EN DE
User manual |
2 |
Benutzerinformation |
29 |
Washing Machine
Waschmaschine
ZWF 1222 ZWF 1422
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 |
Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 |
Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 |
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 |
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 |
Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19 |
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 |
Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 22 |
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 |
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 22 |
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 |
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 24 |
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 |
|
|
Subject to change without notice |
Safety information |
|
Important! Read carefully and keep for future reference.
•The safety of your appliance complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes.
•It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
•You MUST read them carefully before installing or using the appliance.
•Before first starting up, check the appliance for any damage incurred during transport. Never connect up a damaged appliance . If parts are damaged, contact your supplier.
•If the appliance is delivered in the winter months when there are minus temperatures. Store it at room temperature for 24 hours before using for the first time.
•This appliance is made for use in a normal domestic situation. The manufacturer is not responsible for freezing damages. Read "Frost precaution".
General safety
•It is dangerous to alter the specifications or attempt to modify this product in any way.
•During high temperature wash programmes the door glass may get hot. Do not touch it!
•Make sure that small children and pets do not climb into the drum. To avoid this, please check inside the drum before using.
2
•Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the appliance.
•Only use the advised quantities of fabric softener and detergent. Damage to the fabric can ensue if you overfill. Refer to the manufacturer’s recommendations of quantities.
•Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.
•Do not use your appliance to wash articles with whalebones, material without hems or torn material.
•Always unplug the appliance and turn off the water supply after use, cleaning and maintenance.
•Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
Installation
•This appliance is heavy. Care should be taken when moving it.
•All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.
•This appliance is free standing only. DO NOT build it in under a counter and DO NOT remove the worktop for any reason.
•After having installed the appliance, check that it is not standing on the inlet and drain hose and the work-
top is not pressing the electrical supply cable against the wall.
•Install the appliance on a flat hard floor.
•Never place cardboard, wood or similar materials under the appliance to compensate for any unevenness in the floor.
•If the appliance is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely under the appliance.
•Check that the appliance does not touch the wall or other kitchen units.
•This appliance must be connected to a cold water supply.
•Do not use the hose from your previous appliance to connect to water supply. Always use the hose supplied with the appliance.
•The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use.
•Always be sure, that there is no water leakage from hoses and their connections after the installation.
•If the appliance is installed in a location subject to frost, please read the “Frost precaution” chapter. Manufacturer decline any responsibility for freezing damages.
•Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
•Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Use
•This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.
•Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label.
•Do not overload the appliance. See the "Washing Programme Chart".
•Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.
•The detergent dispenser drawer is provided with an insert for liquid detergent. Do not use the insert downwards for gelatinous detergents, with programmes including prewash, with the delay start option. In all these cases you can use metering balls or sachets provided with the detergent, Take out the metering aid at the end of the washing cycle.
•Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the appliance.
•Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.
•Never use the appliance if the power supply cable, the control panel, the working surface or the base are damaged so that the inside of the appliance is accessible.
Child safety
•This appliance is not intended for use by people (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach.
•Keep all detergents in a safe place out of children’s reach.
•Make sure that children or pets do not climb inside the drum. To prevent children and pets becoming trapped inside the drum this appliance incorporates a special feature.
3
To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin.
To disable this device and restore the possibility of closing the door, rotate the button anti-clock- wise until the groove is vertical.
Frost precaution
If the appliance is installed in a place where the temperature could drop below 0°C, proceed as follows to remove any water remaining inside the appliance:
1.unplug the appliance;
2.turn off the water tap;
3.unscrew the water inlet hose from the tap;
4.unscrew the drain hose from the rear support and unhook it from sink or spigot;
5.place a bowl on the floor;
6.let the drain hose run along the floor, place the external extremities of the drain and inlet hoses in the bowl placed on the floor and let water drain out completely;
7.screw the water inlet hose to the tap and the drain hose to the rear of the appliance again;
When you intend to start the appliance up again, make sure that the room temperature is above 0°C.
Environment concerns
The symbol 
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product,
4
please contact your local council, your household waste disposal service or the shop where you purchased the product.
Packaging materials
The materials marked with the symbol 
are recyclable. >PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of them properly in appropriate collection containers.
Ecological hints
To save water, energy and to help protect the environment, we recommend that you follow these tips:
•Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).
