Model No. 831.294031
Serial No.
Serial
Number
Decal
•Assembly
•Operation
•Maintenance
•Part List and Drawing
CAUTION
Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.
TREADMILL EXERCISER
User’s Manual
Sears, Roebuck and Co., Hoffman Estates, IL 60179
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill.
1.It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
2.Use the treadmill only as described.
3.Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
4.Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near water.
5.Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
6.Keep children under the age of 12 and pets away from the treadmill at all times.
7.The treadmill should be used only by persons weighing 250 pounds or less.
8.Never allow more than one person on the treadmill at a time.
9.Wear appropriate exercise clothes when using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.
10.When connecting the power cord (see page 10), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit. Do not use an extension cord.
11.Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. To purchase a surge suppressor, see your local Sears or call 1-800-366-7278 and order part number 146148.
12.Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed or stop unexpectedly, which may result in a fall and serious injury.
13.Keep the power cord and the surge suppressor away from heated surfaces.
14.Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See BEFORE YOU BEGIN on page 5 if the treadmill is not working properly.)
15.Never start the treadmill while you are standing on the walking belt. Always hold the handrails or upper body arms while using the treadmill.
16.The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.
17.The pulse sensor is not a medical device. Various factors, including your movement, may affect the accuracy of heart rate readings. The sensor is intended only as an exercise aid in determining heart rate trends in general.
18.Never leave the treadmill unattended while it is running. Always remove the key and unplug the power cord when the treadmill is not in use.
19.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 14.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
20.When folding or moving the treadmill, make sure that the storage latch is fully closed.
21.Inspect and properly tighten all parts of the treadmill regularly.
3
22.Never insert any object into any opening.
23.DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an
authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.
24.This treadmill is intended for in-home use only. Do not use this treadmill in a commercial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. Sears assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown have been placed on your treadmill. If a decal is missing, or if it is not legible, please call toll-free 1-800-999-3756 to order a free replacement decal (see the front cover of this manual). Apply the decal in the location shown. Note:
The decals are not shown at actual size.
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORM® CROSSWALK 345s treadmill. The CROSSWALK 345s treadmill combines advanced technology with innovative design to help you get the most from your exercise program in the convenience and privacy of your home. And when you’re not exercising, the unique CROSSWALK 345s treadmill can be folded up, requiring less than half the floor space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after reading this manual, call 1-800-4-MY-HOME® (1-800-469- 4663).To help us assist you, please note the product model number and serial number before calling. The model number of the treadmill is 831.294031. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location).
Before reading further, please review the drawing below and familiarize yourself with the labeled parts.
|
Bookrack |
Water Bottle Holder |
|
(Bottle is not included) |
Console |
|
|
Upper Body Arms |
Key/Clip |
Handrail |
Upright |
|
|
Storage Latch |
|
|
Circuit Breaker |
|
Power Cord |
Walking Belt |
|
Foot Rail |
|
|
RIGHT SIDE |
|
Cushioned Walking Platform |
BACK |
for maximum exercise comfort |
Rear Roller |
|
Adjustment Bolts |
|
|
5 |
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included allen wrenches rubber mallet 
, wire cutters 
and your own phillips screwdriver 
, , and needlenose pliers 
.
For help identifying the assembly hardware, see the drawings below. Note: The assembly hardware and other small parts are packaged in separate part bags. Do not open the part bags until instructed to do so.
If a part is not in the parts bag, first check to see if it has been pre-assembled. If a part is missing, call toll-free
1-800-999-3756.
3/4” Tek Screw (58)–8 |
1” Screw (99)–2 |
3/4” Screw (2)–6 |
1/2” Ground Screw |
|
|
|
(75)–1 |
||
|
|
|
|
|
3/4” Bolt (37)–6 |
1/2” Silver Screw |
|
|
|
|
(48)–1 |
Washer (38)–6 |
Wheel Nut (32)–2 |
|
|
|
|
|
|
|
|
3 1/2” Bolt (64)–2 |
|
|
1. Make sure that the power cord is unplugged.
1
69
With the help of another person, carefully raise the |
62 |
|
|
Uprights (69) to the vertical position. Insert one of the |
63 |
Extension Legs (63) into the treadmill as shown. (Note: It |
|
may be helpful to tip the Uprights as you insert the |
|
Extension Leg.) Make sure that the Warning Decal (62) |
|
is in the position shown. |
|
Insert the other Extension Leg (63) in the same way.
6
2.With the help of another person, carefully lower the Uprights (69) as shown. (Note: It may be helpful to place your foot on one of the Extension Legs [63] as you tip the Uprights.) Make sure that the Extension Legs remain in the Uprights.
Attach each Extension Leg (63) with two 3/4” Tek Screws (58).
Attach four Base Pads (57) with four 3/4” Tek Screws (58) as shown. Note: One replacement Base Pad may be included. If a Base Pad becomes worn and needs to be replaced, use the replacement Base Pad.
With the help of another person, carefully raise the Uprights (69) to the vertical position.
3.Attach the Storage Latch (29) to the left Upright (69) with two 1” Screws (99). Do not overtighten the Screws.
4.Identify the Right Handrail (72), which has a large hole in the left side. Remove any ties from the bracket on the Right Handrail and from the Wire Harness (42). Feed the Wire Harness up into the bracket on the Right Handrail and out of the large hole in the left side. (Note: It may be helpful to use needlenose pliers to pull the Wire Harness out of the large hole.) Press a Handrail Cap (76) onto the lower end of the Right Handrail as shown.
Insert the bracket on the Right Handrail (72) into the top of the Right Upright (69) so that the Handrail Cap (76) is resting against the Right Upright. Attach the Right Handrail and the Handrail Cap with three 3/4” Bolts (37) and three Washers (38) as shown. Firmly tighten the indicated Bolt, but do not tighten the other Bolts yet.
Attach the Left Handrail (not shown) as described above. Note: There is not a wire harness on the left side.
7
2 |
|
|
|
57 |
|
|
|
58 |
|
|
|
58 |
58 |
|
|
|
57 |
|
|
|
|
|
|
57 |
63 |
|
|
|
|
|
|
58 |
|
|
|
|
58 |
|
69 |
|
|
57 |
63 |
|
|
|
|
|
58 |
|
|
3 |
|
|
|
|
29 |
|
|
|
|
99 |
|
|
69 |
|
|
4 |
42 |
|
|
|
Large |
|
|
|
Hole |
|
|
Bracket 
37
38
72
69
37
38
Tighten
38
37 
76
Loading...