Grundig GBP 6100 2D User Manual

%OX UD\ 3OD\HU

*%3 '

(1

CONTENTS----------------------------------------------------------------------------------------------------------------------------------

3SET-UP AND SAFETY

4GBP 6100 2D

4 Packing contents

4 Special features

6 OVERVIEW

6The Blu-ray player controls

7The remote control

9CONNECTION AND PREPARATION

9Connecting the LED/LCD TV using an HDMI cable

9Connecting the LED/LCD TV using RCA cables

9Connecting a digital audio system with a coaxial cable

10Connecting an MP3 player or a USB memory stick

10 Connecting to the internet with ethernet cable

10Connecting to the mains supply

11Putting batteries in the remote control

12INITIAL SETUP

12Switching on the Blu-ray player

12Menu navigation

12First installation by using the Quick Setup

13First installation by using the functions in the main menu

13Selecting the language of the screen menu

13Adapting the Blu-ray player to the LED/ LCD-TV

15 Network settings

17 BD/DVD PLAYBACK

17Special features of Blu-ray Discs

17Special features of the DVD

17Preparation

17Inserting the disc

18Playback

18 Removing the disc

18 Adjusting the volume

18 Muting

18 Additional playback functions

21 BD LIVE

21Adding BD-Live memory to the player

21Setting up the player for BD-Live internet access

22Using BD-Live

22BD-Live notes

23PLAYING AUDIO/VIDEO FILES

23Playing the contents of a data device or a USB memory stick

24Playing picture CDs

25Playing audio CDs

26NetFusion MODE

26 About NetFusion

26Setting NetFusion function

27Preparation

27Using NetFusion function

28SPECIAL SETTINGS

28Audio settings

28Existing settings in the Audio menu

29Language settings

29Existing settings in the Language menu

30Parental control

30Existing settings in the Parental menu

31System settings

31Existing settings in the System menu

32INFORMATION

32Licence conditions

32Environmental note

33Cleaning the device

33Cleaning the disc

33Technical data

33System

34Troubleshooting

2 ENGLISH

SET-UP AND SAFETY-----------------------------------------------------------------------------------------------

Please note the following instructions when setting up the system:

7The device is designed for the playback of video and audio signals from compact discs, USB and similar data devices. Any other use is expressly prohibited.

7If you want to set up the device on wall shelves or in cupboards, please ensure that it is adequately ventilated. There must be at least 10 cm of space at the side, above and behind the device.

7Do not cover the device with newspapers, table cloths, curtains, etc.

7When setting up the device, remember that furniture is often coated with various types of varnish and plastic, which often contain chemical additives. These additives may cause corrosion to the feet of the unit. This may leave stains on the surface of the furniture which can be di cult or impossible to remove.

7If the device is exposed to sudden changes in temperature, for example when taken from the cold into a warm room, wait at least two hours before using it.

7The device is designed for use indoors. If you use it outdoors, make sure it is protected from moisture such as dripping or splashing water.

7 Use the device only in a moderate climate.

7Do not place the device close to heating units or in direct sunlight, as this will impair cooling.

7Do not place any vessels containing liquids, such as vases, on the device. Do not insert any foreign objects in the disc compartment.

7Do not place any objects such as burning candles on the device.

7Do not open the device casing under any circumstances. Warranty claims are excluded for damage resulting from improper handling.

7Thunderstorms are a danger to all electrical devices. Even if the device is switched o , it can be damaged by a lightning strike to the mains. Always disconnect the mains plug during a storm.

7Always keep the disc compartment closed to prevent dust from collecting on the laser optics.

7Do not use cleaning agents as they may damage the housing. Clean the device with a clean and dry cloth.

Notes:

7Do not connect any other equipment while the device is switched on. Switch off the other devices as well before connecting them.

7Only plug the device into the mains socket after you have connected the external devices. Make sure the power plug is freely accessible.

ENGLISH 3

GBP 6100 2D--------------------------------------------------------------------------------------------------------------------------

Packing contents

Blu-ray disc player Remote control

2 batteries

(Micro, R03/UM 4/AAA, 2 x 1,5 V) User manual

HDMI cable

		GBP 6100 2D
	BD Player
Two batteries
HDMI cable	User manual	Remote Control

Special features

7Grundig Blu-ray Disc player provides high definition video playback at up to 1080 p resolution for an amazing viewing experience.

7Upconversion of standard definition DVDs for enhanced picture quality at up to 1080 p over an HDMI connection.

7 Rich multi channel surround sound.

7Easy and simple HDTV connection using a single HDMI cable.

7Digital and analogue outputs for connecting your home theater system or amplifier.

7PIP functionality that lets you display primary and secondary video at the same time (if available on the Blu-ray Disc).

7Pop-up menu display without interrupting playback (if available on the Blu-ray Disc).

7HDMI 1080 p /50 fps output (Blu-ray Disc only) that provides smooth playback of video with a frame rate of 50 frames per second (TV must be connected with an HDMI cable and be compatible with 1080 p 50 frame).

7Access to BD-Live functions, with internet connection and an additional memory (if available on the Blu-ray Disc).

