Installation Manual
HMB57152UC, HMB50152UC, HMB50162UC
Table of Contents |
|
Safety Definitions .......................................................... |
2 |
IMPORTANT SAFETY INSTRUCTIONS ........................ |
3 |
Appliance Handling Safety ................................................. |
3 |
Safety Codes and Standards ............................................. |
3 |
Electric Safety ....................................................................... |
3 |
Microwave Safety ................................................................. |
3 |
GROUNDING INSTRUCTIONS .......................................... |
4 |
Related Equipment Safety .................................................. |
4 |
State of California Proposition 65 Warnings ................... |
4 |
Before you begin ........................................................... |
5 |
Tools and parts needed ...................................................... |
5 |
Parts included ....................................................................... |
5 |
Power Requirements ........................................................... |
5 |
Checklist for Installation ............................................... |
5 |
Removing Packaging .................................................... |
5 |
Dimensions and Cabinet Requirements ..................... |
6 |
General Cabinet Requirements ......................................... |
6 |
Outlet Area ............................................................................ |
6 |
Dimensions for 30” Wall-Mounted Units ......................... |
6 |
Dimensions for 27” Wall-Mounted Units ......................... |
7 |
Electrical Installation .................................................... |
8 |
Install Appliance ............................................................ |
8 |
Mount to Cabinet .................................................................. |
8 |
Testing Operation .......................................................... |
8 |
Bosch® Support ............................................................. |
9 |
Before Calling Service ......................................................... |
9 |
Data Plate .............................................................................. |
9 |
Service ................................................................................... |
9 |
Parts and Accessories ........................................................ |
9 |
4XHVWLRQV"
ZZZ ERVFK KRPH FRP
0DLQ 6WUHHW 6XLWH ,UYLQH &$
:H ORRN IRUZDUG WR KHDULQJ IURP \RX
This indicates that death or serious injuries may occur as a result of non-observance of this warning.
This indicates that minor or moderate injuries may occur as a result of non-observance of this warning.
Note: This alerts you to important information and/or tips.
2
INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE APPLIANCE AFTER INSTALLATION IS COMPLETE.
IMPORTANT: SAVE THESE INSTRUCTIONS FOR THE LOCAL ELECTRICAL INSPECTOR'S USE.
If the information in this manual is not followed exactly, fire or shock may result causing property damage or personal injury.
Do not repair, replace or remove any part of the appliance unless specifically recommended in the manuals. Improper installation, service or maintenance can cause injury or property damage. Refer to this manual for guidance. All other servicing should be done by an authorized servicer.
Unit is heavy and requires at least two people or proper equipment to move.
Do not lift appliance by door handle.
Hidden surfaces may have sharp edges. Use caution when reaching behind or under appliance.
This appliance complies with the latest version of one or more of the following standards:
CAN/CSA C22.2 No. 61 - Household Cooking Ranges
UL 858 - Household Electric Ranges
CAN/CSA C22.2 No. 150 - Microwave Ovens
UL 923 - Microwave Cooking Appliances
UL 507 - Electric Fans
CAN/CSA C22.2 No. 113 - Fans and Ventilators
CSA C22.2 No. 64 - Household Cooking and LiquidHeating Appliances
UL 1026 - Electric Household Cooking and Food Serving Appliances
It is the responsibility of the owner and the installer to determine if additional requirements and/or standards apply to specific installations.
Before you plug in an electrical cord or turn on power supply, make sure all controls are in the OFF position.
For appliances equipped with a cord and plug, do not cut or remove the ground prong. It must be plugged into
a matching grounding type receptacle to avoid electrical shock. If there is any doubt as to whether the wall receptacle is properly grounded, the customer should have it checked by a qualified electrician.
If required by the National Electrical Code (or Canadian Electrical Code), this appliance must be installed on a separate branch circuit.
Installer – show the owner the location of the circuit breaker or fuse. Mark it for easy reference.
Before installing, turn power OFF at the service panel. Lock service panel to prevent power from being turned ON accidentally.
Be sure your appliance is properly installed and grounded by a qualified technician. Installation, electrical connections and grounding must comply with all applicable codes.
PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY
Do not operate or allow the oven to be operated with the door open.
Make the following safety checks on all ovens to be serviced before activating the magnetron or other microwave source, and make repairs as necessary:
Before turning on microwave power for any service test or inspection within the microwave generating compartments, check the magnetron, wave guide or transmission line, and cavity for proper alignment, integrity, and connection.
