2446.2 en.qxd 03-08-2006 15:32 Pagina 1
Help?
If this instruction manual does not give an answer or if ‘Tips’ do not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet.
Please, have the Model and Product number which you can find at the back of your television set or on the packaging, ready, before calling the Philips helpline.
Model: 37PF7320/79 37PF7320/98 42PF7320/79 42PF7320/98 42PF7420/79 42PF7420/98 50PF7320/79 50PF7320/98 42PF7520Z/79
Product No:
Introduction
Thank you for purchasing this television set.
This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly.
We hope our technology meets entirely with your satisfaction.
Table of Contents
Recycling
°The materials used in your set are either reusable or can be recycled. To minimise environmental waste, specialist companies collect used
appliances and dismantle them after retrieving any materials that can be used again (ask your dealer for further details).
English
3104 315 2446.2
1
2446.2 en.qxd 03-08-2006 15:32 Pagina 2
Care of the screen
Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the screen permanently. Do not rub with dust clothes with chemical treatment. Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the screen. When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage.
Do not use liquid cleaners or aerosol cleaners. Wipe off saliva or water drops as soon as possible. Their long time contact with the screen causes deformations and colour fading.
Warning concerning stationary images on the TV screen
A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a permanent after-image to remain on the screen. This is called phosphor burn in.
Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen.
Black Bars
When black bars appear at the left and right side of the screen, it is recommended to change to a picture format so that the picture fills the entire screen.
Preparation
&Wall mounting instructions/Table stand
According to the type of TV you’ve purchased a wall mount bracket and/or stand may be supplied. How to mount the supplied stand and/or wall mount bracket, see the supplied Quick Start Guide. Make sure that the wall mount is being fixed securely enough so that it meets safety standards.
The weight of the TV (excl. packaging) is about 23,2 kg (37PF7320); 37,3 kg (42PF7320/7520Z); 27kg (42PF7420); 50 kg (50PF7320).
Note: Other (not supplied) stands are optional accessories. Consult your dealer.
éFor ventilation, leave at least 5 cm free all around the TV.
To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.
The equipment shall not be exposed to dripping or splashing.
“Insert the aerial plug firmly into the aerial socket x at the bottom of the TV. For best picture quality use the suppressor-aerial cable supplied.
‘ To connect peripheral equipment, see p. 6.
(Insert the mains cord supplied into the mains at the bottom of the TV and in the wall socket having a mains voltage of 110 - 220V / 220 - 240V (see p.22).
To prevent damaging the power (AC) cord which could cause a fire or electric shock, do not place the TV on the cord.
§Remote control: Pull out the plastic insulation sheet from the battery, this will activate the remote control.
The battery supplied with the appliance does not
CR 2025 contain mercury or nickel
cadmium so as to protect
the environment. Please do not discard your used batteries, but use the recycling methods available (consult your distributor).
èSwitch the TV on : Press the power switch B at the right side of the TV.
An indicator on the front of the TV lights up. Press the -P+ keys or the B key on the remote control.
2
2446.2 en.qxd 03-08-2006 15:32 Pagina 3
To use the menus
&Press the MENU key on the remote control to summon the main menu.
éUse the cursor up/down to select Picture,
Sound, Features or Install.
“Use the cursor in the right direction to select the menu item.
‘Use the cursor up/down again to select a setting.
( Use the cursor left/right to adjust.
§To exit the menus, press the MENU key repeatedly.
Note: Items temporary not available or not relevant are displayed in a light grey colour and cannot be selected.
TV menu
TV Menu
Picture π |
Brightness |
Sound
Features
Install
Picture menu:
•Brightness: this changes picture brilliance.
•Colour: this changes the intensity of the colour.
•Contrast: this changes the difference between the light and dark tones.
•Sharpness: this changes the picture definition.
•Hue: this adjusts the picture to obtain natural skintones.
•Colour Temp.: this changes the colour rendering: Cool (bluer); Normal (balanced) or Warm (redder).
TV Menu |
Sound |
|
Picture |
Equalizer π |
120 Hz |
Sound π |
Balance |
500 Hz |
Features |
(AVL) |
1500 Hz |
Install |
Dolby Virtual |
5 kHz |
|
|
10 kHz |
* Manufactured under license from Dolby Laboratories. Dolby’ ‘Pro Logic’ and the double-D symbol are trademarks of Dolby Laboratories.
Sound menu:
•Equalizer: to adjust the sound tone (from bass 120 Hz to treble 10 kHz).
•Balance: this balances the sound on the left and right speakers.
•(AVL (Automatic Volume Leveller): this is used to limit increases in sound, especially on programme change or advertising slots.)
•Dolby Virtual: simulates the surround sound experience from two speakers using Dolby Pro Logic* providing the listener with the sensation of being surrounded by additional speakers.
TV Menu |
Features |
|
|
Picture |
Timer π |
(Sleep) |
|
Child Lock |
Time |
||
Sound |
|||
Contrast+ |
Start Time |
||
Features π |
|||
NR |
Stop Time |
||
Install |
|||
PIP |
Channel |
||
|
Features menu:
•Timer, Child lock and PIP: see p. 17-18.
•Contrast+: automatic adjustment of the picture contrast which permanently sets the darkest part of the picture to black.