7The device supports NetFusion. This allows you to combine media streaming with controlling a connected media receiver while streaming content to it from another PC on a network.

7The MP3 and WMA music data formats can also be played back via USB input or Audio CDs.

7It is possible to display digital photograph files that have been burned onto a data disc, DVD+/-R, DVD+/-R/(W) or a Blu-ray Disc.

7 The DIGI LINK

Your player is equipped with the DIGI

LINK function. This function uses the

CEC (Consumer Electronics Control) protocol.

CEC allows external devices which are connected to the »HDMI« sockets by an HDMI cable (e.g. Blu-ray Disc player and LCD/LED-TV) to be operated with a remote control.

Prerequisite is that the devices connected support CEC. Read the user manual for the LCD/ LED-TV to find out how to activate the corresponding function.

4 ENGLISH

GBP 6100 2D--------------------------------------------------------------------------------------------------------------------------

Disc type

Logo

Blu-ray Disc

DVD-video Disc

(DVD-ROM)

DVD-RW

DVD+RW

DVD-R

DVD+R

Video-CD(VCD)

WMA

JPEG

MPEG4

Notes:

7Writable DVD discs (DVD-RW, DVD-R) must be finalized; only VR-mode is allowed. Playback may not work for some types of discs, or when specific operations, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer to this if necessary.

7Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback.

7CD-R/-RW, DVD-RW/-R recorded with UDF or ISO9660 format can be played back.

7Windows Media Audio (WMA) files must be written to the disc with a .wma file extension in order to be recognized and played back properly.

7JPEG picture files must be written to the disk with an .jpeg or .jpg file extension in order to be recognized and played back properly.

CD-R

CD-RW

MP3

ENGLISH 5

OVERVIEW----------------------------------------------------------------------------------------------------------------------------------

The Blu-ray player controls

The front of the device

			.	e!		9
						GBP 6100 2D
Disc compartment	IR sensor	Display	Power indicator			USB

Disc com-

partment

•

Power indicator

Compartment for BDs/ CDs.	9			Switches the device on from standby
				mode and o again.
Infra-red sensor for remote				Plays next title, chapter, track or file if
control signals.				exists.
Display of the device.				Plays previous title, chapter, track or
Lights up when the device is at				file if exists.
standby mode.				Starts and pauses playback.
USB socket for connecting	.			Opens or closes the disc compart-
MP3 player, a USB memory				ment.
stick or a card-reading device.

The back of the device

			GBP 6100 2D
			BLU-RAY DISC PLAYER
			AC:110-240 V~ 50/60 Hz
			POWER:17 W	SN
			GLR 5810
110-240 V 50/60 Hz	Ethernet	HDMI OUT	VIDEO OUT
			COAXIAL
		AUDIO OUT L/R

110 - 240 V 50/60 Hz

ETHERNET

HDMI OUT

AUDIO OUT L/R

6 ENGLISH

Power cord.

Socket for connecting the internet.

Video/audio output socket (digital signal) for connecting LED/LCD-TV.

Audio output sockets (left/ right analogue channel) for connecting an audio system.

VIDEO OUT	Video output	socket for
	connecting a	LED/LCD-
	TV or AV receiver with an
	RCA socket.
COAXIAL	Audio output socket (coax-
	ial) for connecting a dig-
	ital multi-channel audio/
	video ampliÞer.

OVERVIEW----------------------------------------------------------------------------------------------------------------------------------

The remote control

9Switches the device on from standby mode and o again.

	Opens or closes the disc com-
	partment.
1 - 0	Number buttons for various data.
SEARCH	Press repeatedly to switch be-
	tween search modes: title, chap-
	ter and time. Then use number
	buttons and ÈENTERÇ button to
	select the point you want to play.
RETURN	Press to return to the previous
	menu during the settings or the
	folder or menus when playing a
	WMA/MP3/JPEG disc.
OSD	Shows current playback status
	and time information.
SUBTITLE	Press to enable/disable subtitles
	during BD/DVD playback. If the
	disk has more than one subtitle
	language, use the cursor buttons
	to select the subtitle languages
	and press ÈENTERÇ to conÞrm.
A-B	During playback, press once to
	store a Òstart pointÓ for repeating
	playback. Press again to select
	an Òend pointÓ, then the play-
	back repeats from the beginning
	to the end (not available on all
	disks). The third press cancels
	this function.
REPEAT	Cycles through the possible re-
	peat modes based on content
	played.

3Rewinds the playback to the beginning.

4Fast forwards the playback to the end.

			Plays previous title, chapter, track
			or file if exists.
			Plays next title, chapter, track or
			file if exists.
7			Stops the playback.
			Starts or pauses playback.

ENGLISH 7

OVERVIEW----------------------------------------------------------------------------------------------------------------------------------

!8	Frame-by-frame playback.

DISC MENU Immediately stops playback and brings up the main or 'top' menu of the BD or DVD disc. (Not available on all discs). In the main menu, you can typically choose subtitle language, audio track, or different scene etc.

