Register your product and get support at
www.philips.com/welcome
32PFL5605/98
40PFL5605/98
46PFL5605/98
32PFL5605S/98
40PFL5605S/98
46PFL5605S/98
EN User manual
EN |
Addendum |
|
You cannot play mp4 video files |
|
that use the H.264 or AVC codec. |
FR |
Addenda |
|
La lecture de fichiers vidéo MP4 |
|
utilisant le codec H.264 ou AVC |
|
n’est pas prise en charge. |
TH |
|
|
MP4 |
|
H.264 AVC |
VI |
Phụ lục |
|
Bạn không thể phát các tập tin |
|
video MP4 sử dụng bộ giải mã |
|
AVC hoặc H.264. |
ZH-CN |
|
|
H.264 |
|
AVC MP4 |
|
|
ZH-HK |
|
|
H.264 |
|
AVC MP4 |
Contents
1 |
Notice |
2 |
|
|
|
2 |
Important |
3 |
|
|
|
3 |
Your TV |
5 |
|
Side controls and indicators |
5 |
|
Remote control |
5 |
|
|
|
4 |
Use your TV |
|
|
|
|
|
|
|
|
|
|
|
Adjust TV volume |
9 |
|
Use teletext |
9 |
|
|
|
5 |
Use more of your TV |
10 |
|
Access TV menus |
10 |
|
Change picture and sound settings |
10 |
|
Use advanced teletext features |
13 |
|
Create and use lists of favourite channels 14 |
|
|
Use timers |
15 |
|
Use child control |
15 |
|
Use the TV clock |
16 |
|
View photos, play music and watch video |
|
|
from a USB storage device |
16 |
|
Use Scenea to display a picture asTV |
|
|
|
|
|
Update theTV software |
19 |
|
ChangeTV preferences |
19 |
|
Start a TV demo |
20 |
|
Reset theTV to factory settings |
20 |
|
|
|
6 |
Install channels |
21 |
|
Automatically install channels |
21 |
|
Manually install channels |
21 |
|
Rename channels |
21 |
|
Reorder channels |
22 |
7 |
Connect devices |
23 |
|
Back connectors |
23 |
|
Bottom connectors |
23 |
|
Side connectors |
23 |
|
Connect a computer |
24 |
|
Add devices |
24 |
|
Use Philips EasyLink |
25 |
|
Use a Kensington lock |
26 |
|
|
|
8 |
Product information |
27 |
|
Supported display resolutions |
27 |
|
Tuner/Reception/Transmission |
27 |
|
Multimedia |
27 |
|
Remote control |
27 |
|
Power |
27 |
|
SupportedTV mounts |
27 |
|
|
|
|
|
|
9 |
Troubleshooting |
29 |
|
General TV issues |
29 |
|
TV channel issues |
29 |
|
Picture issues |
29 |
|
Sound issues |
30 |
|
HDMI connection issues |
30 |
|
Computer connection issues |
30 |
|
Contact us |
30 |
|
|
|
10 Index |
31 |
English
EN 1
1 Notice
2010 Koninklijke Philips Electronics N.V. All rights reserved.
- # notice.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than* " validity and suitability must be obtained. Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.
Philips cannot be held responsible either for any errors in the content of this document or for any problems as a result of the content in this document. Errors reported to Philips will be corrected and published on the Philips support website as soon as possible.
Pixel characteristics
This LCD product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen.This is a structural property of the display (within common industry standards) and is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Philips; ! < to do so shall void any warranty, stated or implied.
Any operation expressly prohibited in this manual, any adjustments, or assembly
procedures not recommended or authorised in this manual, shall void the warranty.
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in
general have the ability to emit and receive electromagnetic signals.
One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field (EMF) standards applicable at the time of producing the products.
Philips is committed to develop, produce and market products that cause no adverse health! " handled properly for their intended use, they# available today.
Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.
Copyright
$%&'* $%&' # $ # +% Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries.
Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world.
All other registered and unregistered trademarks are the property of their respective owners.
Portions of this software are copyright ©The FreeType Project (www.freetype.org).
2EN
2 Important
Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply.
Safety
=Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
=Never place the TV, remote control orX > " sources, including direct sunlight.
* X> " " TV, remote control and batteries at all times.
=Never insert objects into the ventilation slots or other openings on the TV.
=When the TV is swivelled ensure that
no strain is exerted on the power cord. Strain on the power cord can loosen connections and cause arcing.
=Never expose the remote control or batteries to rain, water or excessive heat.
=Avoid force coming onto power plugs.
Loose power plugs can cause arcing or!
Risk of injury or damage to the TV!
=Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs.
=When stand mounting the TV, use only the supplied stand. Secure the stand to# ! > * surface that can support the combined weight of the TV and the stand.
=When wall mounting the TV, use only a wall mount that can support the weight of the TV. Secure the wall mount to a wall that can support the combined weight of the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility for improper wall mounting that result in accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the TV from toppling over and causing injury to children:
=Never place the TV on a surface covered by a cloth or other material that can be pulled away.
=Ensure that no part of the TV hangs over the edge of the surface.
=Never place the TV on tall furniture (such as a bookcase) without anchoring both the furniture and TV to the wall or a suitable support.
=Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries!
=The product/remote control may
contain a coin-type battery, which can be swallowed. Keep the battery out of reach of children at all times!
