Loading...
User manual
S27D590C
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
BN46-00438A-04
Table Of Contents
BEFORE USING THE PRODUCT
PREPARATIONS
CONNECTING AND USING A SOURCE DEVICE
7Copyright
7Icons used in this manual
8Cleaning
9Securing the Installation Space
9Precautions for storage
10 Safety Precautions
10Symbols
11Electricity and Safety
12Installation and Safety
14Operation and Safety
18Correct posture to use the product
19Checking the Contents
19 Checking the Components
20 Parts
20Control Panel
21Direct Key guide
22Function Key Guide
24Reverse Side
25 Installation
25Attaching the Stand
26Removing the Stand
27Adjusting the Product Tilt
27Anti-theft Lock
28Installing the Wall Mount
30 Before Connecting
30 Pre-connection Checkpoints
30 Connecting and Using a PC
30 Connecting to a PC
33 Connecting the Power
35Driver Installation
36Setting Optimum Resolution
Table Of Contents |
2 |
|
|
|
|
|
|
|
Table Of Contents
SCREEN SETUP
CONFIGURING TINT
37 Brightness
37 Configuring Brightness
38 Contrast
38 Configuring Contrast
39 Sharpness
39 Configuring Sharpness
40 Game Mode
40 Configuring Game Mode
41 SAMSUNG MAGIC Bright
41 Configuring SAMSUNG MAGIC Bright
43 SAMSUNG MAGIC Upscale
43 Configuring SAMSUNG MAGIC Upscale
44 Image Size
44 Changing the Image Size
46 HDMI Black Level
46 Configuring the HDMI Black Level Settings
47 Response Time
47 Configuring the Response Time
48 H-Position & V-Position
48 |
Configuring H-Position & V-Position |
49 Coarse
49 Adjusting Coarse
50 Fine
50 Adjusting Fine
51 Red
51 Configuring Red
52 Green
52 Configuring Green
Table Of Contents |
3 |
|
|
|
|
|
|
|
Table Of Contents
COORDINATING OSD
SETUP AND RESET
53 Blue
53 Configuring Blue
54 Color Tone
54 Configuring the Color Tone Settings
55 Gamma
55 Configuring Gamma
56 Language
56 Configuring Language
57 Menu H-Position & Menu V-Position
57Configuring Menu H-Position & Menu V- Position
58 Display Time
58 Configuring Display Time
59 Transparency
59 Changing Transparency
60 Reset All
60 Initializing Settings (Reset All)
61 Eco Saving
61 Configuring Eco Saving
62 Off Timer
62Configuring Off Timer
63Configuring Turn Off After
64 PC/AV Mode
64 Configuring PC/AV Mode
65 Key Repeat Time
65 Configuring Key Repeat Time
66 Source Detection
66 Configuring Source Detection
Table Of Contents |
4 |
|
|
|
|
|
|
|
Table Of Contents
INFORMATION MENU AND OTHERS
INSTALLING THE
SOFTWARE
TROUBLESHOOTING GUIDE
SPECIFICATIONS
APPENDIX
67 Power LED On
67 Configuring Power LED On
68 INFORMATION
68 Displaying INFORMATION
69Configuring Brightness and Contrast in the Initial Screen
70Configuring Volume in the Initial Screen
70Volume
71Sound Mode
71 Select Sound
74 Easy Setting Box
74Installing the Software
75Removing the Software
76Requirements Before Contacting Samsung Customer Service Center
76 Testing the Product
76 Checking the Resolution and Frequency
76 Check the following.
79 |
Q & A |
81General
82PowerSaver
83Standard Signal Mode Table
85 Contact SAMSUNG WORLD WIDE
93Responsibility for the Pay Service (Cost to Customers)
93 Not a product defect
93 A Product damage caused by customer's fault
93 Others
Table Of Contents |
5 |
|
|
|
|
|
|
|
Table Of Contents
94 Correct Disposal
94Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
95 Terminology
INDEX
Table Of Contents |
6 |
|
|
|
|
|
|
|
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2014 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual).
(b) you bring the unit to a repair center and there is no defect in the product (i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is carried out.
Icons used in this manual
The following images are for reference only. Real-life situations may differ from what is shown in the images.
Before Using the Product |
7 |
|
|
|
|
|
|
|
Before Using the Product
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1.Power off the monitor and computer.
2.Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
!
Do not spray water or detergent directly on the product.
4.Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cord to the product after cleaning the product. 6. Power on the monitor and computer.
