Pioneer AVIC-F930BT User Manual

Upgrade Instructions and
Operation Manual Addendum

2013 NAVIGATION UPGRADE microSDHC-CARD

CNSD-410FM

This software upgrade will result in changes to certain
features and availability of information. While the
changes are intended to improve the overall user
experience for most users, Pioneer and its licensors
disclaim any warranty or liability for damages in
connection with such changes.

English

2

Engb

Engb

3

4

Engb

Engb

5

6

Engb

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate
your model properly.

Important

The screens shown in the examples may differ
from actual screens, which may be changed
without notice for performance and function
improvements.

Licence agreement

PIONEER CNSD-410FM 8
END USER LICENSE AGREEMENT 10

About the database
About the data for the map database 12

Important Information for the User

Information on compatibility with iPhone

with Lightning connector 13

Precaution

Models to be upgraded 14
Manual overview 14
Conventions used in this manual 14
“microSD card” 15
In case of trouble 15
Visit our website 15
Copyright 15
Changing to the NAVTEQ map database 15

Functions enabled or disabled by
upgrade

Setting items to be deleted and initialised by

upgrade 17

– Upgrading the software programme

and the map database 19

– Checking whether the upgrade was

done properly 20

– Updating the Bluetooth wireless

technology software 20

Using the rear view camera functions

Setting guidelines on the rear view

image 22

Troubleshooting

Problems in the procedures for updating 24
Messages in the procedures for

updating 24

Instructions for upgrading

The navigation system upgrade process 18
Preparation for upgrade 18

– Checking the device number 18
– Getting the password for

authentication 18

Upgrade procedures 19

Engb

7

Chapter

01

Licence agreement

PIONEER CNSD-410FM

THIS IS A LEGAL AGREEMENT BETWEEN
YOU, AS THE END USER, AND PIONEER
CORP. (JAPAN) (“PIONEER”). PLEASE READ
THE TERMS AND CONDITIONS OF THIS
AGREEMENT CAREFULLY BEFORE USING
THE SOFTWARE INSTALLED ON THE
PIONEER PRODUCTS. BY USING THE SOFT­WARE INSTALLED ON THE PIONEER PRO­DUCTS, YOU AGREE TO BE BOUND BY THE
TERMS OF THIS AGREEMENT. THE SOFT­WARE INCLUDES A DATABASE LICENCED BY
THIRD PARTY SUPPLIER(S) (“SUPPLIERS”),
AND YOUR USE OF THE DATABASE IS COV­ERED BY THE SUPPLIERS’ SEPARATE
TERMS, WHICH ARE ATTACHED TO THIS
AGREEMENT (refer to page 10). IF YOU DO
NOT AGREE WITH ALL OF THESE TERMS,
PLEASE RETURN THE PIONEER PRODUCTS
(INCLUDING THE SOFTWARE, AND ANY
WRITTEN MATERIALS) WITHIN FIVE (5) DAYS
OF RECEIPT OF THE PRODUCTS, TO THE
AUTHORISED PIONEER DEALER FROM
WHICH YOU PURCHASED THEM.

1 GRANT OF LICENCE

Pioneer grants to you a non-transferable, non­exclusive licence to use the software installed
on the Pioneer products (the “Software”) and
the related documentation solely for your own
personal use or for internal use by your busi­ness, only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the
Software. You shall not loan, rent, disclose,
publish, sell, assign, lease, sublicence, market
or otherwise transfer the Software or use it in
any manner not expressly authorised by this
agreement. You shall not derive or attempt to
derive the source code or structure of all or
any portion of the Software by reverse engi­neering, disassembly, decompilation, or any
other means. You shall not use the Software to
operate a service bureau or for any other use
involving the processing of data for other per­sons or entities.

