bernette 48 Funlock
Overlock/Coverstitch machine
The bernette 48 is the top model in the Funlock series and is a combination of an overlock and a coverstitch machine. It 
offers a total of 23 stitches: 15 overlock stitches, 3 coverstitches, 4 combo stitches and 1 chain stitch, the overlock stitches with a stitch width of up to 7 mm. The threading is facilitated by colorcoded threading paths, and a manual threader supports the threading of the needle eye. The looper threads are threaded mechanically. The knife is operated from below and thus provides not only a clean cutting edge but also safe handling 
and good visibility to the stitching. The b48 Funlock sews at a speed of up to 1300 stitches per minute. 
Stitch Overview
Modern, two-color |
|
Color-coded theading paths |
Swiss Design |
Practical carrier handle |
for easier threading |
LED light for optimal visibility
Spacious working area (87 mm)
High stitch quality with |
|
|
speeds of up to |
Accessories in looper cover |
|
1300 stitches per minute |
||
|
||
Differential feed |
Safety switch is activated |
|
|
when looper cover is open |
|
Knife drive from below for |
|
|
better visibility and safety |
Large cut-offs bin included |
www.mybernette.com
EN 03/17
Loading...