!
Before Using the Product |
8 |
|
|
|
|
|
|
|
Before Using the Product
Securing the Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product.
The exterior may differ depending on the product.
|
3.93 inches |
|
(10 cm) |
|
3.93 inches(10 cm) |
3.93 |
3.93 |
inches |
inches |
(10 cm) |
(10 cm) |
|
3.93 inches(10 cm) |
Precautions for storage
Be sure to contact Samsung Customer Service Center (page 85) if the inside of the monitor needs
cleaning. (A service fee will be charged.)
Before Using the Product |
9 |
|
|
|
|
|
|
|
Before Using the Product
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING
TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
Symbols
|
|
Warning |
A serious or fatal injury may result if instructions are not followed. |
|
|
|
|
|
|
|
|
|
|
Caution |
Personal injury or damage to properties may result if instructions are |
|
|
not followed. |
|
|
|
|
|
|
|
|
|
|
|
|
Activities marked by this symbol are prohibited. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Instructions marked by this symbol must be followed. |
|
|
|
|
Before Using the Product 10
Before Using the Product
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
An electric shock or fire may result.
Do not plug many products into the same power socket.
Otherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
An unstable connection may cause a fire.
!
!
!
Ensure you connect the power plug to a grounded power socket. (type 1 insulated devices only).
An electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord down with a heavy object.
A damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources.
An electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket with a dry cloth.
Otherwise, a fire may result.
Before Using the Product 11
Before Using the Product
Caution
|
Do not unplug the power cord when the product is in use. |
|
The product may become damaged by an electric shock. |
|
Do not use the power cord for products other than authorized products supplied |
|
by Samsung. |
! |
An electric shock or fire may result. |
|
|
|
Keep the power socket where the power cord is connected unobstructed. |
|
If any problem occurs in the product, unplug the power cable to completely |
! |
cut the power to the product. |
|
|
|
Power to the product cannot be completely cut off with the power button. |
|
Hold the plug when disconnecting the power cord from the power socket. |
An electric shock or fire may result.
!
Installation and Safety
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached by children.
! |
Children may suffocate. |
Before Using the Product 12
Before Using the Product
! |
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).
The product may fall and break or cause a personal injury.
Using the product in an area with excess vibration may damage the product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
Otherwise, the product lifespan may be reduced, or a fire may result.
Do not install the product within the reach of young children.
The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a kitchen or near a kitchen counter.
Caution
Take care not to drop the product when moving it.
Otherwise, product failure or personal injury may result.
!
Do not set down the product on its front.
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.
The product may fall and break or cause a personal injury.
Install the product only on cabinets or shelves of the right size.
Before Using the Product 13
Before Using the Product
Put down the product carefully.
The product may fall and break or cause a personal injury.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
Be sure to consult Samsung Customer Service Center (page 85) before installation if you want to install the product at such a place.
Operation and Safety
Warning
!
!
High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.
An electric shock or fire may result.
Contact Samsung Customer Service Center (page 85) for repair.
To move the product, first disconnect all the cables from it, including the power cable.
Otherwise, the power cord may be damaged and a fire or electric shock may result.
If the product generates a strange noise, a burning smell, or smoke, remove the power cord immediately and contact Samsung Customer Service Center (page 85).
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
The product may fall, and your child may become injured or seriously harmed.
If the product falls or the exterior is damaged, power off the product, remove the power cord, and contact Samsung Customer Service Center (page 85).
Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury.
Before Using the Product 14
Before Using the Product
If there is a thunderstorm or lightning strike, turn off the power and disconnect the power cable.
! |
An electric shock or fire may result. |
Do not drop objects on the product or apply impact.
An electric shock or fire may result.
!
!
!
GAS
100
Do not move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.
Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock or fire may result.
Do not use or keep combustible spray or an inflammable substance near the product.
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
Otherwise, a fire may result from an increased internal temperature.
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.
If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 85).
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 85).
Product failure, an electric shock or fire may result.
Before Using the Product 15
Before Using the Product
Caution
-_-
!
!
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver.
Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
Otherwise, a fire may result from accumulated dust, overheating, an electric shock, or electric leakage.
Use the product at the recommended resolution and frequency.
Otherwise,Your eyesight may deteriorate.
Do not put DC power adapters together.
Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
Otherwise, a fire may result.
Do not let water enter the DC power device or get the device wet.
An electric shock or fire may result.