•The machine works more economically if it is fully loaded.
•With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.
•Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed.
Product description
1 |
|
2 |
|
3 |
|
7 |
11
8
9
|
4 |
|
9 |
|
|
|
9 |
|
5 |
|
10 |
|
|
|
12 |
|
6 |
|
|
1 |
Detergent dispenser drawer |
7 |
Water drain hose |
2 |
Worktop |
8 |
Drain hose support |
3 |
Control panel |
9 |
Hose holders |
4 |
Door opening handle |
10 |
Water inlet hose |
5 |
Rating plate (on the inner edge) |
11 |
Mains cable |
6 |
Front adjustable feet |
12 |
Back adjustable feet |
Technical data
Dimensions |
|
Width |
60 cm |
|
|
Height |
85 cm |
|
|
Depth |
50 cm |
Electrical connection |
|
Information on the electrical connection is given on the rating plate, on the |
|
|
|
inner edge of the appliance door. |
|
|
|
|
|
5
Water supply pressure |
|
Minimum |
0,05 MPa |
|
|
Maximum |
0,8 MPa |
Maximum Load |
|
Cotton |
6 kg |
Spin Speed |
|
Maximum |
1200 rpm (ZWF1222) |
|
|
|
1400 rpm (ZWF1422) |
|
|
|
|
Installation
Unpacking
Warning!
•Read carefully the "Safety information" chapter before installing the appliance.
|
x 3 |
A |
B x 3 |
x 1
C
x 2
Warning! Remove and keep all transit devices so that they can be refitted if the appliance ever
has to be transported again. Necessary tools
10 mm
30 mm
• Remove the external film. Use a cutter, if necessary.
•Remove the cardboard top.
•Remove the polystyrene packaging materials.
|
• Spread the front piece |
1 |
on the floor behind the |
appliance and then lay |
|
2 |
the appliance carefully |
rear side down on it. |
|
|
Make sure that no ho- |
|
ses are crushed in the |
|
process. |
• Remove the polystyrene base from the bottom.
• Return appliance to it's upright position.
• Open the door and remove the plastic hose guide, the bag containing the instruction booklet and the plastic plug caps from the drum.
6
•Remove the power supply cable and the draining and inlet hose from the hose holders ( C ) on the rear of the appliance.
•Unscrew the three bolts ( A ) and remove the hose holders ( C ).
•Slide out the relevant plastic spacers ( B ).
•Plug the smaller upper hole and the two large ones with the corresponding plastic plug caps.
Positioning and levelling
x 4
Level the appliance by raising or lowering the feet. The appliance MUST be level and stable on a flat hard floor. If necessary, check the setting with a spirit level. Any necessary adjustment can be made with a spanner.
7
Accurate levelling prevents vibration, noise and displacement of the appliance during operation.
Repeat the levelling action, if the appliance is not level and stable.
Water inlet
Connect the hose to a tap with a 3/4” thread.
35° |
45° |
Loosen the ring nut to angle the hose to the left or right depending on the position of your water tap. Do not place the inlet hose downwards. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks.
Water drainage
8
Firstly form a hook in the end of the drain hose using the plastic hose guide supplied with the appliance .
The end of the drain hose can be positioned in three ways:
•Hooked over the edge of a sink using the plastic hose guide.
Tie the plastic hose guide to the tap with a string to prevent that the drain hose unhooks when the appliance is emptying.
• Onto a sink outlet spigot.
Push the drain hose onto the spigot and secure with a clip, ensure a loop is formed in the drain hose to prevent waste from the sink entering the appliance.
If the outlet spigot has not been used before, remove any blanking plug that may be in place.
•Directly into a drain pipe at a height of not less than 60 cm and not more than 100 cm.
|
The end of the drain hose |
|
100cm |
must always be ventila- |
|
ted , i.e. the inside diame- |
||
ter of the drain pipe must |
||
MAX |
||
be larger than the outside |
||
|
||
|
diameter of the drain |
|
|
hose. The drain hose |
|
|
must not be kinked. |
• Directly to a built-in drain pipe in the room wall.
The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining
piece is available from your Local Centre.
Connections overview
115 cm |
140 cm |
115 cm |
90 cm |
100cm |
60cm |
150 cm |
max |
100 cm |
|
min. |
|
60 cm |
100 cm |
min. |
max |
Electrical connection
•The appliance must be earthed.
