Feiyutech WG Mini User Manual
FY WG Mini 2 Axis Wearable Gimbal is compatible with GoPro HERO4 / 3+ / 3 and
cameras with similar dimensions. Reserved mounting space for GoPro LCD Touch
BacPac
Manual Version 1.0
Introduction
FY WG
Mini
1
with GoPro HERO4/ 3+/ 3 (with optional mounting space for GoPro LCD BacPac) and other cameras with similar dimensions.
The FY WG
form factor for action cameras. A GoPro T-Clamp adapter is packaged with every FY WG
supporting the GoPro three-prong mount. The FY WG
mounted in different orientations to all universal tripod screw mount accessories (including helmets, bikes,
selfie sticks and other accessories).
is a lightweight, yet feature-rich, wearable 2 axis gimbal capable of capturing immersive and fully stabilized footages. It is compatible
Mini
is a miniaturized version of the best-selling FeiYu gimbal, offering exceptional stabilization technology in a wearable
Mini
also contains two 1/4"-20 tripod mounts on its gimbal body, allowing the gimbal to be
Mini
. Users can attach the gimbal to any accessories
Install
2
STEP 1
Remove the screws on the
battery compartment,
insert two16340 batteries
and tighten the screws.
WARNING !WARNING !
!
Do not power on the
Do not power on the
gimbal before completing
gimbal before completing
all the installation steps.
all the installation steps.
STEP 2
Mount the camera carefully
to the mounting bracket
and tighten the screws.
Forward
Accessories for
1/4 inch screws
Hexagonal socket
head cap screw
STEP 3
Please choose one installing way:
1
Remove the L-clamp, use the 3M Adhesive to fix the bottom of
the Gimbal.
2
Use with GoPro Accessories, mount the provided T-clamp
to the side or the bottom of the gimbal. Attach T-clamp to any
3
accessories supporting the standard GoPro three-prong
mount.
The gimbal can also be mounted directly to other accessories
using the standard 1/4" tripod mount. Tighten all screws and
ensure it is mounted firmly before using the gimbal.
Vertical
Operation
3
Function
Function
Button
Button
Switch between different operating modes by pressing the function button.
The LED light will flash distinctively to indicate different operating modes.
3
2
1
T-clamp
POWERING ON / OFF
Power on: Ensure the camera
is mounted securely, then hold
down the function button for 2
seconds to turn on the gimbal.
Power off: Hold down the
function button for 3 seconds
to turn off the gimbal.
3M
adhesive
WARNING !
Do not power on the gimbal before
completing all the installation steps
Tilting
Function
Button
ON
/
OFF
（
Screws For
The Battery
Compartment
）
Video And Camera
Charging Interface
1/4 Inch Screw Hole
T-Clamp Screw Hole
Tilting Axis
Function
Interface
Panning
Axis
Operating Modes and Functions
Operating Modes and Functions
Mode #1 - Tilng Mode
Mode #2 - Lock Mode
Manual Pulling Locking
can be adjusted manually in the Lock Mode. Adjust the titl angle to the desired position and wait for
0.5 second until the gimbal registers the new angle.
Camera is permitted to tilting up or down. Panning is restricted.
Camera stays in its current orientation. All panning are restricted.
After the gimbal has been powered on for eight seconds, the tilt angle
Function Button Quick Reference
Operation LED Status Function
Single Tap
Long Press
For 1 Second
LED Flashes Once
On Constantly Lock Mode
Tilting Mode
Operation LED Status FunctionSound
Long Press
For 2 Second
Long Press
For 3 Second
Accessories
4
Hexagonal
Socket Head
Cap Screw
M2*6mm
Charger
Input: DC 5V
Output: DC 4.2V
Rechargeable
Battery
Type: 16340
Video Output
and Camera
Charging Cable
USB CableUSB Connector
Turn On And Switch To
The Mode’s LED Status
Turn Off After
A moment
Curved Adhesive
Mounts
Two Beeps
Three Beeps Shutdown
Long screwM 1.5 Allen Key T-Clamp
Quick-Release
Buckle
Power On
Extension Knurled
Thumb Screw
3M Adhesive
Panning
T-Clamp
Screw Hole
1/4 Inch
Screw Hole
How to Charging
USB Cable
T-Clamp
Screw Hole
5V USB Power
Adapter
（Not Included）
Firmware Upgrade
5
Be sure to insert the
!
batteries before upgrading
Function
Interface
Firmware Upgrade Instruction
Please visit the official website of Feiyu Tech: www.feiyu-tech.com to download the USB driver, firmware upgrade software and the latest firmware.
Unzip the compressed file locally to your computer. Refer to the connection diagram on how to connect the gimbal with the computer. Please
follow the instructions in the firmware upgrade package carefully, otherwise the Gimbal can not work normally.
Attention : Please make sure that the connection to the computer is done by the USB connector.
Video And Camera Charging Interface
6
USB Cable
!
WARNING
Make sure that the
connection to the
computer is done by the
USB Connector
Upgrade........
PC
This interface can be output 5 voltage and receive
analog video signal from GoPro
Connect the video output and camera charging cable
as the above diagramcan power the GoPro camera and
view video signal from the GoPro camera.
Initialize The Gimbal
7
FY WG Mini needs to be initialized whenever the
following situations are observed after power on
1. The tilt angle is not leveled with the horizontal
surface.
2. When the gimbal is stationary, the camera
does not stay stationary.
Parameters
8
Function
Interface
After connecting the video output and camera charging
cable, the analog monitor can be used as a display.
Note: The Analog Monitor are equipped by users.
Video Output Cable
( Equipped By Users )
Initialization Instructions
1. Ensure gimbal is fully assembled and camera is installed properly.
2. Place the gimbal on a flat surface and keep it stationary.
3. Power on the Gimbal.
4. Wait for the gimbal to finish its initialization before resuming the
use of the gimbal.
Analog Monitor
( Equipped By Users )
Motionless Flat Surface
66 mm
90 mm
95 mm
35.5 mm
DISCLAIMER
FY WG Mini 2-Axis Wearable Gimbal is a feature-rich camera stabilizer, yet lightweight and portable.
It is prohibited for any user to use the gimbal for any illegal purposes.
Guilin Feiyu Electronic Technology Co.,Ltd and our associates assume no liability for any accident, injury, death,
loss, or other claim related to or resulting from the use of this product. In no event shall Guilin Feiyu Electronic
Technology Co.,Ltd and our associates be liable for incidental or consequential damages relating to or resulting
from the use of this product or any of its parts. Damage resulting from use, accident, or normal wear and tear is
not covered by our warranty. Guilin Feiyu Electronic Technology Co.,Ltd reserves the right to amend this manual
and the terms and conditions of this product at any time.
320°Vertical Tilting Angle
Horizontal Panning Angle
Panning Increments
Usage Time 3 ~ 4 Hours
Camera Maximum Height
Camera Maximum Thickness
Weight
320°
3°/S ~ 150°/S
43.6 mm ( Replaceable mounting bracket )
31.7 mm ( Replaceable mounting bracket )
146.5g ( Without batteries & camera )
ATTENTION
▲ Please assemble the gimbal in accordance to the diagram provided.
▲ Please upgrade the firmware with the provided USB data cable and
USB connector.
▲ Please charge the battery with the provided battery charger.
▲ Please install the camera securely before powering on the gimbal.
Loading...