EN |
User manual |
2 |
|
|
Washing Machine |
|
|
|
|
|
|
|
|
|
|
ZWF 14069W
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 |
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12 |
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 |
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15 |
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 |
Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15 |
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 |
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 16 |
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 |
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 18 |
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 |
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 21 |
Washing Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 |
|
|
Subject to change without notice |
Safety information |
|
Important! Read carefully & keep for future reference.
•The safety of Your appliance complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes.
•It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
•You MUST read them carefully before installing or using the appliance.
•Before first starting up, check the appliance for any damage incurred during transport. Never connect up a damaged appliance . If parts are damaged, contact your supplier.
•If the appliance is delivered in the winter months when there are minus temperatures. Store it at room temperature for 24 hours before using for the first time.
General safety
•It is dangerous to alter the specifications or attempt to modify this product in any way.
•During high temperature wash programmes the door glass may get hot. Do not touch it!
•Make sure that small pets do not climb into the drum. To avoid this, please check into the drum before using.
•Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
2
•Only use the advised quantities of fabric softener and detergent. Damage to the fabric can ensue if you overfill. Refer to the manufacturer’s recommendations of quantities.
•Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.
•Do not use your washing machine to wash articles with whalebones, material without hems or torn material.
•Always unplug the appliance and turn off the water supply after use, cleaning and maintenance.
•Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
Installation
•This appliance is heavy. Care should be taken when moving it.
•When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.
•All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.
•After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall.
•If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely under the appliance.
•Always be sure, that there is no water leakage from hoses and their connections after the installation.
•If the appliance is installed in a location subject to frost, please read the “dangers of freezing” chapter.
•Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
•Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Use
•This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.
•Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label.
•Do not overload the appliance. See the Washing Programme Table.
•Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.
•Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
•Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.
•Never use the appliance if the power supply cable, the control panel, the working surface or the base are damaged so that the inside of the washing machine is accessible.
Child safety
•This appliance is not intended for use by person (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach
•Keep all detergents in a safe place out of children’s reach.
•Make sure that children or pets do not climb into the drum. To prevent children and pets becoming trapped inside the drum this machine incorporates a special feature.
To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin.
To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical.
3
Product description
1 |
Detergent dispenser drawer |
1 |
2 |
|
2 |
Control panel |
|||
|
|
|||
3 |
Door opening handle |
|
|
|
4 |
Rating plate |
|
|
|
5 |
Drain pump |
|
|
|
6 |
Adjustable feet |
|
|
3
4
5
6
Detergent dispenser drawer
Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak detergent is added at the beginning of the wash programme. The stain remover is added during the stain action phase.
Compartment for powder or liquid detergent used for main wash. If using liquid detergent pour it just before starting the programme.
Compartment for liquid additives (fabric softener, starch).
Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer. Any fabric softener or starching additives must be poured into the compartment before starting the wash programme.
Control panel
Below is a picture of the control panel. It shows the programme selector dial as well as the buttons and pilot lights. These are presented by relevant numbers on the following pages.
4
|
|
|
|
1 |
|
|
|
|
|
2 |
|
3 |
|
|
4 |
|
5 |
|
7 |
|
6 |
|
|
Programme selector dial |
|
|
START/PAUSE button |
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
||||||||||||||
1 |
5 |
|
|
|
|
|
|
|||||||||||||||
|
SPIN reduction button |
|
|
DELAY START button |
|
|
|
|
|
|
||||||||||||
2 |
6 |
|
|
|
|
|
|
|||||||||||||||
|
OPTIONS button |
|
|
Indicator pilot lights |
|
|
|
|
|
|
||||||||||||
3 |
7 |
|
|
|
|
|
|
|||||||||||||||
|
EXTRA RINSE button |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
Table of symbols |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Night Cycle |
|
|
|
|
|
|
|
|
Rinse Hold |
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Programme selector dial, spin speed button and available options
Programme Selector Dial
It allows you to switch the appliance on/off and/or to select a programme.
Available options: Spin
By pressing this button you can change the spin speed of the selected programme or to select the Rinse Hold or the Night Cycle option.
Rinse hold
By selecting this function the water of the last rinse is not emptied out to prevent the fabrics from creasing. Before opening the door it will be necessary to empty out the water. To empty out the water, please read the paragraph «At the end of the programme».
Night Cycle
By selecting this function the machine will not drain the water of the last rinse and all spinning phases will be suppressed, so as not to wrinkle the laundry. This washing cycle is very quiet and it can be selected at night or
in times with a more economical power rate. On some programmes the rinses will be performed with more water. Before opening the door it will be necessary to empty out the water. To empty out the water, please read the paragraph «At the end of the programme».
Prewash
By selecting this option the machine performs a prewash cycle before the main wash phase. The washing time will be prolonged. This option is recommended for heavily soiled laundry.
Economy
Only for cottons and synthetic items lightly or normally soiled at a temperature of 40°C or higher. The washing time will be prolonged and the washing temperature will be reduced. You can use this option if you want to wash normally soiled laundry and at the same time save energy.
5
Super Quick
Short cycle for lightly soiled items or for laundry which needs only freshening up. We recommend you to reduce the fabrics loading.
Extra Rinse
This appliance is designed for saving energy. If it necessary to rinse the laundry using an extra quantity of water (extra rinse), select this option. Some additional rinses will be performed. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.
Start Pause
This button allows you to start or to interrupt the selected programme.
Delay Start
The start of the programme can be delayed by 2, 4 or 8 hours by means of this button.
