6
Electric All-Purpose Sharpener SEAS 60 A1
Electric All-Purpose Sharpener
Operating instructions
KOMPERNASS GMBH
BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: SEAS 60 A1-06/10-V3
SEAS 60 A1
1
2
3
4
5
Index
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Information for these operating instructions . . . . . . . . . . . . . . . . . 2
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limited liability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operating components . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting up and connecting to the power supply . . . . . 8
Items supplied and transport inspection . . . . . . . . . . . . . . . . . . . . 8
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Sharpening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Knife with a smooth edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Scissor edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Flat-head screwdriver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Maintenance and Storage . . . . . . . . . . . . . . . . . . . . . 13
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
GB
IE
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Warranty and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Importer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SEAS 60 A1
1
Introduction
GB
IE
Information for these operating instructions
These operating instructions are a component of the Electric AllPurpose Sharpener SEAS 60 A1 (henceforth designated as the
appliance) and they supply you with important information for the
intended use, safety and connection as well as operation of the
appliance. These operating instructions must constantly be kept
available close to the appliance. They are to be read and applied
by everyone assigned to operate and/or eliminate faults in the
appliance. Retain these operating instructions and hand them over
with the appliance to any future owners.
Copyright
This documentation is copyright protected.
All reproductions or duplications, also as extracts, as well as
representations of the illustrations, even in an altered state, are
only permitted with the approval of the manufacturer.
Intended use
This product is intended for use in a private household, for the
sharpening of straight edge knives and scissors with smooth
straight blades. Further, it is designed to grind smooth the blade
of fl at-head screwdrivers. This product is intended for neither the
sharpening of nail scissors with curved blades not for commercial
or industrial applications.
2
SEAS 60 A1
Limited liability
All technical information, data and information for the connection
and operation contained in these operating instructions correspond
to the latest at the time of printing and, to the best of our knowledge,
take into account our previous experience and know-how. No
claims can be derived from the details, illustrations and descriptions
in these instructions. The manufacturer assumes no responsibility for
damage caused by failure to observe the instructions, improper use,
inappropriate repairs, making unauthorized changes or for using
unapproved replacement parts.
Safety instructions
In these specifi c operation instructions the following warning
notices are used:
DANGER
A warning at this risk level indicates a threateningly
erous situation.
dang
If the dangerous situation is not avoided it can lead to death or
serious injuries.
► Follow the directives given in this warning to avoid the risks of
death or per
sonal injury to people.
GB
IE
SEAS 60 A1
3
GB
IE
WARNING
A warning at this danger level indicates a potentially
dangerous situation.
If the dangerous situation is not avoided it can lead to injuries.
► Follow the directives given in this warning to avoid the risks of
per
sonal injury to people.
IMPORTANT
A warning at this danger level signifi es
property damage.
If the situation is not avoided it can lead to property damage.
► Follow the directives given in this warning to avoid property
damage.
NOTE
► This notice signifi es additional information that assists in the
handling of the appliance.
possible
In this chapter y
regarding the handling of the appliance.
This appliance complies with the statutory safety regulations.
Incorrect usage can, however, lead to personal injury and property
damage.
ou will receive important safety information
4
SEAS 60 A1
DANGER
Risk of potentially fatal electrical shock!
Cont
act with live wires or components may result in
a potentially fatal electrical shock!
Pay heed to the following safety precautions to avoid the risk of
receiving an electric shock:
► Do not use the appliance if it has a damaged plug or power
cable.
► UNDER NO CIRCUMSTANCES should you open the housing
of the appliance. If liv
electrical and mechanical construction is changed, there is a
risk of receiving an electric shock.
For safe handling of the appliance observe the following safety
information:
Before use check the appliance for visible external damage. Do ■
not put into operation a appliance that is damaged or has been
dr
opped. Injury hazard!
This appliance is not intended for use by individuals (including ■
children) with restricted physical, physiological or intellectual
abilities or defi
they are supervised by a person responsible for their safety or
receive from this person instruction in how the appliance is to be
used. Children should be supervised to ensure that they do not
play with the appliance.
ciences in experience and/or knowledge unless
e connections are touched and/or the
GB
IE
SEAS 60 A1
5
GB
IE
Repairs should only be carried out by authorized specialist com- ■
panies or by the customer service department. Incorrect repairs
esult in signifi cant risks for the user. In addition warranty
can r
claims become void.
If the connecting cable of the appliance is damaged, it must be ■
replaced by the manufacturer, his customer service or by a qualifi ed
t
echnician so as to avoid safety risks.
