MSI MEG X570 Unify Manual

Quick Start

Thank you for purchasing the MSI® MEG X570 UNIFY motherboard. This Quick Start section provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code.

Kurzanleitung

Danke, dass Sie das MSI® MEG X570 UNIFY Motherboard gewählt haben. Dieser Abschnitt der Kurzanleitung bietet eine Demo zur Installation Ihres Computers. Manche Installationen bieten auch die Videodemonstrationen. Klicken Sie auf die URL, um diese Videoanleitung mit Ihrem Browser auf Ihrem Handy oder Table anzusehen. Oder scannen Sie auch den QR Code mit Ihrem Handy, um die URL zu öffnen.

Présentation rapide

Merci d’avoir choisi la carte mère MSI® MEG X570 UNIFY. Ce manuel fournit une rapide présentation avec des illustrations explicatives qui vous aideront à assembler votre ordinateur. Des tutoriels vidéo sont disponibles pour certaines étapes. Cliquez sur le lien fourni pour regarder la vidéo sur votre téléphone ou votre tablette. Vous pouvez également accéder au lien en scannant le QR code qui lui est associé.

Быстрыйстарт

Благодарим вас за покупку материнской платы MSI® MEG X570 UNIFY. В этом разделе представлена информация, которая поможет вам при сборке комьютера. Для некоторых этапов сборки имеются видеоинструкции. Для просмотра видео, необходимо открыть соответствующую ссылку в веб-браузере на вашем телефоне или планшете. Вы также можете выполнить переход по ссылке, путем сканирования QR-кода.

Quick Start I

Installing a Processor/ Installation des Prozessors/ Installer un processeur/Установкапроцессора

Youtube

https://youtu.be/Xv89nhFk1vc

1

3

2

5 4

	6	8
		9

7	CPU_FAN1

II Quick Start

Important

If you are installing the screw-type CPU heatsink, please follow the figure below to remove the retention module first and then install the heatsink.

Wenn Sie einen CPU-Kühler mit Schraubenbefestigung einsetzen, folgen Sie bitte den Anweisungen unten um das Retention-Modul zu entfernen und den Kühler zu installieren.

Si vous voulez installer un ventirad pour processeur à vis, veuillez suivre les instructions ci-dessous pour d’abord retirer le module de rétention puis installer le ventirad.

В случае установки процессорного кулера с системой крепления на винтах, следуйте указаниям на рисунке ниже для снятия пластикового модуля крепления. Затем установите кулер.

1

2

3

Quick Start III

Installing DDR4 memory/ Installation des DDR4-Speichers/

InstallerunemémoireDDR4/УстановкапамятиDDR4

Youtube

http://youtu.be/T03aDrJPyQs

DIMMA2	DIMMA2	DIMMA1
		DIMMA2
	DIMMB2	DIMMB1
		DIMMB2

IV Quick Start

Connecting the Front Panel Header/ Anschließen der Frontpanel-Stiftleiste/ Connecter un connecteur du panneau avant/Подключениеразъемовпереднейпанели

Youtube

http://youtu.be/DPELIdVNZUI

					-
					LED
				LED+			POWER
						POWER
			LED
		SW			HDD
		POWER
		SW
		RESET
	Power LED				Power Switch
		+ - + -						10
	JFP1	2
		1						9	Reserved
		+ - - +
		HDD LED			Reset Switch
1	HDD LED +				2				Power LED +
3	HDD LED -				4				Power LED -
5	Reset Switch				6				Power Switch
7	Reset Switch				8				Power Switch
9	Reserved				10				No Pin

HDD LED

POWER LED

RESETSW

HDDLED

JFP1

HDD LED -

HDD LED +

POWER LED - POWER LED +

Quick Start V

Installing the Motherboard/ Installation des Motherboards/

Installerlacartemère/Установкаматеринскойплаты

1

2

BAT1

VI Quick Start

Connecting the Power Connectors/ Stromanschlüsse anschliessen/ Connecter les câbles du module d’alimentation/

Подключениеразъемовпитания

Youtube

http://youtu.be/gkDYyR_83I4

ATX_PWR1

CPU_PWR1

CPU_PWR2

Quick Start VII

Installing SATA Drives/ Installation der SATA-Laufwerke/

InstallerledisquedurSATA/УстановкадисковSATA

Youtube

http://youtu.be/RZsMpqxythc

1

2	3

5

4

VIII Quick Start

Installing a Graphics Card/ Einbau der Grafikkarte/ Installer unecartegraphique/Установкадискретнойвидеокарты

