H
Surface Mount High
Performance AlInGaP LED
Indicators
Technical Data
•Outstanding LED Material Efficiency
•Exceptional Light Output Over a Wide Range of Drive Currents
•Colors: 590 nm Amber, 603 nm Orange, and 615 nm Reddish-Orange
•Compatible with Automatic Placement Equipment
•Compatible with Convective IR, Vapor Phase Reflow, and TTW Solder Processes
•Packaged in 12 mm or 8 mm Tape on 7" or 13" Diameter Reels
•EIA Standard Package
•Low Package Profile
•Non-diffused Package Excellent for Backlighting and Coupling to Light Pipes
The LED material used in these devices is the very efficient absorbing Substrate aluminum indium gallium phosphide (AS AlInGaP), capable of producing high light output over a wide range of drive currents.
These solid state surface mount indicators are designed with a flat top and sides to be easily handled by automatic placement equipment. A glue pad is provided for adhesive mounting processes. They are compatible with convective IR and vapor phase reflow soldering, through the wave (TTW) soldering, and conductive epoxy attachment processes.
The package size and configuration conform to the EIA-535
SunPower Series
HSMA-TX25
HSMD-TX25
HSMJ-TX25
BAAC standard specification for case size 3528 tantalum capacitors. The folded leads permit dense placement and provide an external solder joint for ease of inspection.
These devices are non-diffused, providing high intensity for applications such as backlighting, light pipe illumination, and front panel indication.
Amber |
Orange |
Reddish-Orange |
|
λd = 590 nm |
λd = 603 nm |
λd = 615 nm |
Description |
HSMA-T425 |
HSMD-T425 |
HSMJ-T425 |
12 mm Tape, 7" Reel, 2000 Devices |
|
|
|
|
HSMA-T525 |
HSMD-T525 |
HSMJ-T525 |
12 mm Tape, 13" Reel, 8000 Devices |
|
|
|
|
HSMA-T625 |
HSMD-T625 |
HSMJ-T625 |
8 mm Tape, 7" Reel, 2000 Devices |
|
|
|
|
HSMA-T725 |
HSMD-T725 |
HSMJ-T725 |
8 mm Tape, 13" Reel, 8000 Devices |
|
|
|
|
5964-9352E |
1-199 |
3.5 ± 0.2
(0.138 ± 0.008)
2.8 ± 0.2 |
|
|
|
|
|
|
|
2.2 |
|
|
2.7 |
|
NOM. |
||
|
NOM. |
|
|||||
(0.110 ± 0.008) |
(0.087) |
|
|
(0.106) |
|
||
|
|
|
|
||||
|
|
|
|
|
|
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. THE LEADS ARE COPPER ALLOY, 85% Sn/15% Pb PLATING.
CATHODE NOTCH
3.1 NOM.
(0.122)
1.9 ± 0.2
(0.075 ± 0.008)
0.7 MIN.
(0.028)
0.1
(0.004)
NOM.
0.8 ± 0.3 |
1.3 |
2.2 ± 0.1 |
||
(0.031 ± 0.012) |
(0.087 |
± 0.004) |
||
(0.050) |
||||
(2 PLACES) |
|
|
||
MIN. |
|
|
||
|
|
|
Tape and Reel
Specifications
Hewlett Packard surface mount LEDs are packaged tape and reel in accordance with EIA-481A,
Taping of Surface Mount
Components for Automatic Placement. This packaging system is compatible with tapefed automatic pick and place systems. Each reel is sealed in a
USER FEED
DIRECTION
CATHODE
PITCH: 4 mm (0.157 IN.)
|
HEWLETT |
hp |
PACKARD |
vapor barrier bag for added protection. Bulk packaging in vapor barrier bags is available upon special request.
REEL DIAMETER:
178 mm (7 IN.) OR 330 mm (13 IN.)
CARRIER TAPE WIDTH:
12 mm (0.472 IN.) OR 8 mm (0.315 IN.)
1-200