Any damaged or misadjusted components in the interlock, monitor, door seal, and microwave generation and transmission systems shall be repaired, replaced, or adjusted by procedures described in this manual before the oven is released to the owner.
A microwave leakage check to verify compliance with the Federal Performance Standard should be performed on each oven prior to release to the owner.
3
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
This appliance must be grounded. Grounding reduces the risk of electric shock by providing a safe pathway for electric current in the event of a short circuit.
This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
Improper grounding can result in a risk of electric shock. Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance.
Remove all tape and packaging before using the appliance. Destroy the packaging after unpacking the appliance. Never allow children to play with packaging material.
Never modify or alter the construction of the appliance. For example, do not remove leveling legs, panels, wire covers or anti-tip brackets/screws.
To reduce the risk of fire, use only metal ductwork.
For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
State of California Proposition 65
Warnings
This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
4
Philips head screwdriver
1/8" drill bit and drill
Measuring tape
Microwave oven
Philips head screws
The outlet must be properly grounded in accordance with all applicable codes.
It can be installed in the back wall directly behind the appliance.
You can also connect your appliance directly to a compatible conventional Built-in Oven. Refer to separate Combination Instructions.
Use this checklist to verify that you have completed each step of the installation process. This can help you avoid common mistakes.
Refer to detailed instructions for each step in the sections following this checklist.
1.Before installing the appliance, be sure to verify the cabinet dimensions are correct for your appliance and that the required electrical connections are present. Make sure the electrical conduit provided on the appliance is able to reach to the point of connection.
Section: Dimensions and Cabinet Requirements
Section: Removing Packaging
Section: Removing Packaging
4.Team-lift the appliance directly into the cabinet cutout.
Section: Install Appliance, "Mount to Cabinet”
Section: Install Appliance, "Mount to Cabinet”
Section: Install Appliance, "Mount to Cabinet”
Always read and follow the complete installation instructions contained in this manual.
Different models use different packaging materials. Bracket remains in packaging base.
5
Cabinet requirements vary depending on the model to be installed. Please consult the section Dimensions for the details pertaining to your particular model.
¼" (6.4 mm) space between the side of the appliance and an adjacent wall or cabinet door when installed at the end of a cabinet run.
The cabinet base must be flat and capable of supporting the weight of your appliance when in use. See the appropriate weight for your model in the Dimensions section pertaining to your particular model. For combination units consult the section
Cabinet Dimension Requirements in the installation manual of your combination appliance.
The appliance door will overlap the furniture below by approx. 3/16" (5 mm) when opened. If necessary, you can elevate the appliance position by adding a panel in the required thickness on top of the supporting base. The supporting base must be level and securely fixed to the cabinet.
The outlet can be located anywhere within the shaded area. Anywhere within the shaded area, the minimal distance between the appliance and the wall is 1¾ in (45 mm).
PP
PP
HMB50152UC
HMB50162UC
|
|
|
èç¼ʓʘ |
|
|
|
ë |
ʌ¼ʚ |
|
|
|
|
|
|
|
|
|
|
ë |
|
|
|
|
|
|
|
|
ʌ¼ʚ |
|
ʌ¼ʚ |
|
|
|
|
|
|
ë |
PP |
|
|
ê
é
é
PP
6
|
|
|
é |
|
||
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
é |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ê |
|
|
|
|
|
|
|
|
ë ë |
|
|
|
|
|
|
|
|
|
|
|
|
|
Flush installation 30" units |
|
|
|
|
||
7RS YLHZ |
|
|
|
|
6LGH YLHZ |
|
|
|
|
|
|
FOHDWV |
|
|
|
ë |
|
é |
é |
|
|
|
|
|
|
|
|
|
ʎ¼ʚ |
)OXVK LQVHW |
RSHQLQJ |
IOXVK |
||
ʎ¼ʚ |
GHSWK |
|
FXW RXW |
FXW RXW |
||
|
KHLJKW |
KHLJKW |
||||
&OHDWV |
&OHDWV |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ê |
|
|
ë |
|
||
|
|
|
|
|||
é |
|
EDVHSODWH ʌ¼ʓʘ |
|
|||
|
|
|
|
|||
|
|
|
|
0HDVXUHPHQWV LQ LQFKHV PP |
Flush installation also requires:
two side cleats to be attached inside the cabinet frame, recessed from the front
a 5/16" (8 mm) baseplate underneath the unit body.
