Loading...
QuickSpecs
HPE 525 802.11ac Dual Radio Access Point Series
Overview
HPE 525 802.11ac Dual Radio Access Point Series
Models
HP 525 Wireless Dual Radio 802.11ac |
(AM) Access Point |
JG993A |
|
HP 525 Wireless Dual Radio 802.11ac |
(WW) Access Point |
JG994A |
|
HP 525 |
Wireless Dual Radio 802.11ac |
(JP) Access Point |
JG995A |
HP 525 |
Wireless Dual Radio 802.11ac |
(IL) Access Point |
JG996A |
HP 525 Wireless Dual Radio 802.11ac |
(AM) 8-unit Eco-pack Access Points |
JG997A |
|
HP 525 Wireless Dual Radio 802.11ac |
(WW) 8-unit Eco-pack Access Points |
JG998A |
|
|
|
|
|
Key features
•Two-spatial stream 802.11ac MIMO Access Point with optional external antennas
•Up to 867 Mbps on the 802.11ac radio and 300 Mbps on the 2.4 GHz 802.11n radio
•Built-in spectral analysis scans the 2.4 GHz and 5 GHz bands to identify sources of RF interference
•Comprehensive WLAN security with intrusion detection and prevention offers threat protection
•Limited Lifetime Warranty
Introduction
HPE 525 802.11ac Dual Radio Access Point Series bring 867 Mbps performance, faster application processing, and increased range to 802.11 clients over 802.11n access points. Ideal for dense client environments and high bandwidth applications, the access points can be powered by Power over Ethernet (PoE) and offer full compatibility with legacy 802.11 clients and existing HP Unified wireless controllers.
The access points provide Radio Frequency spectrum analysis with detection and classification of non-IEEE 802.11 interference and has the ability to automatically avoid interference. Wireless security is comprehensive when operating with a controller; with integrated wireless IDS/IPS, support for internal and external authentication, authorization, and accounting (AAA) servers; built-in
Page 1
QuickSpecs |
HPE 525 802.11ac Dual Radio Access Point Series |
|
|
Overview
stateful firewall; per-user VLAN mapping; and authentication.
Features and benefits
Management
•Wi-Fi Clear Connect
provides a system-wide approach to improving WLAN reliability by proactively determining and adjusting to changing RF conditions; helps optimize WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources using spectrum analysis capabilities built into the access points, identifying rogue activity, and making decisions at a systemwide level.
•Advanced radio resource management
oAutomatic radio power adjustments
include real-time power adjustments based on changing environmental conditions and signal coverage
adjustment
o Automatic radio channel
provides intelligent channel switching and real-time Interference detection o Intelligent client load balancing
determines number of clients across neighboring APs and adjusts client allocation to balance the load
oAirtime fairness
provides equal RF transmission time for wireless clients
•Spectrum analysis
oPower/frequency spectrum analysis
measures noise from IEEE 802.11 remote sources
oSignal detection/classification
identifies source of RF interference, for example, Bluetooth®, cordless phones, and microwave ovens
oEvaluation of channel quality
helps detect severe channel degradation and improve the reporting of poor RF performance
•Integrated Wireless IDS/IPS
detects and locates and mitigates unknown and rogue devices (see controller datasheet for details))
•Access point management via a wireless controller
provides secure web browser (SSL and VPN), command-line interface, SNMP v2c, SNMP v3, MIB-II with traps, and RADIUS
•Authentication Client MIB (RFC 2618); offers embedded HTML management tool with secure access (SSL and VPN); implements scheduled configuration and firmware upgrades from a central controller
•HPE Intelligent Management Center and Wireless Services Manager Software provides central management for discovery, logging, status, and configuration management
•Diagnostics
records association, authentication, and DHCP events in client event log; packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format); includes data rate matrix
•Compatible with HPE Unified Switches, Controllers and Module
oRefer to the HPE Access Point—Controller Compatibility Matrix at http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA5-0345ENW&cc=us&lc=en
o Refer to the release notes for minimum version numbers required.
Quality of Service (QoS)
•Rate limiting
supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums
•Centralized traffic
maintains Layer 2 and Layer 3 QoS settings when using centralized traffic or guest access
•IEEE 802.1p prioritization
Page 2
QuickSpecs |
HPE 525 802.11ac Dual Radio Access Point Series |
|
|
Overview
delivers data to devices based on the priority and type of traffic
•Wireless
o L2/L3/L4 classification
supports IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ
oMultiple SSIDs per radio
Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority
Connectivity
•IEEE 802.3 (PoE)
o simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
o802.3af the AP will operate with both radios at full performance
•Auto-MDIX
adjusts automatically for straight-through or crossover cables on the Ethernet interface
Mobility
•Two spatial stream MIMO technology
provides the latest in Wi-Fi technology, which allows for 867 Mbps in the 5GHz frequency band and 300 Mbps in the 2.4GHz band of signaling
•Band steering
redirects 5 GHz-capable clients automatically to the less-congested 5 GHz spectrum
•HPE 525 embedded antennas
provides excellent coverage through use of embedded high-gain antennas (4 dBi antenna at 2.4 GHz and 5 dBi antenna at 5 GHz); no need for the added cost of external antennas
•External antenna
oOptional external antenna for better antenna placement via RP-SMA connectors
•Anywhere, anytime wireless coverage
dual-radio IEEE 802.11b/g/n and 802.11a/n/ac access point; per-radio software-selectable configuration of frequency bands; self-healing, self-optimizing local mesh that extends network availability; Wi-Fi Alliance Certifications for interoperability with all IEEE 802.11a/b/g/n/ac client devices
•Medical standards
meets the European EN60601-1-2 standard for healthcare
•Multiple SSIDs
oUp to 16 SSIDs per radio, each with unique MAC address, configurable SSID broadcasts
o Individual security and QoS profiles
o Configurable DTIM and minimum data rate
oEach mapped to separate IEEE 802.1Q VLANs
oWMM and/or WMM-PS
oSecurity filter
•AP client access control functions
ooffers IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP
odelivers MAC address authentication using local or RADIUS access lists
oprovides RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2
osupports RADIUS Client (RFC 2865 and 2866) with location-aware support
oprovides Layer 2 wireless client isolation
Security
Page 3
QuickSpecs |
HPE 525 802.11ac Dual Radio Access Point Series |
|
|
Overview
•Integrated IDS support
o Automated AP and client classification
reduces manual effort (administrator can override AP classification) o Comprehensive detection capabilities
detects a wide range of attacks o Flexible event reporting
enables configuration of which events will result in notifications o Location tracking capabilities
helps identify the rogue device location
oFlexible deployment models
supports time slicing or dedicating a radio to detect full-time
osee the controller datasheet for more detail
•Choice of IEEE 802.11i, WPA2, or WPA
locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic
•TKIP/WEP encryption
is supported only on legacy IEEE 802.11a/b/g clients as it has been deprecated from the IEEE 802.11n and 802.11ac standards
•Local wireless bridge client traffic filtering
prevents communication between wireless devices associated with the same access point
Additional information
•RFC and standards
refer to the controller datasheet for details
Warranty and support
•Limited Lifetime Warranty
see http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
•Software releases
to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary
Page 4
Loading...