POPUPMENU On BD discs: to bring up the TITLE MENU main movie menu (not available

on all discs).

aASs	Cursor buttons, select various
	functions in the menus.
ENTER	Confirms selected functions in
	the menus.
SETUP	Opens the settings menu of the
	device.
ANGLE	Selects various camera angles
	for certain scenes or passages
	on the BD and DVD during play-
	back (not available on all discs).
COLOR	The red, green, yellow and blue
BUTTONS	buttons start disc-specific fea-
	tures on some BD discs (if avail-
	able on the Blu-ray Disc).
RESOLUTION	At stop mode, sets the video out-
	put resolution (your TV should
	support setting the resolution.
	Please refer to your TV's user
	manual).
PIP	Opens the PIP function.
SECONDARY	During PIP playback, press to set
AUDIO	the audio of the second video.
MUTE	Mutes the sound.
ZOOM	Zooms in on scenes during play-
	back (only DVD).
– VOLUME + Sets the volume.
AUDIO	During playback, press to set the
	audio channel.

8 ENGLISH

CONNECTION AND PREPARATION---------------------------------------

Notes:

7Do not connect any other equipment while the device is switched on.

Switch off the other equipment as well before connecting it.

7Only plug the device into the mains socket after you have connected the external devices.

Connecting the LED/LCD TV using an HDMI cable

Television	BD Player

1 Connect the enclosed HDMI cable into the »HDMI« socket on the back of the device and the corresponding socket (HDMI) on the LED/ LCD TV.

Connecting the LED/LCD TV using RCA cables

Television	BD Player
	To video input (yellow)
	To audio inputs (red,white)

1Connect a standard cinch cable (not supplied) into the »VIDEO OUT« socket on the back of the device and the corresponding socket (VIDEO IN) on the LED/LCD TV.

2Connect standard cinch cables (not supplied) into the »AUDIO OUT L/R« sockets on

the back of the device and the appropriate sockets (AUDIO IN) on the LED/LCD TV.

Connecting a digital audio system with a coaxial cable

Television

BD Player

To Video input

Amplifier

To Coaxial-

digital audio

input

Coaxial cable

1Connect a coaxial digital cable into the digital output »COAXIAL« on the back of the device and into the corresponding socket of the digital amplifier.

ENGLISH 9

CONNECTION AND PREPARATION---------------------------------------

Connecting an MP3 player or a USB memory stick

GBP 6100 2D

Note:

7The device must be switched off while the USB connection is being made. If it is not switched off, data can be lost.

1Switch o the device by pressing È9Ç.

2Connect the USB interface of the MP3 player

to the ÈÇ socket on the device, using a standard USB cable;

or

insert the USB plug of the USB memory stick in the ÈÇ socket on the device.

Notes:

7To remove the MP3 player or the USB memory stick, switch off the device and pull out the cable for the data medium.

7The USB socket on the device does not support a connection for a USB extension cable and is not designed for directly connecting to a computer.

Connecting to the internet with ethernet cable

Splitter

Modem Router

Telephone socket

BD Player

1 Connect the Ethernet socket of the modem/ router to the ÈETHERNETÇ socket of the device using a standard network cable (Twisted pair, RJ45 plug).

Ð The data throughput level is 10/100 Mbit.

Connecting to the mains supply

Notes:

7Check that the mains voltage on the type plate (on the back of the device) corresponds to your local mains supply. If this is not the case, contact your specialist dealer.

7Before connecting the AC power cord to the wall socket, ensure that all other connections have been made.

1Plug the power cord into the wall socket.

Caution:

7The device is connected to the mains with the power cord. Pull out the power plug if you want to completely disconnect the device from the mains.

7Make sure the power plug is easily accessible during operation and not hindered by other objects.

10 ENGLISH

CONNECTION AND PREPARATION---------------------------------------

Putting batteries in the remote control

1 Open the battery compartment by pressing down on the catch and then remove the lid.

2 Observe the polarity marked on the base of the battery compartment when inserting the batteries (micro batteries, 2 x 1.5 V, R 03/ UM 4/AAA).

3Close the lid of the battery compartment.

Notes:

7Do not expose the batteries to extreme heat, caused for example by direct sunlight, heaters or fire.

7Remove the batteries when they are flat or when you know that the device will not be used for a long period of time. The manufacturer accepts no liability for damage caused by leaking batteries.

Environmental note:

7Batteries, including those which do not contain heavy metal, should not be disposed of with household waste. Always dispose of used batteries in accordance with local environmental regulations.

ENGLISH 11

INITIAL SETUP----------------------------------------------------------------------------------------------------------------------

Switching on the Blu-ray player

If you connect the device to the mains, it switches to standby.

1Plug the power cord into the wall socket.

ÐThe power indicator turns on.

2Press È9Ç.

ÐThe power indicator turns o .

ÐDisplay: ÈHELLOÇ.

3Switch on the LED/LCD-TV, select the input setting on the LED/LCD-TV that matches the connection method you used to connect the Blu-ray player.

Menu navigation

When you switch on the device, the main menu of the device automatically appears on the screen.