Avoid using the product outdoors where it can be exposed to rain or snow.
Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
!
Looking at the screen too close for an extended period of time can deteriorate your eyesight.
!
Before Using the Product 16
Before Using the Product
Do not hold the monitor upside-down or move it by holding the stand.
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Eye fatigue will be relieved.
!
Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
! |
|
|
Exercise caution when adjusting the product angle or stand height. |
|
Otherwise, children's fingers or hands may become stuck and injured. |
! |
Tilting the product excessively may cause it to fall and result in personal |
|
injury. |
|
Do not place heavy objects on the product. |
|
Product failure or personal injure may result. |
When using headphones or earphones, do not turn the volume too high.
Having the sound too loud may damage your hearing.
Before Using the Product 17
Before Using the Product
Correct posture to use the product
Use the product in the correct posture as follows:
Straighten your back.
Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen.
Keep your eyes directly in front of the screen.
Adjust the angle so light does not reflect on the screen.
Keep your forearms perpendicular to your upper arms and level with the back of your hands.
Keep your elbows at about a right angle.
Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product 18
1Preparations
1.1Checking the Contents
1.1.1 Checking the Components
Contact the dealer from whom you purchased the product if any item is missing.
The appearance of the components and items sold separately may differ from the image shown.
The appearance of actual components may vary from the images below.
Components
Quick Setup Guide |
Warranty card |
User manual |
|
(Not available in some |
|
|
locations) |
|
|
|
|
|
|
|
Regulatory guide |
DC power adapter |
Power cable |
HDMI cable |
Stand base |
Stand neck |
Stereo cable
Items sold separately
DP cable |
D-SUB cable |
HDMI-DVI cable |
1 Preparations 19
1Preparations
1.2Parts
1.2.1 Control Panel
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Function Key Guide
JOG Button
UP
LEFT |
RIGHT |
DOWN
PRESS(ENTER)
Return
Icons |
Description |
|
|
|
Multi directional button that helps navigate. |
JOG Button |
The JOG button is located on the rear left side of the product. |
|
The button can be used to move up, down, left or right, or as Enter. |
Press the JOG button when the screen is turned on. The Function Key Guide will appear. To access the onscreen menu when the guide is
displayed, press the corresponding direction button again.
Function Key Guide
Function Key Guide may vary depending on the function or product
model. Please refer to the actual product.
1 Preparations 20
1Preparations
1.2.2Direct Key guide
For guidance on shortcut keys, the below OSD (On Screen Display) will be displayed if you move the JOG
button in any direction.
HDMI, DisplayPort mode option
Brightness
Volume
Features
Game Mode Off
UP/DOWN: Adjust Brightness, Contrast.
LEFT/RIGHT: Adjust Volume, Sound Mode, Select Sound.
PRESS(ENTER): Display Function Key Guide.
Analog mode option
Brightness
Auto Adjustment
Volume
Features
Game Mode Off
UP: Adjust Brightness, Contrast.
DOWN: Changing the resolution in Display Properties will activate the Auto Adjustment function.
This function is only available in Analog mode.
LEFT/RIGHT: Adjust Volume, Sound Mode, Select Sound.
PRESS(ENTER): Display Function Key Guide.
1 Preparations 21
1Preparations
1.2.3 Function Key Guide
To enter the main menu or to use other items, press the JOG button to display the Function Key Guide.
You can exit by pressing the JOG button again.
Return
UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.
PRESS(ENTER): The selected item will be applied.
Icons |
Description |
|
|
Selects [
] to change the input signal by moving the JOG button in the Function Key Guide screen. A message will appear on the top left corner of the screen if the input signal has been changed.
Selects [
] by moving the JOG button in the function key guide screen.
The OSD (On Screen Display) of your Monitor’s feature appears.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable/Disable: To
lock/unlock the OSD control, press the LEFT button for 10 seconds when the main menu displayed.
If the OSD control is locked,
Brightness and Contrast can be adjusted. Game Mode is available.
INFORMATION can be viewed
1 Preparations 22
1Preparations
Icons |
|
|
Description |
|
||
|
|
|
|
|
|
|
|
|
|
Selects [ |
|
] by moving the JOG button in the function key guide |
|
|
|
|
|
|||
|
|
|
screen. |
|
|
|
|
|
|
Press to enable or disable Game Mode. |
|
||
|
|
|
The items below are not available if the Game Mode function is enable. |
|||
|
|
|
||||
|
|
|
PICTURE Contrast, Sharpness, SAMSUNGBright, SAMSUNGUpscale |
|||
|
|
|
||||
|
|
|
|
|
MAGIC |
MAGIC |
COLOR
SETUP&RESET 
Eco Saving
Selects [
] to turn the Monitor off by moving the JOG button in the function key guide screen.