•Make sure that the electrical information on the rating plate agree with your domestic power supply.
•Always use a correctly installed shockproof socket.
•Do not use multi-way plugs, connectors and extension cables. There is a risk of fire.
•Do not replace or modify the mains cable yourself. Contact the After Sales Service.
First use
•Make sure that the mains plug and cable is not squashed or damaged by the back of the appliance.
•Make sure that the mains plug is accessible after installation.
•Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
•This appliance complies with the E.E.C. Directives.
•Ensure that the electrical and water connections comply with the installation instructions.
•Ensure that the drum is empty.
•Before the first wash, run a cotton cycle at the highest temperature without any laundry in the
machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment and start the machine.
9
Personalisation
Buzzer
The appliance is provided with an acoustic device, which sounds in the following cases:
•at the end of the cycle;
•if there is a fault.
By pressing the 4 and 5 buttons simultaneously for about 6 seconds , the acoustic signal is deactivated (except if there is a fault). By pressing these 2 buttons again, the acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance unattended so you do not need to worry that children might be injured by or cause damage to the appliance. This function remains enabled also when the appliance is not working.
There are two different ways to set this option:
1.Before pressing button 9 : it will be impossible to start the appliance.
2.After pressing button 9 : it will be impossible to change any other programme or option.
To enable or disable this option press simultaneously for about 6 seconds buttons 2 and 3 until on the display, the
icon 
appears or disappears.
Daily use
Sort out the laundry
Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens.
Before Loading The Laundry
Important! Make sure that no metal objects are left in the laundry (e.g. hair clips, safety pins, pins). Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes. Remove any hooks (e.g curtains).
•Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash.
•New coloured items may run in the first wash; they should therefore be washed separately the first time.
•Rub particularly soiled areas with a special detergent or detergent paste.
•Treat curtains with special care.
1) do not use acetone on artificial silk.
10
• Wash the socks and the gloves inside the bag or a net. Remove stubborn stains before washing:
Blood : treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water.
Oil based paint : moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.
Dried grease stains : moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth.
Rust : oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole.
Mould stains : treat with bleach, rinse well (whites and fast coloureds only).
Grass : soap lightly and treat with bleach (whites and fast coloureds only).
Ball point pen and glue : moisten with acetone1), lay the garment on a soft cloth and dab the stain.
Lipstick : moisten with acetone as above, then treat stains with methylated spirits. Treat any residual marks with bleach.
Red wine : soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach.
Ink : depending on the type of ink, moisten the fabric
first with acetone1) , then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly.
Tar stains : first treat with stain remover, methylated spirits or benzine, then rub with detergent paste.
Open the door by carefully pulling the door handle outwards
Load the laundry
Place the laundry in the drum, one item at a time, shaking them out as much as possible.
Maximum Loads
Recommended loads are indicated in the «Washing Programmes».
General rules:
•Cotton, linen : drum full but not too tightly packed;
•Synthetics : drum no more than half full;
•Delicate fabrics and woollens : drum no more than one third full.
Close the door gently
Warning! Make sure that any fab-
rics were not trapped when closing the door.
Detergents and additives
Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the environment.
Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate balance of nature.
The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling.
All commonly available washing machine detergents may be used in this appliance:
•powder detergents for all types of fabric,
•powder detergents for delicate fabrics (40°C max) and woollens,
•liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of fabric, or special for woollens only.
Quantity of detergent to be used
The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used.
For the quantity of detergent, refer always to what is written on the product packing.
Use less detergent if:
•you are washing a small load,
•the laundry is lightly soiled,
•large amounts of foam form during washing.
Degrees of water hardness
Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority.
If the water hardness degree is medium or high we suggest you to add a water softener following always the manufacturer’s instructions.
When the degree of hardness is soft, readjust the quantity of the detergent.
Open the detergent dispenser drawer
Compartment for powder or liquid detergent used for main
wash. 
Compartment for liquid additives (fabric softener, starch).
11
Warning! If you wish to carry out the prewash, pour the detergent among washing items into the
drum.
Warning! Depending on the type detergent you use (powder of liquid), ensure that the flap, placed
in the main wash compartment, is in the desired position.
