Page 1
Basic Hardware buttons
FLASH MEMORY MULTIMEDIA AV
NAVIGATION RECEIVER
Quick Start Guide
This guide is intended to guide you through
the basic functions of this navigation system.
For details, please refer to the operation
manual.
Searching for your destination
by address
1 Display Destination Menu
and touch Address.
2 Input the information that
you want to set as the destination.
Touching the one of options.
After narrowing down your destination, “Location confirmation
screen” will appear.
3 Touch OK.
After searching for the destina-
tion, the “Route confirmation
screen” appears.
4 Touch OK.
This navigation systems gives
you route guidance visually and
by voice.
AVIC-Z110BT
Switching the screen
Published by Pioneer Corporation.
Copyright © 2009 by Pioneer Corporation.
All rights reserved. Printed in Thailand
<KYTZX> <09E00000> <CRB3037-A/N> UC
Navigation Menu
Touch Destination on the Top Menu.
41
6
2 3
1 VOICE button
Enables you to start the voice
operation.
2 VOL (+/–) button
Adjusts the AV (Audio and Video)
source volume.
3 HOME button
Press to display “Top Menu”.
4 MODE button
Press to switch between the
map screen and the AV operation screen.
5 TRK (◄/►) button
6 OPEN CLOSE button
Press to display the control
panel of the LCD panel.
1 Search by address
2 Shortcut key for calculating
the route home
3 Search for stores, restau-
rants, and other businesses
in the points of interest database
4 Searching for POIs by using
the data on external storage
devices (SD)
5 Selecting your stored loca-
tion
6 Returns the previous screen
7 Select a previously routed
destination
8 Searching for a location by
coordinates
9 Canceling your current route
a Viewing the current route
information
b Browsing information on
MSN
®
Direct
Top Menu
("Classic" menu)
Map screen
"AV Source" menu"Destination" menu "Phone" menu
AV screen
5 7 8 a9 b
Top M en u
("Shortcut" menu)
1 2 3 4 5 6
Page 2
Basic items on the map
1
8
7
6
1 Name of the street to be
used (or next guidance
point)
2
Current time
3 Estimated time of arrival (or
distance to the waypoint or
the destination)
4
Current route
5 Current position
6 Street name that your vehi-
7
Changing the map scale and
8
Next direction of travel
2
3
4
5
cle is travelling along
the map orientation.
Scrolling the map
Dragging the map allows
scrolling. The scroll speed will
change depending on your drag
speed.
Setting the volume for navigation
system
Touch the keys in the following order in Top Menu;
Settings
➡ Volume
➡ System Settings
Selecting the AV source
Display "AV Source" menu and touch the key to select your
desired AV source.
The AV source is disabled if the equipment is not connected or
inserted.
Playing files from an SD memory card
You can play an audio and video file on an SD memory card.
(For details about playable files, refer to “Operation Manual”.)
1 Press the OPEN CLOSE
button. The “Monitor
Setup” screen appears.
2 Touch SD Insert.
3 Insert your SD memory
card until it clicks.
4 Press the OPEN CLOSE
button.
5 Touch keys to operate the
music/video source.
1 Playback control
2 Switch to the screen for
video control.
2
1
Pairing your
phone
1 Activate the Bluetooth
function on your phone.
2 Touch the keys in the fol-
lowing order in Top Menu;
Settings ➡ Bluetooth
Settings
3 Turn Bluetooth On/Off to
On.
4 Touch Registration on
Bluetooth Settings.
The system tries to find and
lists nearby devices.
5 Touch your phone on the
list and then enter the PIN
code from your phone.
(1111 is default.)
When the pairing is success-
ful, the message will appear.
Transferring
the phone book
1 Connect the cellular
phone.
2 Touch Contacts Transfer
on Phone Menu.
3 Check that the following
screen is displayed, and
operate your cellular
phone to transfer the
phone book entries.
After transferring the data is
finished, a message asking
whether you want to transfer
more data appears.
4 Touch No.
The transferred data is
imported to the navigation
system.
Playing your Apple iPod
You can control an iPod by connecting the USB interface cable for
iPod (CD-IU50V) (sold separately) to the navigation system.
1 Connect your iPod.
USB
connector
USB interface
cable for iPod
2 Switch the AV source to
iPod.
Music control
1
1
Touch one of the categories
in which you want to search
for a song or Video.
2
Touch to switch between the
video screen and the music
screen.
3
Playback control
2
3
Video control
Touch Video to switch to the
iPod-video screen.
1
3
2
2
Loading...