DELLTM PowerVaultTM DL Backup-to-Disk Appliance
Powered by CommVaultTM SimpanaTM
Configuring the Dell™ EqualLogic™ PS Series Array as a Backup Target
A Dell Technical White Paper by
Dell Engineering
Configuring a Dell™ EqualLogic™ PS Series Array as a Backup Target for CommVault™ Simpana™
THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY KIND.
© 2010 Dell Inc. All rights reserved. Reproduction of this material in any manner whatsoever without the express written permission of Dell Inc. is strictly forbidden. For more information, contact Dell.
Dell, the DELL logo, and the DELL badge, PowerConnect, and PowerVault are trademarks of Dell Inc. CommVault, CommCell, Simpana, and CommServe and the CommVault logo are trademarks or registered trademarks of CommVault Corporation or its affiliates in the US and other countries.
Microsoft, Windows, Windows Server, and Active Directory are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Page ii
Configuring a Dell™ EqualLogic™ PS Series Array as a Backup Target for CommVault™ Simpana™ |
|
Table of Contents |
|
Executive Summary .................................................................................................. |
2 |
Introduction ........................................................................................................... |
2 |
Prerequisites .......................................................................................................... |
3 |
Technical Resources ................................................................................................. |
3 |
Configuration Settings ............................................................................................... |
3 |
Exposing the EqualLogic volumes to the DL Backup to Disk Appliance.................................... |
4 |
Figure 1: ACL Entries for the EqualLogic Volumes............................................................ |
4 |
Configuring iSCSI settings on the DL Backup to Disk appliance............................................. |
5 |
Figure 2: Logging on to the EqualLogic Targets............................................................... |
6 |
Backing up data on a Protected Server’s EqualLogic backend storage.................................... |
6 |
Figure 3: VDS/VSS Access in Group Configuration ............................................................ |
7 |
Figure 4: Snapshot Reserve Space for a Volume .............................................................. |
8 |
Conclusions ............................................................................................................ |
8 |
Page 1
Loading...