Risk of overheating!
=Q ! Always leave a space of at least 4 inches or 10 cm around the TV for ventilation. Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of damage to the TV!
=Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.
English
EN 3
=Never place the TV or any objects on the power cord.
=To easily disconnect the TV power cord from the power outlet, ensure that you have full access to the power cord at all times.
=When you disconnect the power cord, always pull the plug, never the cable.
=Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable.
Risk of hearing damage!
=Avoid using earphones or headphones at high volumes or for prolonged periods of time.
Low temperatures
=If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet.
Screen care
=Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.
=Unplug the TV before cleaning.
=Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.
=Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object.
=To avoid deformations and colour fading, wipe off water drops as soon as possible.
Disposal of your old product and batteries
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal household waste.
Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste.
Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health.
4EN
3 Your TV
Congratulations on your purchase, and" Z " support that Philips offers, register your TV at www.philips.com/welcome.
This section gives you an overview of commonly usedTV controls and functions.
Side controls and indicators
1
2
3
54
a+/-: Increases or decreases volume. b : Selects connected devices.
cP/CH +/-: Switches to the next or previous channel.
dPower switch: Switches the TV on or off.
eAmbient sensor/ Standby indicator/ Remote control sensor
Remote control
|
|
English |
29 |
1 |
|
2 |
|
|
28 |
|
|
3 |
|
|
27 |
4 |
|
26 |
5 |
|
6 |
|
|
|
|
|
25 |
7 |
|
8 |
|
|
|
|
|
|
9 |
|
|
10 |
|
24 |
11 |
|
|
12 |
|
|
13 |
|
|
14 |
|
|
15 |
|
|
16 |
|
23 |
17 |
|
18 |
|
|
|
|
|
|
19 |
|
|
20 |
|
22 |
21 |
|
|
EN |
5 |
a (Standby-On)
=Switches the TV to standby if it is on.
=Switches on the TV if it is in standby.
b TELETEXT
Toggles teletext on or off.
c SOURCE
Selects connected devices.
dColour buttons
Select tasks, options or teletext pages. Available in selected models only.
eSLEEP
Sets a delay after which the TV switches to standby.
fDUAL
Switches Stereo and Nicam Stereo to & ! # # [% '\ or second language (Dual II) in bilingual programmes.
g (Home)
Toggles the home menu on or off.
h OPTIONS
Accesses options relating to the current activity or selection.
iOK
; " !% matrix of channels.
j (Navigation buttons)
Navigate menus.
k INFO
Displays programme information, if available.
l (Backward)
Searches backward.
m (Forward)
Searches forward.
n (Play/Pause)
Starts, pauses or resumes disc play.
o (Record)
Starts or stops video recording.
p (Stop)
Stops disc play.
q (Mute)
Mutes or restores volume.
rCH +/- (Channel +/-)
Switches to the next or previous channel.
s FORMAT
Selects a picture format.
t0-9 (Numeric buttons)
Selects a channel or setting.
uPICTURE (Smart picture)
Launches the smart picture menu.
v SOUND (Smart Sound)
Launches the smart sound menu.
w +/- (Volume +/-)
Increases or decreases volume.
x BACK A/CH
Returns to a previous screen.
Toggles between the current channel and the last viewed channel.
y BROWSE
Displays a matrix of channels.
zSCENEA (Wallpaper)
Displays wallpaper on your TV screen.
{DEMO
Toggles the demonstration menu on or off.
|TV
Switches back to the antenna source from EasyLink mode.
} INCR. SURR
Enables Incredible Surround for stereo sources. Enables spatial mode for mono sources.
6EN
Remote control usage
When using the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects.
~5m
~30˚
English
EN 7
4 Use your TV |
Switch channels |
This section helps you perform basic TV operations (see ‘Use more of your TV’ on page 10).
Switch your TV on/off or to standby
To switch on
=If the standby indicator is off, press Power switch at the bottom of the TV.
=If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
=Press(Standby-On) on the remote control.
» The standby indicator switches to red.
To switch off
=Press the Power switch at the bottom of
the TV.
» The standby indicator switches off.
Tip
=Though your TV consumes very little power when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet.
=Press BACK A/CH on the remote control to return to the previously viewed channel.
=Press CH +/- on the remote control or P/CH +/- on the side of the TV.
=Press OK to use the channel matrix.
=Enter a channel number using the
Numeric buttons.
Note
=When you use a favourite list, you can only select those channels in the list.
Watch connected devices
Use the source button
1Press SOURCE.
» The source list appears.
2Press or to select the connected device.
3Press OK to watch the connected device.
EN
Use the home menu
Note
=You can add new devices to the home menu for easy access.
1 Press (Home).
» The home menu appears.
2Press to select the device.
3Press OK to watch the connected device on your TV.
Adjust TV volume
To increase or decrease volume
=Press +/- on the remote control or at
the side of the TV.
To mute or unmute sound
=Press to mute the sound.
=Press again to restore the sound.
Use teletext
1PressTELETEXT.
» The main index page appears.
2Select a page as follows:
=Press the Numeric buttons to enter a page number.
=Press CH +/- orto view the next or previous page.
=Press the Colour buttons to select a colour coded item.
=PressingBACK to return to the previously viewed page.
3PressTELETEXT to exit teletext.
English
EN 9