MOTOROLA MC10EP01D, MC10EP01DR2 Datasheet
MC10EP01
4-Input OR/NOR
The MC10EP01 is a 4–input OR/NOR gate. The device is
functionally equivalent to the EL01 device, LVEL01, and E101 (a
quad version). With AC performance much faster than the LVEL01
device, the EP01 is ideal for applications requiring the fastest AC
performance available.
• 230ps T ypical Propagation Delay
• High Bandwidth to 3 Ghz T ypical
• PECL mode: 3.0V to 5.5V V
• ECL mode: 0V V
with VEE = –3.0V to –5.5V
CC
• 75kΩ Internal Input Pulldown Resistors
• ESD Protection: >4KV HBM, >200V MM
• Moisture Sensitivity Level 1, Indefinite Time Out of Drypack.
For Additional Information, See Application Note AND8003/D
• Flammability Rating: UL–94 code V–0 @ 1/8”,
Oxygen Index 28 to 34
• Transistor Count = 1 15 devices
1
D0
with VEE = 0V
CC
V
CC
http://onsemi.com
8
1
SO–8
D SUFFIX
CASE 751
MARKING DIAGRAM*
8
HEP01
ALYW
1
*For additional information, see Application Note
AND8002/D
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
2
D1
3
45
D3
Figure 1. 8–Lead Pinout (Top View) and Logic Diagram
78Q
6
QD2
V
EE
PIN DESCRIPTION
PIN
D0–D3
Q, Q
TRUTH TABLE
D0 D1 D2 D3 Q Q
LLLLLH
HXXXHL
XHXXHL
XXHXHL
XXXHHL
HHHHHL
ORDERING INFORMATION
Device Package Shipping
MC10EP01D SOIC 98 Units/Rail
FUNCTION
ECL Data Inputs
ECL Data Outputs
Semiconductor Components Industries, LLC, 1999
September, 1999 – Rev. 1.0
MC10EP01DR2 SOIC 2500 Tape & Reel
1 Publication Order Number:
MC10EP01/D
MC10EP01
MAXIMUM RATINGS*
Symbol Parameter Value Unit
V
EE
V
CC
V
I
V
I
I
out
T
A
T
stg
θ
JA
θ
JC
T
sol
* Maximum Ratings are those values beyond which damage to the device may occur.
DC CHARACTERISTICS, ECL/LVECL (VCC = 0V, VEE = –5.5V to –3.0V) (Note 3.)
Symbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit
IEE
V
OH
V
OL
V
IH
V
IL
I
IH
I
IL
NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The
1. VCC = 0V, VEE = V
2. All loading with 50 ohms to VCC –2.0 volts.
3. Input and output parameters vary 1:1 with VCC.
Power Supply Current
(Note 1.)
Output HIGH Voltage
(Note 2.)
Output LOW Voltage
(Note 2.)
Input HIGH Voltage Single Ended –1210 –885 –1145 –820 –1085 –760 mV
Input LOW Voltage Single Ended –1935 –1610 –1870 –1545 –1810 –1485 mV
Input HIGH Current 150 150 150 µA
Input LOW Current –150 –150 –150 µA
circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained.
Power Supply (VCC = 0V) –6.0 to 0 VDC
Power Supply (VEE = 0V) 6.0 to 0 VDC
Input Voltage (VCC = 0V, VI not more negative than VEE) –6.0 to 0 VDC
Input Voltage (VEE = 0V, VI not more positive than VCC) 6.0 to 0 VDC
Output Current Continuous
Operating Temperature Range –40 to +85 °C
Storage Temperature –65 to +150 °C
Thermal Resistance (Junction–to–Ambient) Still Air
Thermal Resistance (Junction–to–Case) 41 to 44 ± 5% °C/W
Solder Temperature (<2 to 3 Seconds: 245°C desired) 265 °C
–40°C 25°C 85°C
20 24 31 20 24 31 20 24 31 mA
–1135 –1060 –885 –1070 –945 –820 –1010 –885 –760 mV
–1935 –1810 –1685 –1870 –1745 –1620 –1810 –1685 –1560 mV
EEmin
to V
, all other pins floating.
EEmax
Surge
500lfpm
50
100
190
130
mA
°C/W
http://onsemi.com
2
MC10EP01
DC CHARACTERISTICS, LVPECL (VCC = 3.3V ± 0.3V, VEE = 0V) (Note 6.)
–40°C 25°C 85°C
Symbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit
IEE
V
OH
V
OL
V
IH
V
IL
I
IH
I
IL
NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The
4. VCC = 3.0V, VEE = 0V, all other pins floating.
5. All loading with 50 ohms to VCC –2.0 volts.
6. Input and output parameters vary 1:1 with VCC.
Power Supply Current
(Note 4.)
Output HIGH Voltage
(Note 5.)
Output LOW Voltage
(Note 5.)
Input HIGH Voltage Single Ended 2090 2415 2155 2480 2215 2540 mV
Input LOW Voltage Single Ended 1365 1690 1430 1755 1490 1815 mV
Input HIGH Current 150 150 150 µA
Input LOW Current –150 –150 –150 µA
circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained.
DC CHARACTERISTICS, PECL (VCC = 5.0V ± 0.5V, VEE = 0V) (Note 9.)
Symbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit
IEE
V
OH
V
OL
V
IH
V
IL
I
IH
I
IL
NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The
7. VCC = 5.0V, VEE = 0V, all other pins floating.
8. All loading with 50 ohms to VCC –2.0 volts.
9. Input and output parameters vary 1:1 with VCC.
Power Supply Current
(Note 7.)
Output HIGH Voltage
(Note 8.)
Output LOW Voltage
(Note 8.)
Input HIGH Voltage Single Ended 3790 4115 3855 4180 3915 4240 mV
Input LOW Voltage Single Ended 3065 3390 3130 3455 3190 3515 mV
Input HIGH Current 150 150 150 µA
Input LOW Current –150 –150 –150 µA
circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained.
20 24 31 20 24 31 20 24 31 mA
2165 2240 2415 2230 2355 2480 2290 2415 2540 mV
1365 1490 1615 1430 1555 1680 1490 1615 1740 mV
–40°C 25°C 85°C
20 24 31 20 24 31 20 24 31 mA
3865 3940 4115 3930 4055 4180 3990 4115 4240 mV
3065 3190 3315 3130 3255 3380 3190 3315 3440 mV
http://onsemi.com
3
Loading...