Youtube

http://youtu.be/mG0GZpr9w_A

1

3

2

5

4

6

Quick Start IX

Connecting Peripheral Devices/ Peripheriegeräte/ Connecter unpériphériqueanschliessen/Подключениепериферийных устройств

X Quick Start

PowerOn/Einschalten/Mettresous-tension/Включение питания

1 2

3

4

Quick Start XI

NOTE

XII Quick Start

Contents
Safety Information.................................................................................................	3
Specifications.........................................................................................................	4
JCORSAIR1 Connector Specification ..................................................................	11
Package contents ................................................................................................	11
Rear I/O Panel......................................................................................................	12
LAN Port LED Status Table...................................................................................	12
Audio Ports Configuration.....................................................................................	12
Realtek Audio Console..........................................................................................	13
Installing Antennas...............................................................................................	15
Overview of Components.....................................................................................	16
Processor Socket..................................................................................................	17
DIMM Slots............................................................................................................	18
PCI_E1~5: PCIe Expansion Slots..........................................................................	19
M2_1~3: M.2 Slots (Key M)....................................................................................	21
SATA1~4: SATA 6Gb/s Connectors.......................................................................	23
JFP1, JFP2: Front Panel Connectors...................................................................	23
CPU_PWR1~2, ATX_PWR1: Power Connectors....................................................	24
JAUD1: Front Audio Connector.............................................................................	24
JUSB1: USB 3.2 Gen 2 Type-C Connector............................................................	25
JUSB2~3: USB 3.2 Gen1 Connector......................................................................	25
JUSB4~5: USB 2.0 Connectors.............................................................................	26
JTPM1: TPM Module Connector...........................................................................	26
CPU_FAN1, PUMP_FAN1, SYS_FAN1~5: Fan Connectors..................................	27
JCI1: Chassis Intrusion Connector.......................................................................	28
JBAT1: Clear CMOS (Reset BIOS) Jumper...........................................................	29
POWER1, RESET1: Power Button, Reset Button..................................................	29
JRGB1: RGB LED connector.................................................................................	30
JRAINBOW1~2: Addressable RGB LED connectors.............................................	31
JCORSAIR1: CORSAIR Connector.........................................................................	32
Onboard LEDs.......................................................................................................	33
EZ Debug LED.......................................................................................................	33
JPWRLED1: LED power input...............................................................................	33
Debug Code LED...................................................................................................	33
Hexadecimal Character Table..............................................................................	34
Boot Phases..........................................................................................................	34

Contents 1

Debug Code LED Table.........................................................................................	34
ACPI States Codes.................................................................................................	37
Installing OS, Drivers & Utilities..........................................................................	38
Installing Windows® 10..........................................................................................	38
Installing Drivers...................................................................................................	38
Installing Utilities..................................................................................................	38
BIOS Setup............................................................................................................	39
Entering BIOS Setup.............................................................................................	39
Resetting BIOS......................................................................................................	40
Updating BIOS.......................................................................................................	40
EZ Mode.................................................................................................................	42
Advanced Mode ....................................................................................................	44
OC Menu................................................................................................................	45

2 Contents

Safety Information

∙∙The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly.

∙∙Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.

∙∙Hold the motherboard by the edges to avoid touching sensitive components. ∙∙It is recommended to wear an electrostatic discharge (ESD) wrist strap when

handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard.

∙∙Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed.

∙∙Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.

∙∙Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user.

∙∙If you need help during any installation step, please consult a certified computer technician.

∙∙Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.

∙∙Keep this user guide for future reference. ∙∙Keep this motherboard away from humidity.

∙∙Make sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the electrical outlet.

∙∙Place the power cord such a way that people can not step on it. Do not place anything over the power cord.

∙∙All cautions and warnings on the motherboard should be noted.

∙∙If any of the following situations arises, get the motherboard checked by service personnel:

▪▪Liquid has penetrated into the computer.

▪▪The motherboard has been exposed to moisture.

▪▪The motherboard does not work well or you can not get it work according to user guide.

▪▪The motherboard has been dropped and damaged. ▪▪The motherboard has obvious sign of breakage.

∙∙Do not leave this motherboard in an environment above 60°C (140°F), it may damage the motherboard.