A repair to the appliance during the warranty period may only ■
be carried out by a customer service department authorised by
the manufactur
considered for subsequent damages.
Defective components may only be replaced with original replace- ■
ment parts. Only by using original replacement parts can you
guar
antee that the safety requirements are complied with.
Protect the appliance from moisture and liquid penetration. NEVER ■
submerse the appliance in water or other liquids, locate it in the
immediate vicinit
on it. If water permeates into the interior of the appliance it will be
damaged beyond repair!
Do not operate the appliance in the vicinity of open fl ames (e.g. ■
candles). If you do, the appliance could be damaged beyond
r
epair.
To disconnect from the mains power socket, always pull on the ■
plug, not the power cable. Otherwise, there is a risk that the cable
could be damaged! Risk of electric shock!
Ensure that the plug is at all times easily accessible, so that it can ■
be quickly removed in the event of potential danger or risk.
er otherwise no additional warranty claims can be
y of water or place water-fi lled objects (e.g. vases)
6
SEAS 60 A1
Wear protective gloves to avoid injury from sharp blades. ■
Wear safety goggles to protect your eyes from fl ying abrasive ■
particles or any sparks that may be generated.
A
void direct solar radiation. This could irreparably damage the ■
appliance!
Take steps to ensure that the hair of the head, loose clothing and ■
parts of the body do not come into contact with the revolving
grindstone. Risk of Injur
y!
Operating components
1 Grinder openings for knives with a smooth edge
2 Grinder openings for a fl at-head screwdriver
3 Grinder opening for a scissor edge
4 ON/OFF button
5 Dust drawer
GB
IE
SEAS 60 A1
7
Setting up and connecting to the power
GB
supply
IE
Items supplied and transport inspection
The appliance is delivered with the following components as
standard:
Electric All-Purpose Sharpener ●
Operating instructions ●
Extract the appliance and the operating instructions from the
car
ton and remove all packing materials.
NOTE
► Check the contents to ensure everything is available and for
visible damage.
► If the contents are incomplete, or are damaged due to defective
ackaging or transportation, contact the Service Hotline
p
(see chapter Warranty and Service).
Setup
Unwrap the cable from the cable retainer on the underside of the 1)
appliance.
Guide the power cable through the clamp and the recess on the 2)
side of the case.
Place the appliance on a fi rm, fl at, non-slip and level surface.3)
Insert the plug into a mains power socket. This must be easily 4)
accessible, so that the plug can be quickly removed in the event
of an emergency.
8
SEAS 60 A1
Electrical connection
DANGER
Risk of potentially fatal electrical shock!
Contact with live wires or components may result in
a potentially fatal electrical shock!
Pay heed to the following safety precautions to avoid the risk of
receiving an electric shock:
► Ensure that the power cable is not damaged and that it is not
running o
► Ensure that the power cable is not over-taut or creased/folded.
WARNING
► Do not let the power cable hang over edges. Otherwise, you
could get caught and stumble (trip wir
IMPORTANT
► Before you connect the appliance, compare the connection
data (v
of your electrical power supply. This data must match in order
to avoid damage to the appliance.
ver hot surfaces and/or sharp edges.
e eff ect).
oltage and frequency) on the appliance plate with that
GB
IE
SEAS 60 A1
9
Sharpening
GB
IE
General
Select the appropriate grinder opening for the knife 1) 1/ the
scissors 3/the screwdriver 2. Take note of the images on the
fold-out page.
Always press and hold the On/Off button 2) 4 with your left thumb
(see fold-out page). Thereby, grasp the appliance fi rmly. The
grinding stone rotates continuously until you release the On/
Off button 4.
When the grinding wheel is rotating, follow the steps as described 3)
in the individual chapter for the object being sharpened.
TIPS
► First present the blade when the grindstone is rotating.
► Always draw the knife or scissors back in an even movement
► Do not apply excess pressure and always sharpen only clean
► Always sharpen knives and scissors so that the blade is at an
After sharpening, remove all grinding remnants that may be on the 4)
blade with a moist cloth.
om the blade stop, not in a repetitive back and forth move-
fr
ment – otherwise the result will be an uneven sharpening.
blades, so as to av
stone.
acute angle to the grindstone (as alluded to in the shape of
the opening). Sharpening at the false angle can destroy any
blade.
oid a premature wearing-out of the grind-
10
SEAS 60 A1
Knife with a smooth edge
NOTE
For sharpening a knife, always use both openings for grinding
the knife 1:
In the right grinding opening y
right, in the left grinding opening you hold the blade tilted
slightly to the left.