HMB57152UC
èç¼ʓʘ
ë |
ʌ¼ʚ |
|
|
||
|
||
|
|
ë |
|
|
|
|
ʌ¼ʚ
ʌ¼ʚ
ë
|
PP |
ê
é
é
PP
é
é
|
|
|
|
ê |
|
|
|
|
|
|
|
ë ë |
|
|
|
|
|
|
|
|
|
|
|
Flush installation 27" units |
|
|
|
||
7RS YLHZ |
|
|
|
6LGH YLHZ |
|
|
|
|
|
FOHDWV |
|
|
|
|
|
é |
é |
|
|
ë |
|
||
|
|
|
|
|
|
|
|
|
|||
|
|
)OXVK LQVHW |
RSHQLQJ |
IOXVK |
|
ʎ¼ʚ |
ʎ¼ʚ |
GHSWK |
FXW RXW |
FXW RXW |
|
&OHDWV |
&OHDWV |
|
|
KHLJKW |
KHLJKW |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
ê |
|
|
ë |
|
|
é |
|
|
|
|
EDVHSODWH ʌ¼ʓʘ
0HDVXUHPHQWV LQ LQFKHV PP
Flush installation also requires:
two side cleats to be attached inside the cabinet frame, recessed from the front
a 5/16" (8 mm) baseplate underneath the unit body.
7
The model stated on the front cover is rated at 120V AC, 60 Hz and uses a NEMA 5-15 plug to connect to a dedicated 120 V microwave circuit.
Model |
Connection |
Circuit |
|
|
|
Requirements |
|
|
|
|
|
HMB57152UC |
NEMA 5-15 |
120 V, |
15 Amps |
|
|
60 Hz |
|
|
|
|
|
HMB50152UC |
NEMA 5-15 |
120 V, |
15 Amps |
|
|
60 Hz |
|
HMB50162UC |
NEMA 5-15 |
120 V, |
15 Amps |
|
|
60 Hz |
|
|
|
|
|
Electrical Requirements:
a three prong grounded outlet
120 V, 60 Hz, AC only
15 Amp electrical supply with a fuse or a circuit breaker
This product must be connected to a supply circuit of the proper voltage and frequency. Wire size must conform to the requirements of the National Electric Code or the prevailing local code for this rating. The power supply cord and plug should be brought to a separate 20-amp branch circuit single grounded outlet. The outlet box should be located in the area behind the appliance (see section Cabinet Dimensions). The outlet box and supply circuit should be installed by a qualified electrician and conform to the National Electrical Code or the prevailing local code.
The voltage used must be the same as specified on this microwave oven. Using a higher voltage is dangerous and may result in a fire or oven damage. Using a lower voltage will cause slow cooking. The manufacturer is not responsible for any damages resulting from the use of the oven with any voltage other than specified.
Note: The appliance is heavy. It is advisable to install it with a second person.
Place a cup of water into the oven cavity. Follow the instructions in the Use and Care Manual on how to heat a beverage.
8
See the Use and Care Manual for troubleshooting information. Refer to the “Statement of Limited Product Warranty” in the Use and Care Manual.
To reach a service representative, see the contact information at the front of the manual or in the following section. Please be prepared with the information printed on your product data plate prior to calling.
The data plate shows the model and serial number. Refer to the data plate on the appliance when requesting service.
The data plate can be found on the inside of the appliance door.
To avoid having to search for each piece of information when calling, you can enter the four items needed in the spaces provided below.
Model No.
FD-No.
Date of Purchase
Customer Service O
Keep your invoice or escrow papers for warranty validation if service is needed.
We realize that you have made a considerable investment in your kitchen. We are dedicated to supporting you and your appliance so that you have many years of creative cooking.
Please don’t hesitate to contact our Customer Support Department if you have any questions or in the unlikely event that your Bosch® appliance needs service. Our service team is ready to assist you.
USA
800-944-2904 www.bosch-home.com/us/support
Canada
800-944-2904 www.bosch-home.ca/en/support
Parts, filters, descalers, stainless steel cleaners and more can be purchased in the Bosch® eShop or by phone.
USA www.bosch-home.com/us/store
Canada
Marcone 800-482-6022 or
Reliable Parts 800-941-9217
9