4XLFN 6HWXS

6HWWLQJV

0HGLD

1HW)XVLRQ 1HW)XVLRQ

1 Use the cursor buttons ÈAÇ, ÈSÇ, ÈsÇ or ÈaÇ to move through the menu.

2 ConÞrm your selection by pressing ÈENTERÇ.

%' /LYH

		'LVSOD\			/DQJXDJH
				26'	(QJOLVK
			$XGLR
				0HQX	$XWR
	6HWWLQJV	/DQJXDJH		$XGLR	$XWR
				6XEWLWOH	1RQH

3DUHQWDO

6\VWHP

1HWZRUN

3 Press ÈRETURNÇ to return to the main menu.

First installation by using the Quick Setup

Use the ÈQuick SetupÇ function to make the initial settings.

If you need more settings, refer to the chapter "First installation by using the functions in the main menu", see next page.

1Press ÈSETUPÇ to open the main menu.

2In the main menu select ÈQuick SetupÇ by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

ÐDisplay: ÈWould you like to do Quick Setup? Yes - NoÇ appears.

3Select ÈYesÇ by using ÈaÇ or ÈsÇ and press ÈENTERÇ to conÞrm.

ÐDisplay: ÈOSD Language SettingsÇ menu appears.

4Select your language by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

ÐDisplay: ÈResolutionÇ menu appears.

5Depending on the type of the TV connected to the device, select resolution by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

ÐDisplay: ÈTV AspectÇ menu appears.

6Depending on the type of the TV connected to the device, select TV Aspect by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

ÐDisplay: ÈQuick Setup Complete! ExitÇ appears.

7Press ÈENTERÇ to exit the Quick Setup.

12 ENGLISH

INITIAL SETUP----------------------------------------------------------------------------------------------------------------------

First installation by using the functions in the main menu

Selecting the language of the screen menu

1Press »SETUP« to open the main menu.

2In the main menu select »Settings« by using »A« or »S« and press »ENTER« to confirm.

3Select »Language« by using »A« or »S« and press »ENTER« to confirm.

%' /LYH

		'LVSOD\		/DQJXDJH
			26'	(QJOLVK
		$XGLR
			0HQX	$XWR
	6HWWLQJV	/DQJXDJH	$XGLR	$XWR
			6XEWLWOH	1RQH

3DUHQWDO 6\VWHP

1HWZRUN

4 Select »OSD« by using »A« or »S« and press »ENTER« to confirm.

5Select your language by using »A« or »S« and press »ENTER« to confirm.

6Press »RETURN« to return to the »Settings« menu.

Adapting the Blu-ray player to the LED/LCD-TV

Setting the TV system (TV norm)

Select »PAL« for LED/LCD-TV with the PAL system or »NTSC« for those with the NTSC system.

1 In the »Settings« menu select »Display« by using »A« or »S« and press »ENTER« to confirm.

2Select »TV Type« by using »A« or »S« and press »ENTER« to confirm.

6\VWHP

	1HWZRUN		'LVSOD\
			+'0, 6WDWXV	&RQQHFWHG
	%' /LYH
			+'0, SUHIHUUHG )RUPDW	3
6HWWLQJV		'LVSOD\	79 7\SH	176&
			5HVROXWLRQ	+'0, $XWR
		$XGLR	79 $VSHFW	:LGH
			)LOP 0RGH S	2II
	/DQJXDJH		'HHS &RORU	$XWR

3DUHQWDO

3Choose the setting (»PAL« or »NTSC«) by using »A« or »S« and press »ENTER« to confirm.

Setting the HDMI resolution

You can select the ideal setting for the connected LED/LCD-TV. The abbreviation behind the number means: »p« = progressive, »i« = interlace.

The function can only be selected once the LED/ LCD-TV is connected to the »HDMI« socket.

1 In the »Display« menu select »Resolution« by using »A« or »S« and press »ENTER« to confirm.

	6\VWHP	3OHDVH FKRRVH D QHZ 5HVROXWLRQ VHWWLQJ
	1HWZRUN
		+'0, $XGLR
	%' /LYH	S
	'LVSOD\	L	¦
	$XGLR	S
		S
	/DQJXDJH	L
	3DUHQWDO

2 Choose the setting (»HDMI Auto«, »1080p«, »1080i«, »720p«, »576p«, »576i« ) by using »A« or »S« and press »ENTER« to confirm.

ENGLISH 13

INITIAL SETUP --------------------------------------------------------------------------------------------------------------------

Note:

7The output resolution is based on the type of LED/LCD-TV connected to the device, as described in the table below:

	Correct
LED/LCD-TV TYPE	Resolution
	Setting
If your TV is a standard-deÞni-	576i/480i
tion PAL TV (SD TV)
If your TV is an enhanced-deÞni-	576p/480p
tion TV (EDTV)
If your TV is a high-deÞnition TV	720p
(HDTV) capable of 720p only
If your TV is a high-deÞnition TV	1080i
(HDTV) capable of 1080i only
If your TV is HDMI equipped,
and if your TV is a high-deÞ-
nition TV (HDTV) capable of	1080p
1080p [any frame rate], and	(HDMI)
you are connected to your TV
via HDMI,
If your TV is HDMI equipped,
and you are connected to
your TV via HDMI, and you
wish the BD player to set the	HDMI auto
output based on information
exchanged between the TV
and the player over the HDMI
cable.

