination with other appliances, the guarantee is no longer valid since it is impossible to guarantee that the crockery warmer will work correctly.

Installation

To build-in the crockery warmer in combination with another appliance there must be a fixed, interim shelf in the housing unit to support the weight of both appliances.

The appliance to be combined with the crockery warmer will be placed directly on the latter without any need to have a separating shelf.

To build-in the appliance which is combined with the crockery warmer, follow the instructions set out in the respective instructions and fitting booklet.

The relevant installation dimensions are indicated in mm in the diagrams shown at the end of this booklet. Proceed as follows:

1.Place the crockery warmer on the shelf and slide it towards the interior of the niche in such a way that it is centred and completely lined up with the front of the unit.

2.Check that the crockery warmer’s frame is properly levelled and is sitting evenly on the shelf.

3.Open the drawer and fix the crockery warmer to the sides of the unit using the provided screws.

5 Installation instructions

Electrical Connection

Electrical installation must be performed by an electrician qualified in accordance with the legislation in force.

Before connecting the crockery warmer to the electric mains, check that the voltage and frequency of the mains matches that which is shown on the rating plate located in the heating block inside.

The electric connection is made via an omnipolar switch, which is suitable for the intensity to be tolerated and which has a minimum gap of 3mm between its contacts, which will ensure disconnection in case of emergency or when cleaning the crockery warmer.

If a plug is used for the electric connection, then it must be accessible after installation. The connection should include correct earthing, in compliance with current norms.

WARNING: THE CROCKERY WARMER MUST BE EARTHED.

If the flexible supply cable fitted to the crockery warmer ever needs to be changed, it should be replaced by an official After Sales Service, because it requires special tools. The manufacturer and retailers do not accept responsibility for any damage that may be caused to people, animals or property if these installation instructions are not observed.

Safety instructions

6

 

 

SAFETY INSTRUCTIONS

Warning! Before connecting the appliance compare the power data (voltage and frequency) indicated on the characteristics plate with those of the power supply in question. If these data do not match there may be problems. In case of doubt, contact an electrician.

Warning! If the electrical wire plug is removed, the appliance must be installed and connected by a technician. Contact a qualified electrician who knows and respects current safety standards. The manufacturer cannot be held responsible for damage resulting from fitting or connecting errors.

Warning! The electrical safety of the appliance can only be guaranteed if it is earthed. The manufacturer cannot be held responsible for damage resulting from the absence of

Warning! Only use the appliance once it has been fitted into its built-in position. Only in this manner can it be guaranteed that users cannot access the electrical components. Warning! conducting parts or changes to electrical or mechanical components may represent a

Warning! Repairs and maintenance, especially of parts carrying electrical current, must only be done by technicians authorised by the manufacturer. The manufacturer and retailers do not accept responsibility for any damage caused to people, animals or property as a result of repairs and maintenance carried out by non-authorised personnel. Warning! Repairs undertaken during the guarantee period must only be done by technicians authorised by the manufacturer. If this is not the case then any damage resulting from the repair in question is excluded from the guarantee.

Warning! The appliance must be disconnected from the electrical current when installation and repair work is being done. To disconnect the appliance from the current, one of the following conditions must apply:

The switchboard fuses / circuit breakers must be disconnected.

The plug should be removed from the socket. To remove the plug from the socket do not pull on the electric cable but rather pull out the plug itself directly.

7 Safety instructions

Precautions during use

This appliance complies with current safety standards. Improper use of the appliance may put the user at risk.

Read the operating instructions carefully before using the appliance for the first time. In this way you will avoid the risk of injuring yourself or damaging the appliance.

The crockery warmer is solely for domestic use!

The manufacturer does not accept responsibility for breakdowns or faults arising from improper or erroneous use of the appliance.

Depending on the temperature selected and the operating time, the temperature inside the appliance may reach 80 ºC. To take crockery out of the crockery warmer protect your hands by using oven gloves or an oven cloth.

Take special care with children and do not allow them to play close to the appliance. If the appliance is inadvertently switched on it will heat up and may cause serious burns.

Children should only be allowed to use the appliance without direct adult supervision if they have been given instructions on how to use the appliance safely and how to identify dangerous situations that may arise if the appliance is used in an improper manner.

Do not sit or hang on the drawer. The telescopic runners will be damaged. The maximum load capacity of the drawer is 25 kg.

Do not store synthetic containers or easily inflammable objects inside the crockery warmer. When you switch on the appliance such containers and objects may melt or catch fire. Fire danger.

Do not use the appliance to heat up the air temperature in the kitchen. The high temperatures reached may cause easily inflammable objects close to the appliance to catch fire.