Hold the knife by its handle with your right hand and smoothly 1)
pull it, from the handle to the blade tip, towards yourself (see foldout page). Thereby, maintain the contour of the knife. Take note
that the pressure applied should not be too fi rm.
Carry through a circular motion from the hilt to the tip of the 2)
blade.
Now repeat the same step on the knife in the other grinder open-3)
ing 1.
Repeat steps 1-3 until the desired sharpness has been achieved.4)
NOTE
If you sharpen a knife with a short blade, only the front end of
the blade is sharpened.
ou hold the blade tilted to the
GB
IE
SEAS 60 A1
11
Scissor edge
GB
IE
Open the scissors out and, with your right hand, draw the fi rst 1)
blade of the scissors, from the grip to the blade tip, through the
grinder opening 3 and towards yourself (see fold-out page).
Proceed the same way with the other blade of the scissors.2)
Repeat steps 1 and 2 until the desired sharpness has been 3)
achieved.
Flat-head screwdriver
Appropriate to its width, insert the screwdriver into one of the two 1)
grinder openings 2 on the front of the appliance (see fold/out
page). Apply only a light pressure.
Pull out the screwdriver out and rotate it through 180° on its longi-2)
tudinal axis. Reinsert it into the appropriate grinder opening 2 and
apply a light pressure. The end face of the screwdriver will now be
ground level and fl at.
Check the result. If necessary, repeat steps 1 and 2.3)
12
SEAS 60 A1
Cleaning
DANGER
Risk of potentially fatal electrical shock!
► Remove the plug from the mains power socket before beginning
w
ith cleaning.
► NEVER submerse the appliance in water or other liquids!
IMPORTANT
Warning in regard to property damage!
► Do not use any aggressive, abrasive or chemical cleaning
agents!
These could damage the upper sur
Clean the surfaces of the appliance with a soft, dry cloth. In the 1)
case of stubborn stains, moisten the cloth and apply a few drops
of mild detergent to the damp cloth.
Pull the dust drawer 2) 5 from the appliance and empty it. Then
wipe it out with a damp cloth.
faces of the appliance.
Maintenance and Storage
The appliance is maintenance-free. No form of maintenance, ■
either on or in the appliance, is intended for execution by the user.
In the event of malfunction or apparent damage, make contact
with our Customer Services.
Wrap the power cable around the cable winder on the underside ■
of the appliance for storage.
Stor
e the appliance at a clean and dry location. ■
GB
IE
SEAS 60 A1
13
Disposal
GB
IE
Do not dispose of this appliance in your normal
domestic waste. This product is subject to the
provisions of European Directive 2002/96/EC.
Dispose of this appliance through an approved disposal centre or
at your community waste facility. Observe the currently applicable
regulations. In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an environmentally
friendly manner.
Appendix
Technical data
Operating voltage 230-240 V / ~ 50 Hz
Power consumption 60 W
Protection class
CO Time 3 Minutes
CO Time
The C.O. Time (Continuous Operation) details how long an appliance may be used without the motor overheating and being
damaged. When the specifi ed C.O. Time has been reached, the
appliance must be switched off until the motor has cooled itself
down to room temperature (ca. 30 minutes).
II
14
SEAS 60 A1
Warranty and Service
You receive a 3-year warranty for this appliance as of the purchase
date. This appliance has been manufactured with care and meticulously examined before delivery.
Please retain your receipt as proof of purchase. In the case of
a warranty claim, please make contact by telephone with our
service department. Only in this way can a post-free despatch for
your goods be assured.
NOTE
► The warranty covers only claims for material and maufacturing
defects, not for tr
to fragile components, e.g. buttons or batteries.
This product is for domestic use only and is not intended for
commercial applications. In the event of misuse and improper
handling, use of force and interference not carried out by our
authorized service branch, the warranty will become void..
Your statutory rights are not restricted in any way by this warranty.
The warranty period is not extended by repairs eff ected under
warranty. This applies also to replaced and repaired parts.
Damages or defects discovered after purchase are to be reported
directly after unpacking, at the latest two days after the purchase
date.
Repairs carried out after lapse of the warranty period are subject
to charge.
ansport damages, worn parts or for damage
GB
IE
SEAS 60 A1
15
GB
IE
DES UK LTD
Tel.: 0871 5000 700
e-mail: support.uk@kompernass.com
Kompernass Service Ireland
Tel: 1850 930 412
Standard call rates apply. Mobile operators may vary.
e-mail: support.ie@kompernass.com
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
(£ 0.10 / minute)
(0,082 EUR/Min.)
16
SEAS 60 A1
Loading...