Selecting the TV format

The setting depends on your LED/LCD-TV. If you have a LED/LCD-TV with a 4:3 format, select the 4:3 setting; if you have a LED/LCD-TV with a 16:9 format, select the 16:9 setting.

1 In the ÈDisplayÇ menu select ÈTV AspectÇ by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

2Choose the setting (È16:9 WideÇ, È16:9 PillarboxÇ, È4:3 Pan and ScanÇ, È4:3 LetterboxÇ) by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

Selecting the film mode

The movies are recorded on film at a rate of 24 frames per second. However not all televisions can display 24 frames per second. Off can be selected for 50 frames per second format.

Only the HDMI output of the player is capable of supporting1080 p video output at any frame rate.

1 In the ÈDisplayÇ menu select ÈFilm Mode (1080p24)Ç by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

2 Choose the setting (ÈAutoÇ, ÈO Ç) by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

Setting deep color

HDMI 1.3 supports 10-bit, 12-bit and 16bit (RGB or YCbCr) color depths while 8-bit was supported in previous versions. This expands the colors displayed from millions to billions, which is much more vivid than the previous.

1 In the ÈDisplayÇ menu select ÈDeep colorÇ by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

2Select ÈAutoÇ or ÈO Ç by using the cursor buttons and press ÈENTERÇ to conÞrm.

End settings for the LED/LCD-TV

1 Press ÈSETUPÇ to return to the main menu.

14 ENGLISH

INITIAL SETUP----------------------------------------------------------------------------------------------------------------------

Network settings

The device must be connected to a wired router with an ethernet cable.

Please see chapter "CONNECTION AND PREPARATION".

1Press »SETUP« to open the main menu.

2In the main menu select »Settings« by using »A« or »S« and press »ENTER« to confirm.

3Select »Network« by using »A« or »S« and press »ENTER« to confirm.

/DQJXDJH

	3DUHQWDO	1HWZRUN
		,QWHUIDFH	:LUHG
	6\VWHP	/LQN 6WDWXV	/LQN 'RZQ
		0$& $GUHVV	IE F F
6HWWLQJV		,3 0RGH	0DQXDO
	1HWZRUN	,3 $GUHVV
		6XEQHW 0DVN
	%' /LYH	*DWHZD\
		3ULPDU\ '16
	'LVSOD\	6HFRQGDU\ '16

$XGLR

4Select »IP Mode« by using »A« or »S« and press »ENTER« to confirm.

5Choose the setting (»Dynamic« or »Manual«) by using »A« or »S« and press »ENTER« to confirm.

Notes:

7The IP Mode option provides two configuration modes for IP:

–Dynamic – Enables DHCP, the addresses are automatically assigned by the router.

–Manual – Requires user to configure network settings such as IP ad-

dress, subnet mask, gateway, etc. It is able to show subnet mask, gateway, primary DNS, secondary DNS when "IP Mode" is set as "Manual".

7If you choose the option "Dynamic", go to step 11.

If you choose the option "Manual", continue with step 6).

6 Select »IP address« by using »A« or »S« and press »ENTER«.

Enter the IP address by using the number buttons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select »Cancel« by using »s« and press »ENTER« to cancel the setting.

7Select »Subnet Mask« by using »A« or »S« and press »ENTER«.

Enter the Subnet Mask by using the number buttons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select »Cancel« by using »s« and press »ENTER« to cancel the setting.

8Select »Gateway« by using »A« or »S« and press »ENTER«.

Enter the Gateway address by using the number buttons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select »Cancel« by using »s« and press »ENTER« to cancel the setting.

Note:

7The primary and secondary DNS (Domain Name System) in the next setting are the network adresses of the server allocated by the provider.

9 Select »Primary DNS« by using »A« or »S« and press »ENTER«.

Enter the Primary DNS by using the number buttons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select button »Cancel« by using »s« and press »ENTER« to cancel the setting.

ENGLISH 15

INITIAL SETUP----------------------------------------------------------------------------------------------------------------------

10 Select »Secondary DNS« by using »A« or »S« and press »ENTER«.

Enter the Secondary DNS by using the number buttons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select »Cancel« by using »s« and press »ENTER« to cancel the setting.

11 Select »Apply« by using »S« and press »ENTER« to confirm the setting;

or

select »Cancel« by using »s« and press »ENTER« to cancel the setting.

12If the connection is successful, »Network Test« appears.

End setting by using »ENTER«.

16 ENGLISH

BD/DVD PLAYBACK------------------------------------------------------------------------------------------------

This item incorporates copyright protection technology that is protected by U.S. patents and other intellectual

property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.

Special features of Blu-ray Discs

The massive storage capacity of a Blu-ray (BD) Disc allows a far higher standard of picture and audio quality and a wealth of special e ects and enhanced features.

BLU-RAY AND JAVA

This player features Java support, enabling you to get the most out of the latest Blu-ray Discs.

When a BD disc is loaded, always explore the title menu to enjoy these extra features.

BLU-RAY AND HDMI

HDMI is the only domestic medium capable of transmitting the huge volumes of data required by the very high picture resolutions and advanced digital audio codecs that make Blu-ray such an exciting medium.

