Fisher & Paykel RX628DW, RX628DX, RX611DUX User Manual
INSTALLATION INSTRUCTIONS
USER GUIDE
Side by side refrigerator
RX611DUX, RX628DX
and RX628DW models
NZ AU GB IE
CONTENTS
Introduction 2
Safety and warnings 3
Installation instructions 7
Moving and storing your appliance 15
About your refrigerator – Ice & Water 16
About your refrigerator – Non Ice & Water 17
Operating instructions – Ice & Water control panel 18
Operating instructions – Non Ice & Water control panel 22
Using your water dispenser / Ice maker – Ice & Water 25
Special features 27
Cleaning Care – Exterior 28
Cleaning Care – Interior 29
Storing food in your refrigerator 30
Storing food in your freezer 32
Troubleshooting 34
Product Fiche 38
Manufacturer’s Warranty 39
Customer Care 41
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this user guide may not be available in all markets and are
subject to change at any time. For current details about model and specification
availability in your country, please go to our website www.fisherpaykel.com or contact
your local Fisher & Paykel dealer.
Note that the word “refrigerator”refers to combination refrigerator/freezer products.
1
INTRODUCTION
Thank you for buying a Fisher & Paykel side by side refrigerator.
This refrigerator combines size and storage space with the latest features and functions.
Many hours have been spent researching how you, our customer, use your refrigerator
and what we can do to make life easier for you.
As your life changes, so can your refrigerator. This book explains the features and
functions, and will help you get the most out of your refrigerator.
We hope you enjoy your new side by side refrigerator.
RX611DUX RX628DW/RX628DX
2
SAFETY AND WARNINGS
!
WARNING!
Electric Shock Hazard
Read and follow the safety and warnings
outlined in this user guide before operating
this appliance.
Failure to do so can result in death, electric
shock, fire or injury to persons.
This refrigerator contains flammable
refrigerant Isobutane (R600a).
R600a
Use this appliance only for its intended purpose as
described in this user guide.
IMPORTANT SAFETY INSTRUCTIONS
WARNING! When using this appliance always exercise
basic safety precautions including the following:
• This appliance is not intended for use by persons
(including children under the age of 8 years) with
reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
• Young children should be supervised to ensure they
do not play with the appliance.
• The manufacturer’s installation instructions for
product and cabinetry ventilation must be followed
when installing the appliance.
• Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
3
SAFETY AND WARNINGS
• Do not use mechanical devices or other means to
accelerate the defrosting process.
• Do not damage the refrigerant circuit.
• In case of damage to the refrigerant circuit, ventilate
the area by opening all windows. Do not operate
electrical equipment or any other equipment that may
produce arcs, sparks or flames in the area. Contact
your Fisher & Paykel Authorised Repairer immediately
to arrange for the appliance to be repaired.
• It is hazardous for anyone other than an authorised
service person to service this appliance. In
Queensland the authorised service person must hold
a gas work licence or authorisation for hydrocarbon
refrigerants to carry our service or repairs which
involve removal of covers.
Electrical
• This appliance must be installed in accordance with
the installation instructions beforeuse.
• Never unplug your refrigerator by pulling on the
power cord.
• Always grip the plug firmly and pull straight out from
the outlet.
• Do not plug in any other appliance at the same
power point as your refrigerator or use extension
cords or double adapters.
• Repair or replace immediately all electric service
cords that have become frayed or otherwise damaged.
Do not use a cord that shows cracks or abrasion along
its length or at either the plug or appliance end.
• If the power supply cord is damaged, it must only be
replaced by your Fisher & Paykel Authorised Repairer
because special purpose tools are required.
4
SAFETY AND WARNINGS
• When moving your appliance away from the wall, be
careful not to roll over or damage the power cord.
• Do not use electrical appliances inside the food
storage compartments of the appliance.
IMPORTANT!
Your refrigerator is designed to operate for many
years without the need for service checks. However,
if your refrigerator is malfunctioning, have it
attended to by your Fisher & Paykel Authorised
Repairer as soon as possible. All electrical repairs
must be carried out by an adequately trained service
technician or qualified electrician.
Cleaning
Many commercially available cleaning products
contain solvents which may attack plastic
components of your refrigerator and cause them to
crack. Please refer to the cleaning care section of
this booklet for further advice.
Disposal
Extreme care must be taken when disposing of your
old appliance to avoid hazards:
– The flammable refrigerant gas must be safely
removed.