Flap for powder or liquid detergent
UPFlap position if us- |
DOWN - Flap position if |
||||||||
ing POWDER detergent |
using LIQUID detergent |
||||||||
|
|
|
|
during main wash |
|
||||
OVE |
LEAN |
PUSH |
|
O |
VE |
LEA |
N |
PUSH |
|
|
M |
|
|
|
|||||
REM |
C |
|
|
R E |
TO |
|
C |
|
|
TO |
|
|
|
|
|
|
|
|
|
• Measure out the detergent.
• Pour the powder detergent into the main wash compart-
ment 
.
The flap is up and you wish to use liquid detergent:
• Rotate the flap downwards.
• Carefully put the drawer back.
If the flap is not in the desired position :
•Remove the drawer. Push the drawer edge outwards where indicated by the arrow (PUSH) to facilitate drawer removal.
The flap is down and you wish to use powder detergent:
• Rotate the flap upwards. Ensure to fit the flap completely in.
• Carefully put the drawer back.
12
• Measure out the detergent.
For the quantity of detergent, refer always to what is written on the product packing and en-
sure that the detergent can be poured in the drawer.
•Pour the liquid detergent in the compartment
without exceeding the limit indicated in the flap. The detergent must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme.
Warning! Do not use the flap in "DOWN" position with:
•Gelatinous detergent or thick detergent.
•Powder detergent.
•With programmes with prewash.
•Do not use liquid detergent if the washing programme doesn't start immediately.
In all above listed cases, use the flap in "UP" position .
Measure out the fabric softener |
Close the detergent dispenser drawer |
Pour fabric softener or any additives into the
compartment marked 
(do not exceed the
«MAX» mark in the drawer). Any additives must be placed in the appropriate compartments of the dispenser drawer just before starting the wash programme.
Set your washing programme
The control panel permits to select a washing programmes and different options.
When an option button is selected, the corresponding pilot light is on. Otherwise it is off.
For compatibility among washing programmes and options, see the "Washing Programmes". If an incorrect option is selected, the integrated red pilot light of the button 9 flashes 3 times and the display shows the
message Err .
7 |
|
8 |
+ |
1200 |
|
900 |
|
700 |
1 |
|
2 |
|
3 |
|
4 |
|
5 |
|
6 |
|
9 |
|
10 |
13
1
2
3
4
14
Programme selector dial
Temperature button
90°
60° 40° 30°
Spin reduction
1200
900
700
Rinse Hold
Turn the programme selector dial to the required programme. The selector dial can be turned either clockwise or counter-clockwise. The green pilot light of the button 9 starts flashing: the appliance is now switched on.
If you turn the programme selector dial to another programme when the appliance is working, the red pilot light of the button 9
will flash 3 times and the message Err is displayed to indicate a wrong selection. The appliance will not perform the new selected programme.
•To switch the appliance off , turn the programme selector dial to the position 
.
•To cancel or change a running programme, switch the appliance off
by turning the programme selector dial to the position 
. Select the new programme by turning the selector to the desired programme. Start the new programme by pressing the button 9 again. The water in the tub will be not emptied out.
Push the temperature button to select the most suitable temperature for washing your laundry .
Cold : Cold wash.
By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a different speed. The relevant light illuminates.
By pressing this button the corresponding pilot light illuminates.
By selecting this function the water of the last rinse is not emptied out to prevent the fabrics from creasing. Before opening the door it will be necessary to empty out the water.
To empty out the water, please read the paragraph «At the end of the programme».
Super Quick
5
Extra Rinse
By pressing this button the corresponding pilot light illuminates.
Short cycle for lightly soiled items or for laundry which needs only freshening up.
With this option, a reduced load of laundry is recommended:
•Cottons 3 Kg
•Synthetics and delicates 1,5 Kg
This appliance is designed for saving water. However, for people with very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water.
Press simultaneously the buttons 4 and 6 for some seconds:
•the pilot light of button 6 illuminates;
•the extra rinse option is activated and it stays permanently on.
To remove it press the same buttons again until the pilot light of button 6 goes off.
|
Extra Rinse |
|
6 |
Press this button to perform an additional rinse. The corresponding light |
|
illuminates. In this case, the option doesn't stay permanently on. |
||
|
15
Display
77.1 
7.2 
7.3
16
The display shows the following information:
7.1Delay Start icon
7.2Child safety lock
This device permits you to leave the appliance unattended during it's functioning.