Pioneer and its licensor(s) shall retain all copy­right, trade secret, patent and other proprie­tary ownership rights in the Software. The
Software is copyrighted and may not be cop­ied, even if modified or merged with other pro­ducts. You shall not alter or remove any
copyright notice or proprietary legend con­tained in or on the Software.
You may transfer all of your licence rights in
the Software, the related documentation and a
copy of this Licence Agreement to another
party, provided that the party reads and agrees
to accept the terms and conditions of this Li­cence Agreement.

2 DISCLAIMER OF WARRANTY

The Software and related documentation are
provided to you “AS IS”. PIONEER AND ITS LI­CENSOR(S) (for the purpose of provisions 2
and 3, Pioneer and its licensor(s) shall be col­lectively referred to as “Pioneer”) MAKES AND
YOU RECEIVE NO WARRANTY, WHETHER EX­PRESS OR IMPLIED, AND ALL WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
ANY PARTICULAR PURPOSE ARE EX­PRESSLY EXCLUDED. SOME COUNTRIES DO
NOT ALLOW EXCLUSION OF IMPLIED WAR­RANTIES, SO THE ABOVE EXCLUSION MAY
NOT APPLY TO YOU. The Software is complex
and may contain some nonconformities, de­fects or errors. Pioneer does not warrant that
the Software will meet your needs or expecta­tions, that operation of the Software will be
error free or uninterrupted, or that all noncon­formities can or will be corrected. Further­more, Pioneer does not make any
representations or warranties regarding the
use or results of the use of the Software in
terms of its accuracy, reliability or otherwise.

8

Engb

Licence agreement

Chapter

01

3 LIMITATION OF LIABILITY

IN NO EVENT SHALL PIONEER BE LIABLE
FOR ANY DAMAGES, CLAIM OR LOSS IN­CURRED BY YOU (INCLUDING, WITHOUT LIM­ITATION, COMPENSATORY, INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL, OR
EXEMPLARY DAMAGES, LOST PROFITS, LOST
SALES OR BUSINESS, EXPENDITURES, IN­VESTMENTS, OR COMMITMENTS IN CON­NECTION WITH ANY BUSINESS, LOSS OF
ANY GOODWILL, OR DAMAGES) RESULTING
FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF
SUCH DAMAGES. THIS LIMITATION APPLIES
TO ALL CAUSES OF ACTION IN THE AGGRE­GATE, INCLUDING WITHOUT LIMITATION
BREACH OF CONTRACT, BREACH OF WAR­RANTY, NEGLIGENCE, STRICT LIABILITY, MIS­REPRESENTATION, AND OTHER TORTS. IF
PIONEER’S WARRANTY DISCLAIMER OR
LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE
OR INAPPLICABLE, YOU AGREE THAT
PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50 %) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRO­DUCT.
Some countries do not allow the exclusion or
limitation of incidental or consequential da­mages, so the above limitation or exclusion
may not apply to you. This warranty disclaimer
and limitation of liability shall not be applic­able to the extent that any provision of this
warranty is prohibited by any country or local
law which cannot be pre-empted.

laws and regulations of the Government. If the
Software has been rightfully obtained by you
outside of the Country, you agree that you will
not re-export the Software nor any other tech­nical data received from Pioneer, nor the di­rect product thereof, except as permitted by
the laws and regulations of the Government
and the laws and regulations of the jurisdic­tion in which you obtained the Software.

5 TERMINATION

This Agreement is effective until terminated.
You may terminate it at any time by destroying
the Software. The Agreement also will termi­nate if you do not comply with any terms or
conditions of this Agreement. Upon such ter­mination, you agree to destroy the Software.

6 MISCELLANEOUS

This is the entire Agreement between Pioneer
and you regarding its subject matter. No
change in this Agreement shall be effective
unless agreed to in writing by Pioneer. If any
provision of this Agreement is declared invalid
or unenforceable, the remaining provisions of
this Agreement shall remain in full force and
effect.