Safety Information 3

Specifications

CPU	Supports 2nd and 3rd Gen AMD Ryzen™ / Ryzen™ with
	Radeon™ Vega Graphics and 2nd Gen AMD Ryzen™ with
	Radeon™ Graphics Desktop Processors for Socket AM4
Chipset	AMD® X570 Chipset
	∙∙4x DDR4 memory slots, support up to 128GB*
	▪▪3rd Gen AMD Ryzen™ Processors support DDR4 1866/
	2133/ 2400/ 2667/ 2800/ 2933/ 3000/ 3066/ 3200 Mhz by
	JEDEC, and 2667/ 2800 /2933 /3000 /3066 /3200 /3466
	/3600/ 3733 /3866 /4000 /4133 /4266 /4400 /4533 /4600
	Mhz by A-XMP OC MODE
	▪▪2nd Gen AMD Ryzen™ Processors, 1st and 2nd Gen
	AMD Ryzen™ with Radeon™ Vega Graphics Processors
Memory	support DDR4 1866/ 2133/ 2400/ 2667/ 2800/ 2933/ 3000/
	3066/ 3200 Mhz by JEDEC, and 2667 /2800 / 2933 /3000
	/3066 /3200 /3466 /3600 Mhz by A-XMP OC MODE
	∙∙Dual channel memory architecture
	∙∙Supports non-ECC UDIMM memory
	∙∙Supports ECC UDIMM memory (non-ECC mode)
	∙∙Supports un-buffered memory
	* Please refer www.msi.com for more information on compatible memory.
	∙∙2x PCIe 4.0/ 3.0 x16 slots (PCI_E1, PCI_E3)
	▪▪3rd Gen AMD Ryzen™ support PCIe 4.0 x16/x0, x8/x8
	modes
	▪▪2nd Gen AMD Ryzen™ support PCIe 3.0 x16/x0, x8/x8
	modes
	▪▪Ryzen™ with Radeon™ Vega Graphics and 2nd Gen
Expansion Slots	AMD Ryzen™ with Radeon™ Graphics support PCIe 3.0
	x8 mode*
	∙∙1x PCIe 4.0/ 3.0 x16 slot (PCI_E5, supports x4 mode)
	∙∙2x PCIe 4.0/ 3.0 x1 slots**
	* PCI_E3 slot is only available for 2nd and 3rd Gen AMD Ryzen™ processors.
	** The PCIe x1 slots can not be used simultaneously. PCI_E2 will be unavailable
	when installing the PCIe card in PCI_E4 slot.
	***The speeds may vary for different devices
	Continued on next page

4 Specifications

		Continued from previous page
	Multi-GPU	∙∙Supports 2-Way NVIDIA® SLI® Technology
		∙∙Supports 3-Way AMD® CrossFire™ Technology
	LAN	1x Realtek® RTL8125 2.5 Gbps LAN controller
		Intel® Wi-Fi 6 AX200
	Wireless LAN &	▪▪Supports 802.11 a/b/g/n/ac/ax, MU-MINO Rx, 2.4GHz-
		5GHz (160MHz) up to 2.4Gbps
	Bluetooth®	▪▪Supports Bluetooth® 5
		▪▪The Wireless module is pre-install in the M2_4 (Key-E)
		slot
	Audio	Realtek® ALC1220 Codec
		∙∙7.1-Channel High Definition Audio
		∙∙Supports Optical S/PDIF output
		AMD® X570 Chipset
		∙∙4x SATA 6Gb/s ports
		∙∙2x M.2 slots (M2_2/ M2_3, Key M)*
		▪▪Support PCIe 4.0/ 3.0 x4 and SATA 6Gb/s
		▪▪Support 2242/ 2260 /2280 storage devices
	Storage	AMD® Processor
		∙∙1x M.2 slot (M2_1, Key M)*
		▪▪Supports PCIe 4.0 x4 (3rd Gen AMD Ryzen™)
		▪▪Supports PCIe 3.0 x4 (2nd Gen AMD Ryzen™/ Ryzen™
		with Radeon™ Vega Graphics and 2nd Gen AMD Ryzen™
		with Radeon™ Graphics)
		▪▪Supports 2242/ 2260 /2280/ 22110 storage devices
		*The speeds may vary for different devices
	RAID	∙∙Support RAID 0, RAID 1 and RAID 10
		Continued on next page