•NR: attenuates picture noise (snow) in difficult reception conditions.
Install menu: see p. 14
3
2446.2 en.qxd 03-08-2006 15:32 Pagina 4
x Pixel Plus
(Only available
• Press the x The screen is
- in the left part Pixel Plus is switched off;
- In the right part Pixel Plus is switched on.
• Press the x key again to switch the Pixel Plus demo off
®Ò‡π†
Video recorder or DVD keys
Q Surround mode
Virtual Dolby* Surround
Optimal with Dolby surround signals.
Enables you to experience the effect of Dolby surround Pro Logic, reproducing a rear sound effect. See Sound menu, Dolby Virtual, p. 3.
Note:You can make the same selection in the Sound menu, p. 3.
AV To display the Source list to select TV or peripheral equipment connected to CVI-1, AV, PC- VGA/CVI-2, HDMI/PC-D or Side. See also p. 6.
h Active control
Optimizes the picture quality according to the quality of the reception.
Press this key to switch between
On, On with sensor and Off.
MENU Main menu on/off
Cursor keys
Press the keys oœpπ to navigate through the menus.
VOL To adjust the volume.
0/9 Digit keys
To select a TV channel.
For a two digit programme number, enter the second digit before the dash disappears.
B Standby
Press to switch the TV on or off from or to standby mode.
When switched off, a red indicator on the TV lights up.
channel
Press to display the previously selected TV channel.
2446.2 en.qxd 03-08-2006 15:32 Pagina 5
MODE* Press this key to switch between TV, DVD and AUX functions.
q 16:9 formats
The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen).
4:3 picture sometimes have a black band at the top and the bottom of the screen (letterbox format).
This function allows you to optimise the picture display on screen.
Using the different formats
Press the q key or use the keys pπ to select the different modes: 4:3, Movie Expand 14:9, Movie Expand 16:9, Subtitle Zoom, Superzoom and Widescreen.
4:3
The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture.
Movie Expand 14:9
The picture is enlarged to 14:9 format, a thin black band remains on both sides of the picture.
Movie Expand 16:9
The picture is enlarged to 16:9 format.This mode is recommended when displaying pictures which have black bands at the top and bottom (letterbox format).
Subtitle Zoom
This mode is used to display 4:3 pictures using the full surface of the screen leaving the subtitles visible.
Superzoom
This mode is used to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture.
Widescreen
This mode restores the correct proportions of pictures
transmitted in 16:9 using the full screen display.
Note: If you display a 4:3 picture in this mode, it will be enlarged horizontally.
i Screen information
To display/remove the programme number, the name (if it exists), the time, the sound mode and the time remaining on the timer.
Hold down for 5 seconds to permanently display the programme number on the screen.
* Mode selector
The remote control lets you control the main functions of the VCR or DVD. Press the MODE key to select the required mode: DVD or AUX (VCR).
The remote control indicator lights up to display the selected mode. It switches off automatically after 20 seconds if left idle.The remote control automatically returns to TV mode.
The following keys are operational, depending on the equipment:
B, X, ®Ò‡π†, OK, MENU, cursor keys, -P+, digit keys, i, 0.
5
2446.2 en.qxd 03-08-2006 15:32 Pagina 6
Keys on the right side of the TV
- VOLUME + MENU/OK - PROGRAM + POWER
Should your remote be lost or broken you can still change some of the basic settings with the keys on the right side of your TV.
Press:
•POWER : to switch the TV on or off.
•+ VOLUME - : to adjust sound level.
•+ PROGRAM - : to select programmes.
•MENU : to access or close menus.
The + PROGRAM - keys can be used to select an adjustment and the + VOLUME - keys to make that adjustment.
Rear connections
There is a wide range of audio and video devices that can be connected to your TV.The following connection diagrams show you how to connect them to the TV.
CVI-1 can handle YPbPr and Audio L/R; AV CVBS,Y/C and Audio L/R; PC-VGA/CVI-2 VGA or YPbBr and Audio L/R; HDMI/PC-D HDMI or DVI.
MONITOR OUT |
CVI-1 |
PC-VGA/CVI-2 /PC-D
2446.2 en.qxd 03-08-2006 15:32 Pagina 7
Recorder (VCR-DVD+RW)
CABLE
3 4
IN OUT
RECORDER
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display. Keep a minimum distance of 0,5m from the screen.
& Connect the RF Antenna cable 1 to the RF IN socket of your recorder.
éConnect another RF cable 2 from the output OUT of your recorder to the TV’s input x
ANTENNA 75 Ω jack.
“Better playback quality can be obtained if you also connect the Video,Audio Left and Right (only for stereo equipment) AV cables 3 to the VIDEO, AUDIO L and R input jacks of AV.
‘Press the AV key on the remote control repeatedly until AV is selected.
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable 4 with the S-VIDEO input. S-Video does not provide audio, so audio cables must still be connected to provide sound.
MONITOR OUT
6 |
The MONITOR OUT connector can be used for daisy chaining or to record programs from your TV 6. Only when a recorder is connected to MONITOR OUT it is possible to record an analog program from your TV. See Record with your recorder, p. 13.
IN OUT
RECORDER
7