PLAYING A BLU-RAY DISC

Blu-ray Discs play very much like standard DVDs but with a very much higher level of interactivity. All the standard features of DVD player operate exactly the same but there are some di erences.

Special features of the DVD

You can recognise a DVD by the logo on the label.

The discs have one or more tracks depending

on the content of the DVD.

Each track can contain one or more chapter. Selecting the track and chapter is simple and convenient.

You can control and direct playback of a DVD using the menu of the DVD player on the television screen.

Preparation

1 Switch on the LED/LCD TV, select the input setting on the LED/LCD TV that matches the connection method you used to connect the Blu-ray player.

2 If an audio system or an AV receiver is connected to the Blu-ray player, switch it on and select the audio input for the Blu-ray player.

3 Switch on the Blu-ray player.

Ð If there is no disc in the compartment, ÈNO DISCÇ appears after a short time.

ÐIf a disc has been inserted, it is scanned and ÈLOADÇ appears.

Inserting the disc

1Press ÈÇ to open the disc compartment.

ÐDisplay: ÈOPENÇ.

2Insert the disc in the compartment with its label facing upwards.

3Press ÈÇ to close the disc compartment.

ÐDisplay: ÈCLOSEÇ and then ÈLOADÇ; the disc is scanned and then the total duration of the disc is shown.

ÐThe disc menu opens automatically.

Note:

7Some disc menus direct you to set the menu language first. If that happens, select the language by using cursor buttons and press ÈENTERÇ.

ENGLISH 17

BD/DVD PLAYBACK------------------------------------------------------------------------------------------------

Playback

1Select ÈPlayÇ if this option is available by using the cursor buttons and press ÈENTERÇ;

or

press ÈÇ to start playback. Ð The playback starts.

Note:

7If the message ÈProhibitedÇ appears on the television screen, the selected function is not possible with this disc.

2Press ÈÇ to pause playback (freeze frame).

3Press ÈÇ to resume playback.

4Press È7Ç to interrupt playback.

5Press ÈÇ to resume normal playback.

6To stop playback, press È7Ç twice.

Removing the disc

1Press ÈÇ to open the disc compartment.

2Remove the disc from the compartment.

3Press ÈÇ to close the disc compartment.

Adjusting the volume

1Adjust the volume by pressing È– VOLUME Ç or È VOLUME +Ç on the remote control.

Muting

1Activate the mute with ÈMUTEÇ on the remote control.

ÐDisplay: ÈX O Ç.

2Deactivate the mute with È MUTE Ç on the remote control.

ÐDisplay: ÈOnÇ.

Additional playback functions

Viewing information

You can view information about the title, chapter, playing time and much more on the screen.

1Press ÈOSDÇ on the on the remote control.

ÐDisplay: The information line appears.

2Press ÈOSDÇ on the on the remote control to deactivate the function.

ÐDisplay: The information line disappears.

Disc menu navigation

The disc may contain several titles and chapters you can choose from.

1Press ÈDISC MENUÇ on the remote control. Ð Main menu of the disc opens.

2Select the title that you want by using the cursor buttons and press ÈENTERÇ to conÞrm.

3In the selected title, choose the chapter or part that you want by using the cursor buttons and press ÈENTERÇ to conÞrm.

4Press ÈDISC MENUÇ on the remote control to return to the main menu of the disc.

Fast forward and fast reverse

1During playback, press È3Ç on the remote control to fast reverse,

or press È4Ç on the remote control to fast forward through the disc.

Note:

7When you repeatedly press the button, each time the fast forward or fast reverse motion speed changes. The speed increases through the following sequence: Fast x 2, Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64, Fast x 128.

2Press ÈÇ to resume normal playback. Ð Playback continues.

18 ENGLISH

BD/DVD PLAYBACK------------------------------------------------------------------------------------------------

Selecting previous and next chapters

1 During playback, press ÈÇ to play the previous chapter or press ÈÇ to play the next chapter.

ÐWhen you release the button, the device skips the current chapter and playback starts from the selected chapter.

Search functions

1 Press ÈSEARCHÇ repeatedly to switch between search modes: ÈGoto TitleÇ, ÈGoto ChapterÇ and ÈGoto TimeÇ.

2 In the selected mode, press number buttons and ÈENTERÇ button to select the point you want to play.

Note:

7For example to select title 4, you should press respectively the buttons È0Ç, È0Ç, È0Ç, È4Ç, ÈENTERÇ.

Ð Playback of the selected point starts au-

tomatically.

Enlarging or reducing the picture

(only DVD)

1Press ÈZOOMÇ repeatedly to switch between ÈZoom O Ç, ÈZoomx2 Ç and ÈZoomx4Ç.

ÐDisplay: È Zoom x2 Ç, the selected part of the picture is enlarged 2 times.

ÐDisplay: È Zoom x4 Ç, the selected part of the picture is enlarged 4 times.

Note:

7You can move the picture with ÈaÇ, ÈsÇ, ÈAÇ or ÈSÇ on the screen.

2To quit the function, press again ÈZOOMÇ

until ÈZoom O Ç appears on display. Ð Display: ÈZoom O Ç.