Licence agreement

4 EXPORT LAW ASSURANCES

You agree and certify that neither the Software
nor any other technical data received from
Pioneer, nor the direct product thereof, will be
exported outside the country or district (the
“Country”) governed by the government having
jurisdiction over you (the “Government”) ex­cept as authorised and as permitted by the

Engb

9

Chapter

01

Licence agreement

END USER LICENSE AGREEMENT

10

Engb

Licence agreement

Chapter

01

Licence agreement

Engb

11

Chapter

02

About the database

About the data for the map
database

! Modifications related to roads, streets/high-

ways, terrain, construction and other things
before/during the development period may
not be reflected in this database. Inevitably,
those modifications after that period are
not reflected in this database.

! Regardless of existing and newly-built

things, the data may be different from the
actual condition.

! For details about the map coverage of this

navigation system, refer to the information
on our website.

! It is strictly prohibited to reproduce and use

any part or the whole of this map in any
form without permission from the copyright
owner.

! If the local traffic regulations or conditions

deviate from this data, follow the local traf­fic regulations (such as signs, indications,
etc.) and conditions (such as construction,
weather, etc.).

! The traffic regulation data used in the map

database applies only to standard sized
passenger vehicles. Note that regulations
for larger vehicles, motorbikes, and other
non-standard vehicles are not included in
the database.

! © 2005-2012 NAVTEQ. All rights reserved.

NAVTEQ Maps is a trademark of NAVTEQ.

! © EuroGeographics

12

Engb

Important Information for the User

Chapter

03

NEVER stop the engine of your vehicle or turn
off the power supply to the navigation system
until the installation is completed. Turning the
power off during upgrade process causes a
malfunction or failure of the navigation sys­tem.

Information on
compatibility with iPhone
with Lightning connector

p The following descriptions apply to the fol-

lowing models.
AVIC-F940BT, AVIC-F8430BT

p In this manual, iPhone 5 and iPod touch

(5th generation) will be referred to as
“iPhone with Lightning connector”.

p Note that this product does not contain

“Firmware update for iPhone 5 / iPod touch
(5th generation) AppRadio Mode compat-

ibility”.
To use iPhone with Lightning connector, be
sure to apply the update in addition to com­pleting the sof tware upgrade with this pro­duct.
See the following website to download “Firm­ware update for iPhone 5 / iPod touch (5th
generation) AppRadio Mode compatibility”
dedicated to this product.

http://www.pioneer-rus.ru/

= For your reference to update, see update in-

struction manual on the website.
p The update is only allowed for the following

models.

AVIC-F940BT, AVIC-F8430BT
p The following cables are required for con-

nection to this navigation system.

! VGA/USB interface cable for iPod /

iPhone (CD-IV202NAVI) (sold separately)

! Lightning to VGA Adapter (Apple Inc.

products) (sold separately)

! Lightning to USB cable (CD-IU52) (sold

separately) or Lightning to USB cable

(supplied with iPhone with Lightning
connector)

Notes:

! If you have already applied the update using

“Firmware update for iPhone 5 / iPod touch
(5th generation) AppRadio Mode compatibil­ity” and then you complete the software up­grade with this product, the AppRadio Mode
(previously known as Advanced App Mode)
function will be disabled. In this case, go to
the website and reapply the update by down­loading “Firmware update for iPhone 5 / iPod
touch (5th generation) AppRadio Mode com­patibility” dedicated to this product.

! Be sure to complete the software upgrade

with this product, and then apply the update
by downloading “Firmware update for iPhone
5 / iPod touch (5th generation) AppRadio
Mode compatibility” dedicated to this product,
otherwise problems may occur.

! iPod source is unavailable when an iPhone

with Lightning connector is connected to this
navigation system.

! If you use only the hands-free function of

iPhone 5, there is no need to apply the update
by downloading “Firmware update for iPhone
5 / iPod touch (5th generation) AppRadio
Mode compatibility”.

Important Information for the User

Engb

13

Chapter

04

Precaution

! Read the entire manual before upgrading

the programme of your navigation system.

! This package is unique, and cannot be in-

stalled on more than one unit.