Do not use high pressure or steam jet cleaning devices. The steam may affect electrical components and cause a short circuit. The steam pressure may also cause damage to the appliance s surface and components in the long term.

When you stop using the appliance at the end of its working life, disconnect it from the power supply and render the electrical cable unusable so that the appliance is not a danger if, for example, children use it for playing.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities; or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Warning: Accessible parts may become hot during use. Children should be kept away.

Appliance description

8

 

 

APPLIANCE DESCRIPTION

Main Components

 

1

Function selector

4

Handle

 

 

 

 

2

On/Off switch

5

Anti-Slip mat

 

 

 

 

3

Control Lamp

6

Drawer Grid *

 

 

 

KD91403E / KD92903E

 

 

KD91404E

 

 

 

 

 

 

 

6

*Drawer Grid only available with the model KD92903E

How the crockery warmer works

This appliance is equipped with a warm air circulation system. A fan distributes the heat generated by an electrical heating element throughout the interior of the appliance. The thermostat allows the user to define and control the temperature wanted for the crockery.

The circulating hot air that is generated heats up the crockery quickly and evenly. A metal grille protects both the heating element and the fan.

The base of the drawer is fitted with a non-slip mat to prevent plates and dishes sliding around when the drawer is opened and closed.

9 Use

USE

Before using for the first time

Before using the appliance for the first time you should clean the interior and the

Then heat the crockery warmer for at least 2 hours. For this, turn the temperature

Make sure the kitchen is well-ventilated when you are doing this.

heating an odour will be released. Both the odour and any smoke that may form will disappear after a short time and neither signifies that there is anything wrong with the connection or the appliance.

Control Panel

The control panel has a function and the on/off switch. The control panel is only visible when the drawer is open.

Using the crockery warmer

To use the crockery warmer, proceed as follows:

Put the crockery in the drawer.

Select the function you want by turning the thermostat control to the desired position.

Switch on the appliance by pressing the switch, which will light up.

Close the drawer.

Be careful not to use too much force when closing the drawer since it may open up again. Before taking out the warm crockery you must switch off the crockery warmer by pressing the switch again.

Use 10

Selecting function

By turning the thermostat control you can select temperatures between 30 and 80 °C.

the maximum position since this may damage the appliance.

As soon as the temperature selected is reached, the heating is turned off. When the temperature drops to a value below that selected, the heating is turned back on.

The temperature scale is not marked with absolute temperatures in ºC but instead has symbols which correspond to the optimum temperatures for groups of crockery:

Symbol

ºC

Function

 

30ºC

Defrosting

 

40ºC-

Proving dough

 

50ºC

Cups / glasses warming

 

 

 

60ºC-

Crockery warming

 

70ºC

Keep food warm

 

 

 

80ºC

Low temperature cooking

 

 

Food Warming

Heating times

Various factors affect heating times: Material and thickness of the crockery; Load quantity;

How the crockery is arranged; Temperature setting.

It is therefore not possible to give any precise heating times.

As you use the crockery warmer more and more you will learn the best settings for your crockery.

However, as a guide, the following times are given for the thermostat setting and for uniform heating of the crockery:

 

 

 

 

 

 

Load

 

Time (min)

 

 

 

 

 

 

 

Crockery for 6 people

 

30 35

 

 

 

 

 

 

Crockery for 12 people

 

40 – 45

 

 

 

 

 

 

 

 

 

Suggestions for the function Keep Food Warm and Food Warming:

Preheat the Warming Drawer 15 minutes to ensure the interior space has the required temperature.

11 Use

Low temperature cooking 80° C

With the low temperature cooking meat can be gently prepared at low temperatures over a longer period of cooking time. The cooking time is dependent on the piece of Use dishes made of glass, china or ceramics.

Preparation:

Preheat the device with the dishes at 80°C for 10 minutes.

Sear the meat in a pan using fat and place it into the heat drawer on the preheated dishes. Keep the setting at 80° C.

Table: Low Temperature Cooking (Reference Values)

 

 

Roast gently on the cooking

 

 

 

Application

Quantity

plate

Cooking times

Beef

 

 

 

 

 

Completely rare

1kg

on all sides, on each 2min.

 

1hr

Rare

1kg

on all sides, on each 3min

1.25hrs

Medium

1kg

on all sides, on each 3min

1.75 hrs

Well-done

1kg

on all sides, on each 3min

2.25hrs

2.5hrs.

 

 

 

3 hrs rare

Roast beef in one

 

 

4.5 hrs medium

piece

1kg

on all sides, on each 3min

 

 

 

Veal

 

 

 

 

 

Filet, whole

1kg

on all sides, on each 2min.

1.75

2hrs.

Loin, in one piece

1kg

on all 4 sides, on each 3min.

2

2.5hrs.