– The thermal insulation foam contained in this
appliance is produced by flammable insulation
blowing gases, any exposed foam may be highly
flammable and must be carefully treated during
disposal.
– The doors should be removed and the shelves
left in place so that children may not easily
climb inside.
5
SAFETY AND WARNINGS
• Your Fisher & Paykel Authorised Repairer will be able
to give advice on environmentally friendly methods
of disposing of your old refrigerator or freezer.
Storing food and drinks
• Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
• Never store volatile or flammable materials in your
refrigerator as they may explode.
• Never freeze liquids in glass containers. Liquid
expands during freezing, which may cause the
container to explode.
• Never freeze carbonated drinks. They may explode.
• Do not consume food if it is too cold. Food removed
from the freezer compartment may be cold enough
to cause damage when brought into contact with
bare skin, egfrozen ice cubes.
Power failure – food safety
• Do not refreeze frozen foods that have thawed
completely. The food may be dangerous to eat.
Follow the recommendations below if you discover
food in your freezer has thawed:
– Ice crystals still visible – food may be refrozen
but should be stored for a shorter period than
recommended.
– Thawed but refrigerator cold – refreezing
generally not recommended. Fruits and some
cooked food can be refrozen but use as soon as
possible. Meat, fish, poultry – use immediately or
cook then refreeze. Vegetables – discard as they
usually go limp and soggy.
– Thawed and warmer than 5°C – discard all food.
6
INSTALLATION INSTRUCTIONS
Please follow the installation steps below to ensure your appliance operates correctly.
Power
The appliance must be installed so the plug is accessible.
To ensure that the appliance is not accidentally switched off, connect your refrigerator
to its own power point. Do not plug in any other appliance at this power point or use
extension cords or double adaptors, as the combined weight of both power cords can pull
a double adaptor from the wall outlet socket.
For power requirements, refer to the information on the serial plate located on the left
hand side of the fridge compartment.
It is essential that the appliance is properly grounded (earthed).
Connect the appliance to the electrical supply (220-240 V~50 Hz) with the plug and lead,
which are fitted.
Connections to the mains supply should be in accordance with local regulations.
Location
Your refrigerator should not be located in direct sunlight or next to any heat generating
appliance such as a cooktop, oven or dishwasher.
This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
Ice & Water (Ice & Water models only)
Your Ice & Water refrigerator must be installed by an authorised plumber or
Fisher&Paykel Authorised Repairer as incorrect plumbing can lead to water leaks.
Fisher & Paykel Appliances does not accept responsibility for damage (including water
damage) caused by faulty installation or plumbing.
7
INSTALLATION INSTRUCTIONS
PLAN VIEW
FLUSH WITH REFRIGERATOR CHASSIS – FULL ROTATION
H
G G
E
F
J
I
PLAN VIEW
FLUSH WITH REFRIGERATOR CHASSIS – FULL ROTATION
Product and cabinetry dimensions
D A
F
G G
J
E
I
B
c
PRODUCT DIMENSIONS mm
Overall height of product
A
(to top of hinge)
Overall width of product 910
B
Overall depth of product
C
(excludes handle, includes rear cover)
CABINETRY DIMENSIONS
Inside height of cavity 1845
D
Flush with refrigerator chassis – full door rotation
Inside width 941
E
Inside depth 635
F
MINIMUM CLEARANCES
Side clearance 20
G
Rear clearance 30
H
Door clearance - hinge side flush with chassis – full rotation 460
I
Door clearance - hinge side flush with chassis – full rotation
J
(Small Door)
1795
700
365
8
INSTALLATION INSTRUCTIONS
50 mm
30 mm
Positioning your appliance
Choosing the right location
This appliance should be installed in
a room that is dry and well ventilated.
To provide adequate ventilation,
make sure the refrigerator is at least
20mm clear on all sides from kitchen
cabinetry, and 30mm from the back
wall. Any units placed above the
appliance must be clear by 50mm to
allow sufficient ventilation.
If locating the refrigerator close to a
corner, sufficient spacing must be left
for opening the doors and removing
the shelves.
This appliance should be at least
100mm from any electric or gas
cooker. If this is not possible, make
sure that appropriate insulation is used
(eg insulated wall).
Avoid exposing the appliance to direct
sunlight, and sources of heat (such as
radiators, heaters or cookers).
Locating this appliance in a cold
environment (such as a shed, outhouse
or garage) may compromise its
performance. A consistent room
temperature of 10°C or above is
recommended to ensure optimum
performance and food care.