! Web-connected computer is required for

online issuance of password.

Models to be upgraded

This product can upgrade the software pro­gramme and database of the following mod­els:

! AVIC-F930BT
! AVIC-F940BT
! AVIC-F8430BT
! CNSD-310FM

p In this manual, CNSD-310FM indicates the

navigation system that is upgraded using
the software upgrade CNSD-310FM.

Manual overview

This manual describes how to get the pass­word and activate the upgrade. It also provides
an overview of how functions change after the
upgrade.
p The screen examples shown in this manual

are based on the upgraded version of AVIC­F930BT using this product. The screens
may vary according to the models.

By upgrading AVIC-F930BT with this product,
functions and operations will be nearly equiva­lent to AVIC-F940BT. Therefore, obtain Opera­tion Manual for AVIC-F940BT and use it as your
primary reference.

http://www.pioneer.eu

Conventions used in this
manual

Before moving on, take a few minutes to read
the following information about the conven­tions used in this manual. Familiarity with
these conventions will help you greatly as you
learn how to use your new equipment.
! Buttons on your navigation system are de-

scribed in ALL CAPITALS, BOLD letter­ing:
e.g.)
Press the MODE button or the HOME but­ton.

! Menu items, screen titles, and functional

components are described in bold with
double quotation marks “”:
e.g.)
The “System Settings” screen appears.

! Touch panel keys that are available on the

screen are described in bold in brackets [ ]:
e.g.)
Touch [Settings].

! Extra information, alternatives and other

notes are presented in the following for­mat:
e.g.)
p If the home location has not been stored

yet, set the location first.

! Functions of other keys on the same screen

are indicated with # at the beginning of the
description:
e.g.)

# If you touch [OK], the entry is deleted.

! References are indicated like this:

e.g.)
= For details of the operation, refer to

Checking the device number on page

18.

14

Engb

Precaution

Chapter

04

“microSD card”

The microSD card and microSDHC card are
collectively referred to as the “microSD card”.
p Keep the microSD card out of the reach of

small children to prevent them from acci-

dentally swallowing it.
p Do not store the microSD card in high tem-

peratures or direct sunlight.
p Do not subject the microSD card to shock

or impact.
p Do not allow the microSD card to come

into contact with liquids. Damage to the

microSD card and your products could re-

sult from contact with liquids.
p Be careful not to touch terminals on the

microSD card. Doing so may cause con-

nection failures. If any terminals are dirty,

wipe them with a clean dry cloth.

p microSDHC Logo is a trademark of SD-3C,

LLC.

In case of trouble

! Should the navigation system fail to oper-

ate properly, contact your dealer or nearest

authorised Pioneer Service Station.
! Do not lose the supplied Media Number

Card (MEDIA NUMBER CARD). If the

Media Number Card is lost, reissue of the

Media Number (MEDIA NUMBER) is not

possible. Also you must submit the Media

Number Card when repairs are needed.

The card is necessary as proof of authenti-

city if service is required (including re-

covery).

Visit our website

Visit us at the following site:

http://www.pioneer.eu

! Register your product. We will keep the de-

tails of your purchase on file to help you
refer to this information in the event of an
insurance claim such as loss or theft.

! We offer the latest information about

PIONEER CORPORATION on our
website.

Copyright

The names of private corporations, pro­ducts and other entities described in this
product are the registered trademarks or
trademarks of their respective firms.

= For more information, refer to the Operation

Manual of your navigation system.

Changing to the NAVTEQ
map database

p The following descriptions are for users up-

grading AVIC-F930BT for the first time.
! The map design will be changed by up-

grading.

! The display of roads, street names, the

background texture of the map, and POI
categories will change depending on lo­cations or the map scale after up­grading.

Precaution

Engb

15

Chapter

05

Functions enabled or disabled by upgrade

If you upgrade your navigation system using this product, the system will have the following changes.