Frame-by-frame playback

1During playback, press È!8Ç to advance the scene frame by frame.

2Press ÈÇto resume playback.

Repeating a chapter or a track

(controlled by the Blu-ray Disc)

1During playback, press ÈREPEATÇ repeatedly to select a repeat mode: ÈRepeat TitleÇ, ÈRepeat ChapterÇ, ÈRepeat O Ç.

ÐDisplay: È Repeat TitleÇ, the current title is repeated.

ÐDisplay: È Repeat ChapterÇ, the current chapter is repeated.

2To quit the function, press again ÈREPEATÇ until ÈRepeat O Ç appears on display.

ÐDisplay: È Repeat O Ç.

Repeating a selected section

(controlled by the Blu-ray Disc)

1During playback, press ÈA-BÇ to select a start point for a section to be repeated.

ÐDisplay: È Repeat A-Ç, the start point of the section is selected.

2At the point you want to be the end point, press ÈA-B Ç again to set the end point for the section to be repeated.

ÐDisplay: È Repeat A-BÇ, the end point of the section is selected. The selected section starts to be repeated.

3To quit the function, press again ÈA-BÇ until ÈRepeat O Ç appears on display.

ÐDisplay: È Repeat O Ç.

Selecting and displaying subtitles

If the disc provides subtitles, they can be displayed on your TV screen.

If the subtitles are available in several languages, you can select the one you want.

1During playback, press ÈSUBTITLEÇ on the remote control.

Ð ÈSubtitleÇ and ÈPIP SubtitleÇ menu appears.

2Select the Subtitle menu that you want by using the cursor buttons and press ÈENTERÇ to conÞrm.

ENGLISH 19

BD/ DVD PLAYBACK----------------------------------------------------------------------------------------------

3In the selected Subtitle menu, select the options that you want by using the cursor buttons and press ÈENTERÇ to conÞrm.

Ð Display: for example È 01/02 DEUÇ.

4To switch of the subtitles, select ÈSubtitle O Ç at step 3 by using the cursor buttons and press ÈENTERÇ to conÞrm.

Notes:

7You can set the subtitle from the disc menu also. Please see "Disc menu navigation" section.

7While playing video Þles from a USB or an optical disc, to clearly obtain all the characters in subtitles, the subtitle Þle must be in UTF-8 format. The name of the video Þle and the subtitle Þle should be the same.

In order to prepare UTF-8 format, you should do the following method:

1Open the .srt Þle in the NotePad application.

2Go to the "File" drop-down menu and select "Save As...".

3The Þle name and Þle type will remain the same.

4Under the Encoding section of this window, select the "UTF-8" option from the drop-down menu.

5Click "Save" to keep your changes.

Selecting the dubbed language or the audio format

These settings allow you to listen to a dubbed language other than the default one if the disc provides alternatives.

1 During playback, press ÈAUDIOÇ on the remote control.

Ð ÈAudioÇ and ÈPIP AudioÇ menu appears.

2Select the dubbed language that you want by using the cursor buttons and press ÈENTERÇ to conÞrm.

Pop-up menu/Title menu

If the disc provides pop-up or title menus, you can use this function.

20 ENGLISH

1During playback, press ÈPOPUP MENU/ TITLE MENUÇ to open pop-up or title menu.

2Select the option that you want by using the cursor buttons and press ÈENTERÇ to conÞrm.

3To quit the function, press ÈPOPUP MENU/ TITLE MENUÇ again.

Selecting the camera angle for particular scenes or passages

Some discs provide scenes or passages which were Þlmed several times from di erent camera angles.

1 During playback, press ÈANGLEÇ on the remote control.

Ð Angle menu appears.

2 Select the angle that you want by using the cursor buttons and press ÈENTERÇ to conÞrm. Ð Display: for example È01/03Ç.

Playing secondary video (Picture in

picture / PIP)

(controlled by the Blu-ray Disc)

1 During playback, press ÈPIPÇ on the remote control to turn on secondary video (picture in picture / PIP) function.

ÐThe secondary video playback appears on display.

2 To quit function press ÈPIPÇ again.

Selecting the dubbed language for

the PIP function

(controlled by the Blu-ray Disc)

1During PIP playback, press ÈSECONDARY AUDIOÇ on the remote control.

Ð The secondary audio menu opens.

2Select ÈOnÇ or ÈO Ç by using the cursor buttons and press ÈENTERÇ to conÞrm.

Using the color buttons

The RED, GREEN, YELLOW and BLUE buttons are used with interactive menus when operating a BD-Video disc that includes JavaTM applications (BD-J). For more information about operating this kind of a disc, please read the instructions that came with the disc.

BD LIVE ---------------------------------------------------------------------------------------------------------------------------------------------

Some Blu-ray discs contain additional features that are made available to players that are connected to the internet, and have additional memory added.

Setting up the player for BD-Live internet access

1 Press »SETUP« to open the main menu.

These additional features may include things like:

–the ability to download new movie trailers,

–additional "commentary" by actors and directors,

–multiperson game play and chat.

In order to access BD-Live functions, the player must be properly configured for BD-Live internet access, and it must be equipped with additional memory.