50 mm
30 mm
Installation distance
30 mm
20 mm
Door rotation installation distance
9
INSTALLATION INSTRUCTIONS
ArtNo.600-0048 -
DxD water connect
ArtNo.600-0048 -
DxD water connect
ArtNo.600-0048 -
DxD water connect
Removing and installing the doors
IMPORTANT!
In the event that you need to remove the refrigerator doors, please follow the door
removal and installation instructions below.
It is suggested for your safety to have two or more people to assist you in completing
the tasks below to avoid injury, product damage or property loss.
Ensure both power and water to the refrigerator are turned off.
First step to removing fridge and freezer door
1 Undo the 2screws holding kick-strip in position and remove (Fig.1).
2 Release the water coupler: press and hold in the collet as shown (Fig.2) and remove the
water tube.
Kick-strip
(Doors omitted for clarity)
Fig. 2 Releasing water couplerFig. 1 Removing kick-strip
The freezer door
1 Undo the hinge cover screw and remove the cover (Fig.3), the clips holding the cover
must be released first. Unclip the front section of the hinge cover, then push the cover
towards the centre of the appliance and pull upwards to release.
2 Disconnect wires held together with clips (Fig.3).
3 Undo the screws holding down hinge bracket. Do not disconnect the earth wire from the
screw (Fig.4).
4 Lift freezer door and thread the water tube up through the lower hinge.
5 Pull the door up and then away from the cabinet.
Hinge cover
Fig. 3 Removing hinge cover
10
Fig. 4 Removing hinge screws
INSTALLATION INSTRUCTIONS
ArtNo.600-0048 -
DxD water connect
ArtNo.600-0048 -
DxD water connect
The fridge door
1 Undo the hinge cover screw and remove the cover (Fig. 5), the clips holding the cover
must be released first. Unclip the front section of the hinge cover, then push the cover
towards the centre of the appliance and pull upwards to release.
2 Undo screws holding down the hinge bracket (Fig. 6).
3 Pull the door up and then away from the cabinet.
Hinge cover
Fig. 5 Removing hinge cover
Fig. 6 Removing hinge screws
Refitting the doors
Refit the doors by reversing the removal steps. It is essential that when you replace the
freezer door you replace the earth wire.
11
INSTALLATION INSTRUCTIONS
ArtNo.600-0035 - Adjust
Fig.4-10
Fig.4-11
Fig.4-9
ArtNo.600-0035 - Adjust
Fig.4-10
Fig.4-9
Fig.4-10
Levelling the refrigerator and
adjusting the doors
Make sure that the appliance is on
solid level flooring. If the refrigerator
is placed on a plinth, the plinth must
be flat and constructed from strong,
fire resistant materials.
The refrigerator may require some
alignment before connecting to the
power supply.
This refrigerator has front adjustable
feet, which can be used to level the
appliance.
Insert a suitable flat-head
screwdriver into the slots of the
adjustable feet. Wind to the left to
raise the foot and to the right to
lower the foot.
Levelling the doors
To raise the left-hand door wind
the left-hand foot to the left.
To raise the right-hand door, wind
the right-hand foot to the left.
Clockwise to raise feet
Levelling doors
Counter-clockwise to
lower feet.
12
INSTALLATION INSTRUCTIONS
Water supply connection
IMPORTANT!
It is recommended to have this product installed by a qualified technician.
DO NOT use with water that is microbiologically unsafe or of unknown quality.
WARNING – connect to potable water supply only to ensure water hygiene in the
icemaker and water dispenser.
DO NOT install on line pressure above above 125 PSI (860kPa) or below 4.5 PSI
(30kPa).
DO NOT use on hot water supply. Maximum temperature 38°C (100°F)
DO NOT cut any length of tube shorter than 500mm.
DO NOT install near electrical wires or water pipes that will be in the path of drilling
when selecting the location of the filter system.
DO NOT mount the filter in such a position that it will be struck by other items, such
as wastebaskets, etc.
DO NOT install the filter or any water tubing in direct sunlight as prolonged exposure
to light can weaken plastic components.
DO NOT install the filter in a location that is susceptible to freezing temperatures as
damage to the filter housing could occur.
DO NOT screw the filter to the refrigerator.
DO NOT install the filter or any water tubing in high temperature areas eg in a ceiling
cavity.
AVOID contamination of pipes during installation.
DO NOT use copper tubing. The plastic tubing supplied should always be used.
DO NOT continuously dispense water for a period longer than 1 minute.
The water connection instructions are intended for a professional installer.
13
Loading...