Grouping:
1: AVIC-F930BT
2: AVIC-F940BT or CNSD -310FM

p On AVIC-F8430BT, only the map database is updated.

1: Functions and operations changed by upgrade

Navigation func­tions

Destination

Bluetooth Settings

Rear view camera

Other functions

AV functions Summary of changes

iPod

Summary of changes

You can search the cities from the history that you have searched by
entering the name with the keyboard and selected by “Address”,
“POI” or “Favourites”.

If you touch [OK] without entering the house number, a representa­tive location on the road in the selected city appears.

You can sort search results of POI names by degree of consistency
with the entered text.

Facility’s address will appear on the “POI List” screen. 1 —

You can switch the order of names (first/last name) in the phone
book.

The Bluetooth firmware version will be updated. 11

Guidelines are displayed on the rear view image.
p The positioning of guidelines can be adjusted.

= For details of the operation, refer to Using the rear view cam-

era functions on page 22.

After you start using this navigation system, a message related to
map data may be displayed.

If you do not operate this navigation system for two minutes, demon­stration images are displayed.

Your navigation system can be switched to AppRadio Mode (pre­viously known as Advanced App Mode), allowing you to display
and operate iPod applications on the screen.
In AppRadio Mode (previously known as Advanced App Mode),
you can operate applications through the navigation system using
finger gestures, such as tapping, dragging, scrolling or flicking the
screen.

The keyboard language preference for iPhone application screens
can be set on the iPod function menu screen.

Grouping

12

1 —

1 —

1 —

1 —

11

1 —

1 —

Grouping

12

1 —

1 —

16

Engb

Functions enabled or disabled by upgrade

Setting items to be deleted
and initialised by upgrade

The following data and settings will be cleared
and reset to default values. Other items will be
retained. However, some items are not listed
because the setting can be easily recovered by
users, such as the last cursor position on the
map screen.
Bold indicates functions or command names.

Setting Items

Top Menu Shortcut Menu

Current route

Route setting

Destination “Favourites” list sort order

Map Settings

Navi Settings

System Set­tings

Bluetooth Set­tings

Others Keyboard layout

Guidance state of the current route

Route Options

Learning route data

Displayed Info

Quick Access Selection

Overlay POI

Day/Night Display

AV Guide Mode

Road Colour

Drive Log Settings

Demo Mode

Eco Settings

Regional Settings

Volume

Auto Answer Preference

Refuse All Calls

Chapter

05

Functions enabled or disabled by upgrade

The user data stored in the internal memory of
the unit may be erased if an unexpected error
occurs during software installation. Pioneer is
not responsible for any data loss or unavailabil­ity of user data.

Engb

17

Chapter

06

Instructions for upgrading

The navigation system
upgrade process

1 Check the device number of your naviga-

tion system.
= For details of the operation, refer to

Checking the device number on page 18.

j

2 Get the password for authentication.

= For details, refer to Getting the password

for authentication on page 18.

j

3 Upgrade the software programme of your

navigation system.

= For details of the operation, refer to Up-

grading the software programme and the
map database on page 19.

j

4 Check whether the upgrade was done prop-

erly.
= For details of the operation, refer to

Checking whether the upgrade was done
properly on page 20.

j

5 Update the Bluetooth firmware.

= For details of the operation, refer to Up-

dating the Bluetooth wireless technology
software on page 20.

Preparation for upgrade

Checking the device number

First, check your device number
(DEVICE NUMBER, displayed such as
Device # or Device Number) of your naviga­tion system for later procedures. To display the
device number, do the following.

1 Press the HOME button to display the
“Top Menu” screen.

2 Touch [Settings].
The “Settings Menu” screen appears.

3 Touch [System Settings].
The “System Settings” screen appears.

4 Touch [Service Information].

The “Service Information Screen” screen ap­pears.

5 Write down your device number
(Device Number) onto the supplied Media
Number Card (MEDIA NUMBER CARD) to
avoid mistakes.

p Also write down “Version” information

which would be used to confirm completion
of the update.

