WelcometotheTelstraultimate®
mobilebroadbandusb
The following steps will guide you through installing your Telstra Ultimate Mobile Broadband USB,which is designed to operate on Telstra’s Next G™ network.
Your package contains:
USB modem with TRU-Install
This Quick Start Guide
Laptop screen clip
USB extension cable
You can also purchase the following accessory for your modem:
External antenna — improves performance in areas with low signal strength. See your local Telstra Shop or Telstra Dealer for assistance with picking the best antenna option for you as well as help with installation.
You can use the Telstra Ultimate Mobile Broadband USB with these operating systems:
Windows® 7
Windows Vista®
Windows XP
(Windows 64 bit editions are also supported) Mac OS® X 10.5 or later
1
external antenna connectors
PoWER LED 
Data LED
USB connector
2
Installation
This modem is TRU Installenabled and does not require a CD for installation.
1Remove the back cover and insert the SIM card as shown in the illustrations.
3 |
SIM card slot |
|
2 Insert the modem into the USB slot.
Windows
The software installation process starts automati cally.Follow the on-screen prompts to install the Telstra Connection Manager software.
Mac OS X
When the Telstra Connection Manager window appears,double-click the installer package.
3Once the software is installed,the modem searches for a network.When the modem finds a network, the Connect button in the Connection Manager becomes available.
Click Connect to connect to your network.
4
Loading...