Actual models because of functional variation, Function key guide options will be different.
Please run the corresponding function based on the actual icon and description.
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below.
JOG Button |
Power saving/Non-signal mode |
|
|
|
|
UP |
Source Change |
|
|
||
Down |
||
|
||
|
|
|
PRESS(ENTER) for 2 seconds |
Power Off |
|
|
|
When the monitor displays the Main menu the JOG Button could be used as below.
JOG Button |
Action |
|
|
|
|
UP/DOWN |
- Move the option |
|
|
|
|
|
- Exit the Main menu. |
|
LEFT |
- Close Sublist without saving value. |
|
|
- Value decreases in the slider. |
|
|
|
|
RIGHT |
- Move to next depth. |
|
- Value increases in the slider. |
||
|
||
|
|
|
ENTER |
- Move to next depth. |
|
- Save the value and close Sublist. |
||
|
||
|
|
1 Preparations 23
1Preparations
1.2.4 Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
AUDIO IN
DP IN
DC 14V
HDMI IN |
RGB IN |
|
Port |
About ports |
|||
|
|
|
|
|
|
|
|
|
Connects to a PC using a DP cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect to a source device using an HDMI cable. |
|
|
|
|
|
|
|
|
|
|
Connect to an audio output device such as headphones.
[AUDIO IN]
Connect to audio input using an audio cable.
Connects to the DC power adapter.
Connect to a PC using the D-SUB cable.
1 Preparations 24
1Preparations
1.3Installation
1.3.1 Attaching the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
Warning: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
Insert the stand neck into the stand base in the direction shown in the figure.
Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
Check that the stand neck is firmly connected.
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in the figure.
Tightly fasten the connecting screw at the bottom of the stand base.
- Caution
Do not hold the product upside down only by the stand.
1 Preparations 25
1Preparations
1.3.2 Removing the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
Warning: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
While holding the upper part of the monitor with one hand, pull the stand neck with the other hand in the arrow direction to detach the stand.
Turn the connecting screw at the bottom of the stand base to separate it.
Remove the stand neck from the stand base by pulling it in the direction of the arrow as shown in the figure.
1 Preparations 26
1Preparations
1.3.3 Adjusting the Product Tilt
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
-2° (±2.0°) ~ 20° (±2.0°)
You can adjust the tilt of your monitor.
Hold the lower part of the product and adjust the tilt carefully.
1.3.4 Anti-theft Lock
An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately.
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
To lock an anti-theft locking device:
1Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2Put one end of the cable through the loop on the other end.
3Insert the locking device into the anti-theft lock slot at the back of the product.
4Lock the locking device.
An anti-theft locking device can be purchased separately.
Refer to the user guide provided with your anti-theft locking device for details. Anti-theft locking devices can be purchased at electronics retailers or online.
1 Preparations 27
1Preparations
1.3.5 Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit allows you to mount the product on the wall.
Purchase a compatible wall-mount kit to use with the product.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe personal injury.
Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. Do not mount the product at more than a 15 degree tilt. Always have two people mount the product on a wall. Standard dimensions for wall mount kits are shown in the table below.
1 Preparations 28
1Preparations
|
|
|
Unit: mm (inches) |
|
|
|
|
|
VESA screw hole |
|
|
Model name |
specs (A * B) in |
Standard Screw |
Quantity |
|
millimeters |
|
|
|
|
|
|
SD590C |
100 X 100 (3.9 x 3.9) |
M4 |
4 |
|
|
|
|
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
1 Preparations 29
2Connecting and Using a Source Device
2.1Before Connecting
2.1.1 Pre-connection Checkpoints
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product.
Check the types of ports at the back of the product you want to connect.
2.2Connecting and Using a PC
2.2.1Connecting to a PC
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Connection Using the D-SUB Cable (Analog Type)
Do not connect the power cable before connecting all other cables. Ensure you connect a source
device first before connecting the power cable.
RGB IN
1Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.
2Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC. (For details, refer to "2.2.2 Connecting the Power".)
3Change the input source to Analog controlling the JOG button UP/DOWN, when input source is not set.
2 Connecting and Using a Source Device 30
Loading...