Getting the password for
authentication

For upgrade, a unique password issued online
is necessary. Access the website with your
computer and get your password.
The following information is required.
! Media Number (MEDIA NUMBER) printed

on supplied Media Number Card
(MEDIA NUMBER CARD)

! Device Number (DEVICE NUMBER) of your

navigation system

18

1 Access on the following website to
issue your password.

http://www.pioneer-rus.ru/UnlockNavgate

For issuing the password, follow the instruc­tion on the website.

Engb

Instructions for upgrading

Chapter

06

2 Record the password that you received.

You need to input this password accurately.
Write down your password to avoid mis­takes.

Upgrade procedures

! NEVER stop the engine of your vehicle or

turn off the power supply to the navigation
system until the installation is completed.
Turning the power off during upgrade pro­cess causes a malfunction or failure of the
navigation system.

! No functions are available during upgrade

process.

! To use iPhone with Lightning connector,

first go to the website and download “Firm­ware update for iPhone 5 / iPod touch (5th
generation) AppRadio Mode compatibility”.
Next, be sure to upgrade the software pro­gramme and the map database with this
product and then apply the update with
“Firmware update for iPhone 5 / iPod touch
(5th generation) AppRadio Mode compat­ibility”.

= For details, refer to Information on com-

patibility with iPhone with Lightning con­nector on page 13.

3 Touch [Yes].

The message confirming whether or not to
enter the password will appear.

4 Touch [Yes].

After a short pause, the keyboard for entering
the password will appear.

# If you touch [No], the device number
(Device #) of your navigation system will appear.
# If you touch [Cancel], the update will be can-
celled.

5 Enter the password for authentication
that you obtained, then touch [OK].

Instructions for upgrading

Upgrading the software
programme and the map database

This section describes the upgrade proce­dures for your navigation system.
p The upgrade takes approximately 25 min-

utes in total.

1 Park your vehicle in a safe place and
apply the handbrake.

2 Insert the upgrade microSD card into
the SD card slot.

The message confirming whether or not to
start the update will appear.

A message confirming whether to restart the
navigation system appears.

6 Touch [OK].

The navigation system restarts and then the in­stallation begins.

Engb

19

Chapter

06

Instructions for upgrading

7 Wait until the upgrade process is com­plete.

After the installation is complete, the naviga­tion system restarts.

Checking whether the upgrade
was done properly

Display “Service Information Screen” screen
to compare the current version number with
the previous one.

1 Press the HOME button to display the
“Top Menu” screen.

2 Touch [Settings].
The “Settings Menu” screen appears.

3 Touch [System Settings].
The “System Settings” screen appears.

4 Touch [Service Information].

The “Service Information Screen” screen ap­pears.

5 Check the version information.

6 Eject the upgrade microSD card.

Updating the Bluetooth
wireless technology software

Access the Pioneer website to check your
phone’s compatibility. If your phone is on the
list and you wish to update, manually update
the Bluetooth firmware after the automatic up­grade is finished.

http://www.pioneer.eu

CAUTION

! Be sure to upgrade your navigation system

first.

! Be careful to follow the update procedure cor-

rectly. If you make a mistake, Bluetooth wire­less technology functions will become
unavailable.
p Consult your authorised dealer if you are

unable to use Bluetooth wireless technol­ogy functions.

! Be sure to complete the Bluetooth firmware

update procedure without interruption.

p Registered phones that are listed on the

“Connection List” screen are cleared by
the software update.

1 Insert the upgrade microSD card into
the SD card slot.

2 Press the HOME button to display the
“Top Menu” screen.

3 Touch [Settings].
The “Settings Menu” screen appears.

4 Touch [Bluetooth Settings].
The “Bluetooth Settings” screen appears.

5 Touch [Firmware update].

The current version is displayed.

6 Confirm the Bluetooth firmware ver­sion.

Make sure that the current version is 3.22 or
later.

