HP HSMA-T425, HSMA-T525, HSMA-T625, HSMA-T725, HSMJ-T425 Datasheet

H

Surface Mount High

Performance AlInGaP LED

Indicators

Technical Data

Features

•Outstanding LED Material Efficiency

•Exceptional Light Output Over a Wide Range of Drive Currents

•Colors: 590 nm Amber, 603 nm Orange, and 615 nm Reddish-Orange

•Compatible with Automatic Placement Equipment

•Compatible with Convective IR, Vapor Phase Reflow, and TTW Solder Processes

•Packaged in 12 mm or 8 mm Tape on 7" or 13" Diameter Reels

•EIA Standard Package

•Low Package Profile

•Non-diffused Package Excellent for Backlighting and Coupling to Light Pipes

Description

The LED material used in these devices is the very efficient absorbing Substrate aluminum indium gallium phosphide (AS AlInGaP), capable of producing high light output over a wide range of drive currents.

These solid state surface mount indicators are designed with a flat top and sides to be easily handled by automatic placement equipment. A glue pad is provided for adhesive mounting processes. They are compatible with convective IR and vapor phase reflow soldering, through the wave (TTW) soldering, and conductive epoxy attachment processes.

The package size and configuration conform to the EIA-535

SunPower Series

HSMA-TX25

HSMD-TX25

HSMJ-TX25

BAAC standard specification for case size 3528 tantalum capacitors. The folded leads permit dense placement and provide an external solder joint for ease of inspection.

These devices are non-diffused, providing high intensity for applications such as backlighting, light pipe illumination, and front panel indication.

Device Selection Guide

Amber	Orange	Reddish-Orange
λd = 590 nm	λd = 603 nm	λd = 615 nm	Description
HSMA-T425	HSMD-T425	HSMJ-T425	12 mm Tape, 7" Reel, 2000 Devices
HSMA-T525	HSMD-T525	HSMJ-T525	12 mm Tape, 13" Reel, 8000 Devices
HSMA-T625	HSMD-T625	HSMJ-T625	8 mm Tape, 7" Reel, 2000 Devices
HSMA-T725	HSMD-T725	HSMJ-T725	8 mm Tape, 13" Reel, 8000 Devices

5964-9352E

1-199

Package Dimensions

3.5 ± 0.2

(0.138 ± 0.008)

2.8 ± 0.2
	2.2				2.7		NOM.
			NOM.
(0.110 ± 0.008)	(0.087)				(0.106)

NOTES:

1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).

2. THE LEADS ARE COPPER ALLOY, 85% Sn/15% Pb PLATING.

CATHODE NOTCH

3.1 NOM.

(0.122)

1.9 ± 0.2

(0.075 ± 0.008)

0.7 MIN.

(0.028)

0.1

(0.004)

NOM.

	0.8 ± 0.3	1.3	2.2 ± 0.1
	(0.031 ± 0.012)		(0.087	± 0.004)
		(0.050)
	(2 PLACES)
		MIN.

Tape and Reel

Specifications

Hewlett Packard surface mount LEDs are packaged tape and reel in accordance with EIA-481A,

Taping of Surface Mount

Components for Automatic Placement. This packaging system is compatible with tapefed automatic pick and place systems. Each reel is sealed in a

USER FEED

DIRECTION

CATHODE

PITCH: 4 mm (0.157 IN.)

	HEWLETT
hp	PACKARD

vapor barrier bag for added protection. Bulk packaging in vapor barrier bags is available upon special request.

REEL DIAMETER:

178 mm (7 IN.) OR 330 mm (13 IN.)

CARRIER TAPE WIDTH:

12 mm (0.472 IN.) OR 8 mm (0.315 IN.)

1-200