Specifications 5

Continued from previous page

		AMD® X570 Chipset
		▪▪3x USB 3.2 Gen2 (SuperSpeed USB 10Gbps) ports
		(2 Type-A ports on the back panel, 1 Type-C internal
		connector)
		▪▪4x USB 3.2 Gen1 (SuperSpeed USB) ports through the
		internal USB 3.2 Gen1 connectors
		▪▪6x USB 2.0 (High-speed USB) ports (2 Type-A ports
	USB	on the back panel, 4 ports through the internal USB 2.0
		connectors)
		AMD® Processor
		▪▪2x USB 3.2 Gen2 (3rd Gen AMD Ryzen™) or USB 3.2
		Gen1 (2nd Gen AMD Ryzen™/ Ryzen™ with Radeon™
		Vega Graphics and 2nd Gen AMD Ryzen™ with Radeon™
		Graphics) ports (1x Type-A & 1x Type-C) on the back
		panel
		▪▪2x USB 3.2 Gen1 (SuperSpeed USB) Type-A ports on
		the back panel
	I/O Controller	NUVOTON NCT6797 Controller Chip
	Hardware Monitor	∙∙CPU/ System/Chipset temperature detection
		∙∙CPU/ System/Chipset fan speed detection
		∙∙CPU/ System/Chipset fan speed control
	Form Factor	∙∙ATX Form Factor
		∙∙12 in. x 9.6 in. (30.5 cm x 24.4 cm)
		∙∙1x 256 Mb flash
	BIOS Features	∙∙UEFI AMI BIOS
		∙∙ACPI 6.1, SM BIOS 2.8
		∙∙Multi-language
		Continued on next page

6 Specifications

Continued from previous page

∙∙1x 24-pin ATX main power connector ∙∙2x 8-pin ATX 12V power connectors ∙∙4x SATA 6Gb/s connectors

∙∙2x USB 2.0 connectors (support additional 4 USB 2.0 ports) ∙∙2x USB 3.2 Gen 1 connectors (support additional 4 USB 3.2 Gen 1 ports)

∙∙1x USB 3.2 Gen 2 Type-C Port ∙∙1x 4-pin CPU fan connector

∙∙5x 4-pin system fan connectors ∙∙1x 4-pin water-pump connector ∙∙1x Front panel audio connector

Internal Connectors ∙∙2x System panel connectors ∙∙1x TPM module connector ∙∙1x Clear CMOS jumper

∙∙1x Chassis Intrusion connector ∙∙1x Power button

∙∙1x Reset button

∙∙1x 4-pin RGB LED connector

∙∙2x 3-pin RAINBOW LED connectors ∙∙1x 3-pin CORSAIR connector

∙∙1x 2-pin LED power input ∙∙1x Debug Code LED

∙∙4x EZ Debug LEDs

Continued on next page

Specifications 7

Continued from previous page

	∙∙1x Clear CMOS Button
	∙∙1x Flash BIOS Button
	∙∙1x WiFi/ Bluetooth module
	∙∙1x PS/2 keyboard/ mouse combo port
Back Panel	∙∙2x USB 2.0 ports
	∙∙2x USB 3.2 Gen 1 ports
Connectors	∙∙1x LAN(RJ45) port
	∙∙1x USB 3.2 Gen 2/ 1 Type C port
	∙∙1x USB 3.2 Gen 2/ 1 Type A port
	∙∙2x USB 3.2 Gen 2 Type A ports
	∙∙5x OFC audio jacks
	∙∙1x Optical S/PDIF Out connector
	∙∙Drivers
	∙∙DRAGON CENTER
Software	∙∙Nahimic Audio
	∙∙CPU-Z MSI GAMING
	∙∙MSI App Player (BlueStacks)
	∙∙Google Chrome™ ,Google Toolbar, Google Drive
	∙∙Norton™ Internet Security Solution
	∙∙Gaming Optimization
	∙∙Gaming Hotkey
	∙∙Mystic Light
Dragon Center	∙∙Hardware Monitor
	∙∙True Color
Features		Please refer to
	∙∙Live Update
		http://download.msi.com/manual/
	∙∙Speed Up	for more details.
	∙∙Smart Tool	mb/DRAGONCENTER2.pdf
	∙∙Super Charger
	Continued on next page