20

Engb

Instructions for upgrading

7 If the current version is 3.22 or later,
touch [Firmware update].

The message confirming whether or not to
start the update will appear.

8 Make sure that the current Bluetooth
firmware version is 3.22 or later and the
new Bluetooth firmware version is 3.32.

Chapter

06

Instructions for upgrading

9 Touch [Yes].

Update starts.

10 Wait until the upgrade process is com­plete.

A message will appear after the update is
complete.

11 Touch [OK].

The message disappears, and the map screen
returns.

12 Eject the upgrade microSD card.

Update is completed.

Engb

21

Chapter

07

Using the rear view camera functions

p The instructions in this section apply to

every model except AVIC-F8430BT.

Setting guidelines on the
rear view image

CAUTION

! When adjusting the guidelines, be sure to

park the vehicle in a safe place and apply the
handbrake.

! Before getting out of the car to place the

markings, be sure to turn the ignition switch
off (ACC OFF).

! The range projected by the rear view camera

is limited. Also, the vehicle width and distance
guidelines displayed on the rear view camera
image may differ from the actual vehicle
width and distance. (The guidelines are
straight lines.)

! The image quality may deteriorate depending

on the usage environment, such as at night or
in dark surroundings.

1 Park your vehicle in a safe place and
apply the handbrake.

2 Using packing tape or similar, place
markings approximately 25 cm from each
side of the vehicle, and approximately
50 cm and 2 m from the rear bumper.

2m

50cm

25cm

Markings

3 Put the gearstick in reverse and display
the rear view camera screen.

4 Touch .

The screen for setting the guidelines appears.

# Each touch of turns the guidelines dis-
play on or off.

5 Touch or .

The screen for adjusting the points appears.

# If you touch [Clear], the display position of the
guidelines returns to the factory settings.

6 Touch or to select a point.

22

Engb

Markings

Rear bumper

25cm

7 Touch , , or to adjust
the position of the point.

p When a point is moved, the distance from

the initial value is displayed at the top right
of the screen.

Using the rear view camera functions

8 Touch [OK].

The set value is saved and the rear view image
appears.

# If you touch [Clear], the point returns to the
preadjustment position.
# If you touch
ting screen for guidelines without reflecting the
setting.

, the display returns to the set-

Chapter

07

Using the rear view camera functions

Engb

23

Appendix

Troubleshooting

Problems in the procedures for updating

Symptom Cause Action

The upgrade process doesn’t
start and the navigation system
boots up as usual.

The navigation system does not
work properly after upgrade.

An incorrect microSD card has
been inserted.

Upgrade has been already done. Check whether the upgrade was done prop-

The screen that cannot begin the
upgrade process is displayed.

The engine of your vehicle was
stopped or the power supply to the
navigation system was turned off
during upgrade process.

Upgrade microSD card was pulled
out during upgrade process.

Eject the inserted microSD card and insert
the correct upgrade microSD card.

erly. If the upgrade has not been done yet,
consult the nearest authorised ser vice sta­tion.

Eject the upgrade microSD card, and display
the map of your current position, and then re­insert the upgrade microSD card.

Consult the nearest authorised ser vice sta­tion.

Consult the nearest authorised ser vice sta­tion.

Messages in the procedures for updating

The following messages may be displayed by your navigation system. Refer to the table to identify
the problem, then take the suggested corrective action.
There are occasions when you may see error messages other than those shown here. In such
cases, follow the instructions given on the display.

Message When What to do

An error occurred and the up­date failed.

24

Engb

Unexpected error occurred in the
update process.

Consult your local Pioneer dealer if this mes­sage persist.

Engb

25

26

Engb

Engb

27

To keep up to date with the latest navigational data,

you can periodically update your navigation system.

For further details, please visit our website.

PIONEER CORPORATION

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: [phone]

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: [phone]

<KYTZ13E>

© 2013 PIONEER CORPORATION.
All rights reserved.

<CRB4243-A> UW