7.3
•Duration of the selected programme
After selecting a programme, the duration is displayed in hours and
minutes (for example 
). The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute.
•Delayed start
The selected delay set by pressing the relevant button appears on the display for a few seconds, then the duration of the selected programme is displayed again. The delay time value decreases by one unit every hour and then, when 1 hour remains, every minute.
•Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example 
(see paragraph «What to do if...»).
•Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed at the bottom of the display for a few seconds and the integrated red light of button 9 start flashing.
•End of programme
When the programme has finished a zero ( 
) is displayed, the door pilot light 10 and the pilot light of button 9 go out and the door can be opened.
|
The programme can be delayed from 30 min - 60 min - 90 min, 2 hours |
|
and then by 1 hour up to a maximum of 20 hours by means of this button. |
|
Before you start the programme, if you wish to delay the start, press this |
|
button to select the desired delay. |
|
The selected delay time value will appear on the display for a few sec- |
|
onds, then the duration of the programme will appear again. |
|
You must select this option after you have set the programme and before |
|
you start the programme. |
|
You can cancel or modify the delay time at any moment, before you |
|
press button 9 . |
|
Selecting the delay start : |
|
• Select the programme and the required options. |
|
• Select the delay start by pressing button 8 . |
|
• Press button 9 : |
8 |
– the appliance starts its hourly countdown. |
|
|
|
– the programme will start after the selected delay has expired. |
|
Cancelling the Delay Start after having started the programme: |
|
• Set the appliance to PAUSE by pressing button 9 . |
|
• Press button 8 once. On the display will appear ' . |
|
• Press button 9 again to start the programme. |
• The selected delay can be changed only after selecting the washing programme again.
•The door will be locked throughout the delay time. If you need to open the door, you must first set the appliance to PAUSE by pressing button 9 and wait a few minutes before opening the door. After you have closed the door, press the same button again.
The Delay Start cannot be selected with the draining programme.
17
9
10
Start the programme by pressing the button 9
•To start the selected programme, press the button 9 , the corresponding green pilot light stops flashing. The pilot light 10 illuminates to indicate that the appliance starts operating and the door is locked. If you have chosen a delayed start, the appliance will begin the countdown.
•To interrupt a programme which is running, press the button 9 : the corresponding green pilot light starts flashing. It is possible
to change some options of a running programme before the programme carries them out.
•To restart the programme from the point at which it was interrupted, press the button 9 .
•After the programme has started the door is locked. If, for any reason, you need to open the door , set firstly the appliance to PAUSE by pressing the button 9 . After a few minutes it will be possible to open the door. If the door remains locked, this means that the appliance is already heating or that the water level is too high. In any case, do not try to force the door!
If you cannot open the door but you need to open it you have to
switch the appliance off by turning the selector dial to 
. After a few minutes the door can be opened ( pay attention to the water level and temperature! ). After closing the door, it is necessary to select the programme and options again and to press the button 9 .
The pilot light 10 illuminates when the programme starts and indicates if the door can be opened:
•light on: the door cannot be opened. The appliance is working or has stopped with water left in the tub.
•light off: the door can be opened. The programme is finished or the water has been emptied out.
•light blinking: the door is opening in a few minutes.
At the end of the programme
The appliance stops automatically. The pilot light of the button 9 and the pilot light 10 go off. The display shows a zero.
If a programme or an option that ends with water left in the tub has been selected, the pilot light 10 remains on and the door is locked to indicate that the water must be emptied out before opening the door.
Follow the below instructions to empty out the water:
•Turn the programme selector dial to 
.
•Select the draining or spinning programme.
•Reduce the spin speed if needed, by pressing the relevant button.
•Press the button 9 .
18
At the end of the programme, the door can be now
opened. Turn the programme selector dial to 
to switch the appliance off.
Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
Warning! If there are children or pets in the house, activate the child safety device in the inner
side of the door frame (for more details read " Child safety" in the chapter "Safety Information").
Stand by : during programme setting up and once the programme has finished, if the programme selector dial and any button are not touched, after a few minutes the energy saving system is enabled. The pilot lights and
Loading...