8 Specifications

Continued from previous page

∙∙Audio

▪▪Audio Boost HD ▪▪Nahimic 3 ▪▪Voice Boost

∙∙Network

▪▪LAN Manager

▪▪2.5G LAN

▪▪Intel WiFi AX

∙∙Storage

▪▪Lightning Gen 4 M.2

▪▪Triple M.2

∙∙Cooling

▪▪Zero Frozr Technology

Special Features ▪▪Frozr Heatsink Design

▪▪Propeller Blade technology ▪▪M.2 Shield Frozr

▪▪Pump Fan

▪▪Gaming Fan Control

∙∙LED

▪▪Mystic Light

▪▪Mystic Light Extension (RGB) ▪▪Mystic Light Extension (RAINBOW) ▪▪Mystic Light Extension(CORSAIR) ▪▪Mystic light SYNC

▪▪EZ DEBUG LED ∙∙Protection

▪▪PCI-E Steel Armor ▪▪Pre-installed IO shielding

Continued on next page

Specifications 9

Continued from previous page

∙∙Performance

▪▪Lightning Gen 4 PCI-E Slot

▪▪Multi GPU-SLI Technology

▪▪Multi GPU-CrossFire Technology

▪▪DDR4 Boost

▪▪Core Boost

▪▪GAME Boost

▪▪OC Engine (Clock gen) ▪▪USB with type A+C ▪▪AMD Turbo USB 3.2 Gen 2

Special Features ▪▪Front USB Type-C

▪▪Dual CPU Power

∙∙USER Experience

▪▪Dragon Center

▪▪Gaming Hotkey ▪▪Speed Up ▪▪Total Fan control ▪▪Live Update ▪▪APP Player

∙∙BIOS

▪▪Click BIOS 5

▪▪Flash BIOS Button

10 Specifications

JCORSAIR1 Connector Specification

	Supporting CORSAIR RGB Products			Maximum connection
	Lighting PRO RGB LED Strip			20*
				* 20% brightness is recommended when the number of
				LED strips exceeds 8.
	HD120 RGB Fan			6
	SP120 RGB Fan			6
	LL120 RGB Fan			6
	Package contents
Please check the contents of your motherboard package. It should contain:
	Motherboard	MEG X570 UNIFY
		SATA 6Gb/s Cables			4
	Cable	1 to 2 RGB LED Extension Y Cable 80cm			1
		CORSAIR RGB LED Extension Cable 50cm			1
		RAINBOW RGB LED Extension Cable 80cm			1
		Antenna Set			1
	Accessories	M.2 screw			3
		Case Badge			1
		SATA Cable Labels			1
		Product Registration Card			1
	Application DVD	Driver DVD			1
	Documentation	User Manual			1
		Quick Installation Guide			1

Important

If any of the above items are damaged or missing, please contact your retailer.

Package contents 11

Rear I/O Panel

Wi-Fi Antenna	PS/2 Combo port	2.5 Gbps	Audio Ports
connectors
Clear CMOS	USB 3.2	LAN
	Gen1
button	Type-A

Flash

BIOS Button

USB

3.2

Optical S/PDIF-Out

Gen 2

USB 2.0 Type-A

Gen 2Type-C*

USB 3.2 Gen 2

USB 3.2

Type-A

Flash BIOS Port

Type-A*

*USB 3.2 Gen2 (3rd Gen AMD Ryzen™) or USB 3.2 Gen1 (2nd Gen AMD Ryzen™/ Ryzen™ with Radeon™ Vega Graphics and 2nd Gen AMD Ryzen™ with Radeon™ Graphics)

∙∙Clear CMOS button - Power off your computer. Press and hold the Clear CMOS button for about 5-10 seconds to reset BIOS to default values.

∙∙Flash BIOS Port/ Button - Please refer to page 41 for Updating BIOS with Flash BIOS Button.

LAN Port LED Status Table

Link/ Activity LED		Speed LED
Status	Description	Status	Description
Off	No link	Off	10 Mbps
Yellow	Linked	Green	100 Mbps / 1 Gbps
Blinking	Data activity	Orange	2.5 Gbps

Audio Ports Configuration

	Audio Ports		Channel
		2	4	6	8
	Center/ Subwoofer Out			●	●
	Rear Speaker Out		●	●	●
	Line-In/ Side Speaker Out				●
	Line-Out/ Front Speaker Out	●	●	●	●
	Mic In
	(●: connected, Blank: empty)

12 Rear I/O Panel

Realtek Audio Console

After Realtek Audio Console is installed. You can use it to change sound settings to get better sound experience.