2 In the main menu select »Settings« by using »A« or »S« and press »ENTER« to confirm.

3Select »BD-Live« by using »A« or »S« and press »ENTER« to confirm.

4Select »BD-Live Internet Access« by using »A« or »S« and press »ENTER« to confirm. Make sure that the option »Limit Access« or »Always Allow Access« is selected.

Adding BD-Live memory to the player

1 Insert an at least 1Gbyte USB memory stick into a PC drive, and make sure that it is formatted as FAT32.

2Insert the USB plug of the USB memory stick in

the »« socket on the device (see "CONNECTION AND PREPARATION" section).

5Select »Limit Access« or »Always Allow Access« by using »A« or »S« and press »ENTER« to confirm.

Note:

7Once the USB memory stick has been inserted, if there is not at least 100 Mbyte of free space on the device, you should choose »Erase Blu-ray Storage« from the »BD-Live« setup menu item.

6 Press »RETURN« and select »Network« by using »A« or »S« and press »ENTER« to confirm.

Select »Network Test« by using the cursor buttons and press »ENTER« to confirm.

Note:

7The "Link Status" must show that you are connected to the internet, otherwise you cannot access BD-Live content on the web (see "CONNECTION AND PREPARATION/ Connecting to the internet with ethernet cable" section).

7 Press »RETURN« to return to the main menu.

ENGLISH 21

BD LIVE ---------------------------------------------------------------------------------------------------------------------------------------------

Using BD-Live

1Press »« to open the disc compartment.

2Insert the Blu-ray Disc in the compartment with its label facing upwards.

3Press »« to close the disc compartment.

4Press »« to start playback.

5During playback, press »POPUP MENU/ TITLE MENU« to open the pop-up or title menu.

6Select »BD LIVE« by using »A«, »S«, »a« or »s« and press »ENTER« to confirm.

–In a few minutes, the BD-Live Menu appears.

7Select the content to download from the »Previews« sub menu. The download is depending on the content size and network speed.

–The downloaded content is stored under »Media« – »USB« on the external USB memory stick. You can choose to either playback or delete the downloaded content.

BD-Live notes

7The Broadcom Reference system only supports the connection of USB memory in order to fulfill the BD 2.0 1GByte memory requirement.

7You must have the BD-Live disc in the player to play any related (already downloaded) content.

7Some BD-Live content could expire and will not play. You may need to manually delete the contents in storage in order to have free space. To do this, select respectively: »Settings«, »BDLive«, »Erase Blu-ray Storage«.

7A clock is not used to manage the expiration of downloaded BD-live content. Instead, time and expiration of content is managed by the BD-Live server on the internet.

22 ENGLISH

PLAYING AUDIO/VIDEO FILES--------------------------------------------------------

Playing the contents of a data device or a USB memory stick

Preparation

1Switch o the Blu-ray player with È8Ç.

2Connect a data device to the ÈÇ socket using a standard USB cable;

or

insert the USB plug of the USB memory stick in the ÈÇ socket on the device.

3Switch on the LED/LCD-TV, select the input setting on the TV that matches the connection method you used to connect the Blu-ray player.

4Switch on the Blu-ray player with È8Ç.

5Press ÈSETUPÇ to open the main menu.

6Select ÈMediaÇ by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

Ð The external device menu opens.

9LGHRV

0HGLD

86%

0XVLF

3LFWXUH

7ConÞrm ÈUSBÇ with ÈENTERÇ; or

select ÈUSBÇ (if a disc is inserted Ð display ÈOptical DiscÇ) by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

Playing a title, a track or a picture

1 Select ÈVideosÇ, ÈMusicÇ or ÈPicturesÇ by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

2 Chose the Þle from the selected option by using ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

3Press ÈÇ to start playback.

Ð The selected file starts playing.

)LOH VRQJ PS 7LWOH &RRO 7UDFN

$UWLVW 5LFDUGR )XQLFFLR $OEXP 'HDG 'X[

2II

2II

3OD\

4 To stop playback, press È7Ç.

Additional playback functions

7Press ÈÇ to pause playback.

Press ÈÇ again to resume playback.

7Select the playback speed during playback by pressing È3Ç or È4Ç.

7During playback, select the next track/picture

you want with ÈÇ or select the previous track/picture with ÈÇ.

7During playback, press ÈREPEATÇ repeatedly to select a repeat/random mode:

ÐÈRepeat AllÇ,

ÐÈRandom OnÇ,

ÐÈRepeat FileÇ,

ÐÈRepeat O Ç.

7While playing back the picture, to enlarge the picture press ÈENTERÇ repeatedly.

Move the picture with ÈAÇ, ÈSÇ, ÈaÇ or ÈsÇ on the screen.

7To set slide show effects and slide show delay for pictures:

press ÈPOPUP MENU TITLE MENUÇ, select ÈSlide Show E ectsÇ or ÈSlide Show DelayÇ with ÈAÇ or ÈSÇ, press ÈENTERÇ to conÞrm, select the required e ect or the delay with ÈAÇ or ÈSÇ and press ÈENTERÇ to conÞrm.

ENGLISH 23