Indicator pilot light (7)
After having pressed the button 5 the light 7.1 (Wash) and 7.2 (Door) illuminate to indicate that appliance is working and the door is locked.
The light 7.2 (Door) indicates if the door can be opened:
•The light is on: the door cannot be opened.
•The light is off: the door can be opened.
•The light is flashing: the door is unlocking and soon can be opened.
The light 7.3 (End) illuminates at the end of the washing cycle.
First use
• Ensure that the electrical and water connections comply with the installation instructions.
•Remove the polystyrene block and any material from the drum.
•Pour 2 liters of water into the main wash compartment 
of the detergent drawer in order to activate the
Daily use
ECO valve. Then run a cotton cycle at the highest temperature without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the main wash compartment and start the machine.
Load the laundry |
Measure out the detergent and the fabric softener |
Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
6
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the
main wash compartment
or in the appropriate compartment if the selected programme/option it requires (see more details in "Detergent dispenser drawer").
If required, pour fabric softener into the compartment marked 
(the amount used must not exceed the «MAX» mark in the drawer). Close the drawer gently.
Select the required programme by turning the programme selector dial (1)
Turn the programme selector dial to the required programme. The green pilot light of the button 5 starts to flash.
The selector dial can be turned either clockwise or counterclockwise. Turn to position « Off » to reset programme/ switch the machine off.
At the end of the programme the selector dial must be turned to position «Off» , to switch the machine off.
Caution! If you turn the programme selector dial to another programme when the machine is working, the red pilot light of button 5 will blink 3 times to indicate
a wrong selection. The machine will not perform the new selected programme.
Select the spin speed, the Night Cycle or the Rinse Hold option by pressing button 2
The washing machine will automatically select the maximum spin value provided for the programme you have chosen. (See "Washing programmes" for the maximum allowed spin speed).
Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a different speed. The relevant light will light up.
Select the available options by pressing buttons 3 and 4
Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before starting the programme.
When these buttons are pressed, the corresponding pilot lights illuminate. When they are pressed again, the pilot lights go out. If an incorrect option is selected, the integrated red pilot light of the button 5 flashes for 3 times.
For the compatibility among the washing programmes and the options see chapter «Washing
Programmes».
Select the Delay Start by pressing button 6
Before you start the programme, if you wish to delay the start, press the button 6 repeatedly, to select the desired delay. The relevant light illuminates.
You must select this option after you have set the programme and before you start the programme.
You can cancel or modify the delay time at any moment, before you press button 5 .
Selecting the delayed start:
1.Select the programme and the required options.
2.Select the delay start by pressing the button 6 .
3.Press button 5 :
–the machine starts its hourly countdown.
–The programme will start after the selected delay has expired.
Cancelling the delayed start after having started the programme:
1.Set the washing machine to PAUSE by pressing button 5 .
2.Press button 6 once, the light relevant to the selected delay goes off
3.Press button 5 again to start the programme.
The Delay Start can not be selected with DRAIN programme.
Important! The selected delay can be changed only after selecting the washing programme again.
The door will be locked throughout the delay time. If you need to open the door, you must set the machine to PAUSE (by pressing the button 5 ) and then wait a few minutes. After you have closed the door, press the button 5 again.
Start the programme by pressing button 5
To start the selected programme, press the button 5 , the corresponding green pilot light stops blinking. The pilot light corresponding to the running phase illuminates. The appliance starts operating and the door is locked.
To interrupt a programme which is running, press the button 5 : the corresponding green pilot light starts blinking.
To restart the programme from the point at which it was interrupted, press the button 5 again . If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, the red pilot light of the button 5 blinks 3 times.
7
Altering an option or a running programme
It is possible to change some options before the programme carries them out.
Before you make any change, you must PAUSE the appliance by pressing the button 5 .
Changing a running programme is possible only by resetting it. Turn the programme selector dial to Off and then to the new programme position. Start the new programme by pressing the button 5 again. The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 5 to interrupt a programme which is running, the corresponding green pilot light starts blinking.
Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to Off position to cancel a programme which is running. Now you can select a new programme.
Opening the door
After the programme has started the door is locked. If, for any reason, you need to open it, set firstly the machine to PAUSE by pressing the button 5 . After a few minutes the pilot light 7.2 goes off and the door can be opened.
If the door remains locked, this means that the machine is already heating or that the water level is too high. In any case, do not try to force the door!
If you cannot open the door but you need to open it you have to switch the machine off by turning the selector dial to Off position. After a few minutes the door can be opened (pay attention to the water level and temperature!) .
After closing the door, it is necessary to select the programme and options again and to press button 5 .
At the end of the programme
The machine stops automatically. The pilot light of button 5 goes off and after a few minutes the 7.2 pilot light goes off. The light 7.3 illuminates. The door can be opened.
If a programme or an option that ends with water left in the tub has been selected, the light 7.2 illuminates and the door remains locked to indicate that the water must be emptied out before opening the door.
Follow the below instructions to empty out the water:
1.Turn the programme selector dial to Off .
2.Select the draining or spinning programme.
3.Reduce the spin speed if needed, by pressing the relevant button.
4.Press button 5 .
At the end of the programme, the door can be now opened. Turn the programme selector dial to Off to switch the machine off.
Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
Helpful hints and tips
Sorting out the laundry
Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens.
Before loading the laundry
Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash.
New coloured items may run in the first wash; they should therefore be washed separately the first time.
Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or detergent paste.
Treat curtains with special care. Remove hooks or tie them up in a bag or net.
Removing stains
Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing.
Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth.
8
Loading...