Application Enhancement

Device

Selection

Main Volume

Connector Settings	Jack		Status

∙∙Device Selection - allows you to select a audio output source to change the related options. The check sign indicates the devices as default.

∙∙Application Enhancement - the array of options will provide you a complete guidance of anticipated sound effect for both output and input device.

∙∙Main Volume - controls the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar.

∙∙Jack Status - depicts all render and capture devices currently connected with your computer.

∙∙Connector Settings - configures the connection settings.

Auto popup dialog

When you plug into a device at an audio jack, a dialogue window will pop up asking you which device is current connected.

Each jack corresponds to its default setting as shown on the next page.

Important

The pictures above for reference only and may vary from the product you purchased.

Rear I/O Panel 13

Audio jacks to headphone and microphone diagram

Audio jacks to stereo speakers diagram

AUDIO INPUT

Audio jacks to 7.1-channel speakers diagram

AUDIO INPUT

Rear	Front
Side	Center/
	Subwoofer

14 Rear I/O Panel

Installing Antennas

1. Combine the antenna with the base.

2. Screw two antenna cables tight to the WiFi antenna connectors as shown.

2

1

3. Place the antenna as high as possible.

Rear I/O Panel 15

Overview of Components

PCI_E1

PCI_E2

JBAT1

JCI1 PCI_E3 M2_3 PCI_E4 JTPM1 PCI_E5 JRAINBOW2

CPU_PWR2 CPU_PWR1

Processor

Socket CPU_FAN1

PUMP_FAN1

JRGB1

JCORSAIR1

SYS_FAN4

DIMMB2

SYS_FAN2

DIMMB1

DIMMA2

DIMMA1

SYS_FAN5

		ATX_PWR1
		M2_1
		JUSB3
	BAT1	SATA▼1▲2
		SATA▼3▲4
		M2_2
		JFP1
		JFP2
	JAUD1	JRAINBOW1
		RESET1
	SYS_FAN1
	SYS_FAN3	POWER1
	JPWRLED1
		JUSB2JUSB1
	JUSB4 JUSB5

16 Overview of Components

Processor Socket

Distance from the center of the

CPU to the nearest DIMM slot.

53.62 mm

Introduction to the AM4 processor

The surface of the AM4 processor has a yellow triangle to assist in correctly lining up the processor for motherboard placement. The yellow triangle is the Pin 1 indicator.

Important

∙∙When changing the processor, the system configuration could be cleared and reset BIOS to default values, due to the AM4 processor’s architecture.

∙∙Always unplug the power cord from the power outlet before installing or removing the CPU.

∙∙When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.

∙∙Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.

∙∙Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.

∙∙If you purchased a separate CPU and heatsink/ cooler, Please refer to the documentation in the heatsink/ cooler package for more details about installation. ∙∙This motherboard is designed to support overclocking. Before attempting to overclock, please make sure that all other system components can tolerate overclocking. Any attempt to operate beyond product specifications is not recommended. MSI® does not guarantee the damages or risks caused by inadequate operation beyond product specifications.

Overview of Components 17

DIMMA2

DIMMB2

DIMMA1

DIMMA2

DIMMB1

DIMMB2

DIMM Slots

DIMMA1

DIMMB1

Channel A

Channel B

DIMMA2

DIMMB2

Memory module installation recommendation

DIMMA2

Important

∙∙Always insert memory modules in the DIMMA2 slot first.

∙∙Due to chipset resource usage, the available capacity of memory will be a little less than the amount of installed.

∙∙Based on processor specification, the Memory DIMM voltage below 1.35V is suggested to protect the processor.

∙∙Some memory modules may operate at a lower frequency than the marked value when overclocking due to the memory frequency operates dependent on its Serial Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory frequency if you want to operate the memory at the marked or at a higher frequency. ∙∙It is recommended to use a more efficient memory cooling system for full DIMMs installation or overclocking.

∙∙The stability and compatibility of installed memory module depend on installed CPU and devices when overclocking.

∙∙Due to AM4 processor/ memory controller official specification limitation, the frequency of memory modules may operate lower than the marked value under the default state. Please refer www.msi.com for more information on compatible memory.

18 Overview of Components