Roast, vat

1kg

on all sides, on each 3min.

2

2.5hrs.

Roast, shoulder

1kg

on all sides, on each 3min.

2.5hrs.

Porc

 

 

 

 

 

Filet, whole

500-600 g

on all sides, on each 2min.

1.5hrs

Loin

600 -1000g

all around 10-15min.

2 - 3hrs

Lamb

 

 

 

 

 

Gigot with haunch

2kg

on all sides, on each 4min.

3

 

4hrs

Gigot steak of the

 

 

 

 

 

haunch

2kg

on all sides, on each 2min

0.75-1hr

Filet

400g

on all sides, on each 2min

1

1.25hrs.

If you wish to keep the cooked meat warm, put the setting back to 60° C. We recommend not to use the warming function for more than 1hr.

Load Capacity

12

 

 

LOAD CAPACITY

Load capacity depends on the size of the crockery items:

KD 91403 E / KD 91404 E

KD 92903 E

 

6 persons servings

12 persons servings

 

6 x 24cm Dinner Plates

12 x 24cm Dinner Plates

 

6 x 10cm Soup Bowls

12 x 10cm Soup Bowls

 

1 x 19cm Serving Dish

1 x 19cm Serving Dish

 

1 x 17cm Serving Dish

1 x 17cm Serving Dish

 

1 x 32cm Meat Plates

2 x 32cm Meat Plates

 

or

or

 

20 dishes with 28 cm

40 dishes with 28 cm

 

or

or

 

80 espresso coffee cups

160 espresso coffee cups

 

or

or

 

40 tea cups

80 tea cups

 

or

or

 

 

 

 

 

 

 

 

 

13 Cleaning and maintenance

CLEANING AND MAINTENANCE

Cleaning is the only maintenance action that is required normally.

Warning! Cleaning must be done with the crockery warmer disconnected from the electrical power supply. Remove the plug from the power socket or disconnect the crockery warmer power supply circuit.

Do not use aggressive or abrasive cleaning products, abrasive sponges or pointed objects since stains or abrasion marks may appear.

Do not use high pressure or steam jet cleaning appliances.

Appliance front and control panel

The crockery warmer can be cleaned using just a damp cloth. If it is very dirty, add a few drops of washing-up liquid to the washing water.

Wipe the surfaces dry using a dry cloth.

For stainless steel fronted crockery warmers, special products for treatment of stainless steel surfaces can be used. These products prevent the surfaces becoming dirty again for some time. Apply a thin layer of such a product on the surface using a soft cloth.

On aluminium fronted crockery warmers use a gentle glass cleaning product and a soft cloth that does not release fluff. Wipe horizontally without pressing on the surface since aluminium is sensitive to scratches and cuts.

Interior of the crockery warmer

Clean the inside of the crockery warmer regularly using a damp cloth. If it is very dirty add a few drops of washing-up liquid to the washing water.

Wipe the surfaces dry using a dry cloth.

Avoid water entering through the air circulation opening. Only use the crockery warmer again when it is completely dry.

Mat with non-slip surface

The non-slip surface mat can be removed to facilitate cleaning of the drawer. The mat can be cleaned by hand using hot water with a few drops of washing-up liquid. Dry thoroughly.

The non-slip mat should only be replaced when it is completely dry.

14

WHAT SHOULD I DO IF THE CROCKERY WARMER

WARNING! Any type of repair must only be done by a specialised technician. Any repair done by a person not authorised by the manufacturer is dangerous.

Before contacting Technical Assistance, check on the following: The c Check whether:

The appliance has been switched on.

The appropriate temperature has been selected.

The air circulation orifices are covered by the crockery. The crockery was left to heat up for sufficient time.

Heating time depends on several factors, such as, for example:

Crockery material type and thickness. Quantity of crockery.

How the crockery is arranged.

You can hear the noise of a fan. If the fan is operating then the heating element is broken; if the fan is not operating then the fan is broken.

The switchboard fuses / circuit breakers have fused / tripped out.

The crockery is heating up too much:

The temperature selector is broken.

The on/off switch does not light up:

15

FÜR PERFEKTE ERGEBNISSE

Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es ist mit Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Nehmen Sie sich ein paar Minuten Zeit zum Lesen, um seine Vorzüge kennen zu lernen.

ZUBEHÖR UND VERBRAUCHSMATERIALIEN

Im AEG Webshop finden Sie alles, was Sie für ein makelloses Aussehen und perfektes Funktionieren Ihrer AEG Geräte benötigen. Wir bieten auch ein umfangreiches Zubehörsortiment, das Ihre höchsten Qualitätsansprüche erfüllt, vom Profi-Kochgeschirr bis zu Besteckkörben, von Flaschenhaltern bis hin zu Wäschebeuteln für empfindliche Wäsche...

Besuchen Sie den Webshop unter:

www.aeg-electrolux.com/shop

Inhaltsverzeichnis 16

INHALTSVERZEICHNIS

17 Installationsanleitung

19 Sicherheitshinweise

21 Gerätebeschreibung

22 Bedienung

25 Fassungsvermögen

26 Reinigung und Pflege

27 Was ist im Falle einer Funktionsstörung zu tun?

28 Einbau

Die folgenden Symbole werden in diesem

Handbuch verwendet:

Wichtige Informationen für ihre persönliche Sicherheit wie auch Informationen darüber wie das Gerät benutzt werden soll um es nicht zu beschädigen.

Allgemeine Informationen und Tipps.

Informationen über Umwelt.

17 Installationsanleitung

INSTALLATIONSANLEITUNG

Vor der Installation

Überprüfen Sie, dass die Versorgungsspannung, die auf dem Typenschild angegeben ist, mit Ihrer Netzspannung übereinstimmt.

Öffnen Sie die Schublade und entnehmen Sie alle Zubehörteile sowie das Verpackungsmaterial.

Achtung! Die Vorderseite der Schublade kann mit einer Schutzfolie versehen sein. Ziehen Sie diese Folie vor der ersten Benutzung des Gerätes Ofens vorsichtig ab, indem Sie an deren Unterseite beginnen.

Vergewissern Sie sich, dass die Wärmeschublade nicht beschädigt ist. Überprüfen Sie, ob die Schublade richtig schließt Benachrichtigen Sie den Kundendienst im Falle von vorhandenen Schäden.

Achten Sie darauf, dass die Steckdose nach Einbau des Gerätes leicht zugänglich ist, ausserhalb der Gerätenische.

Der Geschirrwärmer darf ausschließlich in Kombination mit den vom Hersteller angegeben Geräten eingebaut werden. Bei Kombination mit anderen Geräten erlischt der Garantieanspruch, da die Gewähr für einen ordnungsgemäßen Betrieb nicht mehr gegeben ist.

Einbau

Für den Einbau von Geschirrwärmer und Kombinationsgerät muss ein fest eingebauter Zwischenboden vorhanden sein, der die erforderliche Tragfähigkeit für beide Geräte gewährleistet.

Das Kombinationsgerät wird ohne weiteren Zwischenboden direkt auf den eingebauten Geschirrwärmer gestellt.

Beachten Sie für den Einbau des Kombinationsgerätes unbedingt die Informationen der jeweiligen Gebrauchsbzw. Montageanweisung.

Die wichtigen Masse für den Einbau werden in mmauf den letzten Seiten dargestellt. Wie folgt vorgehen:

1.Stellen Sie das Gerät bis zur Schwadenleiste in den Umbauschrank und richten Sie es aus.

2.Achten Sie darauf, dass das Gehäuse des Gerätes rechtwinklig ausgerichtet wird.

3.Öffnen Sie die Schublade und befestigen Sie das Gerät mit den mitgelieferten Schrauben an den Seitenwänden des Schrankes.

Installationsanleitung 18

Elektroanschluss

Der Elektroanschluss muss von einem qualifizierten Techniker gemäß der geltenden Gesetzgebung durchgeführt werden.

Vor Anschluss der Wärmeschublade an das Hauptnetz muss sichergestellt werden, dass Spannung und Frequenz des Hauptnetzes den Angaben des Typenschilds entsprechen. Dieses befindet sich im Innern des Heizblocks.

Der Elektroanschluss erfolgt über einen allpoligen Schalter, der für die entsprechende Stromstärke geeignet ist. Dieser Schalter sollte einen Mindestabstand von 3 mm zwischen den Kontakten aufweisen, sodass eine Unterbrechung im Notfall bzw. bei einer Reinigung der Wärmeschublade möglich ist. Falls für den Elektroanschluss ein Stecker verwendet wird, so muss nach der

Installation der Zugriff auf diesen Stecker gewährleistet sein.

Der Anschluss muss mit einer angemessenen Erdung gemäß dem geltenden Vorschriften ausgestattet sein.

ACHTUNG: DIE WÄRMESCHUBLADE MUSS GEERDET SEIN.

Das Auswechseln des biegsamen Stromkabels an der Wärmeschublade sollte nur von einem qualifizierten Kundendienstmitarbeiter vorgenommen werden, da hierfür besonderes Werkzeug erforderlich ist.

Der Hersteller und der Wiederverkäufer lehnen jegliche Haftung für eventuelle Schäden ab, die Personen, Tieren oder Sachen infolge der Nichtbeachtung der vorliegenden Installationsanleitung zugefügt werden.

Loading...
+ 41 hidden pages