Beko CA5411FF User Manual

5 (1)
Beko CA5411FF User Manual

BEKO plc Beko House Caxton Way Watford Hertfordshire WD18 8UF

Tel: 0845 6004911

Fax: 0845 6004922

e-mail: service@beko.co.uk website: www.beko.co.uk

8.5 cu.ft.

Frost Free Combi

Fridge / Freezer

CA5411FF

CA5411FF1

CA5411FF2

Printed in Turkey

Part no: 48 0116 00 08

Congratulations on your choice of a quality Appliance which has been designed to give you service for many years.

WARNING !

IMPORTANT !

DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed.

Leave to stand for at least 4 hours before switching on to allow compressor oil to settle if transported horizontally.

If you are discarding an old refrigerator with a lock or latch fitted to the door, disable the lock/latch, ensure that it is left in a safe condition to prevent the entrapment of young children.

This fridge/freezer must only be used for its intended purpose i.e the storing and freezing of edible foodstuff.

Do not dispose of the appliance on a fire. At BEKO, the care and protection of our environment is

an ongoing commitment. This appliance which is among the latest range introduced is particularly environment friendly. Your appliance contains non CFC / HFC natural substances in the cooling system (Called R600a) and in the insulation (Called cyclopentane) which are potentially flammable if exposed to fire. Therefore, take care not to damage, the cooling circuit / pipes of the appliance

in transportation and in use. In case of a damage do not expose the appliance to fire, potential ignition source and immediately ventilate the room where the appliance is situated.

We suggest you contact your local authority for disposal information and facilities available. •See Installation Instructions on page 4 for information on suitable location.

To obtain the best possible performance and trouble free operation from your appliance it is very important to carefully read these instructions.

On delivery, check to make sure that the product is not damaged and that all the parts and accessories are in perfect condition.

We do not recommend the use of extension leads and multi-way adapters.

Failure to observe these instructions may invalidate your right to free service during the guarantee period.

WARNINGDo not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

WARNINGDo not damage the refrigerant circuit.

WARNINGDo not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

We suggest you keep these instructions in a safe place for easy reference.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety.

• Children should be supervised to ensure that they do not play

 

with the appliance.

Frost Free Combi

 

 

 

 

 

 

Fridge Freezer

 

PERFORMANCE

 

CA5411FF/FF-1/FF-2

 

Energy efficiency class

A

 

Energy consumption - Kwh/year

293

 

Net storage - vol fresh food ltrs (cu.ft.)

134 lt. (4.7)

 

Net storage - vol frozen food ltrs (cu.ft.)

63 lt. (2.2)

 

Total net vol - ltrs (cu.ft.)

197 lt. (6.9)

 

Frozen food compartment rating

4 STAR

 

Conservation time from failure

14 h.

 

Freezing capacity fresh food - kg (lb) / 24 hrs.

3.5 (7.7)

 

Climate class

SN

 

Operating noise level dB(A)

41

CONTENTS

PAGE

 

 

 

SAFETY FIRST / ELECTRICAL REQUIREMENTS

3

 

 

 

TRANSPORTATION INSTRUCTIONS

4

 

 

 

INSTALLATION INSTRUCTIONS

4-5

 

 

 

GETTING TO KNOW YOUR BEKO FRIDGE / FREEZER

6

 

 

 

REVERSING THE DOORS

7-8

 

 

 

SUGGESTED ARRANGEMENT OF FOOD IN THE FRIDGE / FREEZER

9

 

 

 

TEMPERATURE CONTROL AND ADJUSTMENT

10

 

 

 

STARTING

11

 

 

 

STORING FROZEN FOOD

11

 

 

 

FREEZING FRESH FOOD

12

 

 

 

MAKING ICE CUBES

12

 

 

 

DEFROSTING

13

 

 

 

CLEANING AND CARE

14

 

 

 

STAINLESS STEEL DOOR CLEANING INSTRUCTIONS

14

 

 

 

REPLACING THE INTERIOR LIGHT BULB

15

 

 

 

DO'S AND DON'TS

16

 

 

 

ENERGY SAVING TIPS

17

 

 

 

PROBLEM SOLVING

17

 

 

 

GUARANTEE DETAILS

18

 

 

 

HOW TO OBTAIN SERVICE

19

1

2

ELECTRICAL REQUIREMENTS

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply.

Rating label is on the left hand side of fridge inner liner.

We recommend that this appliance is connected to the mains supply via a suitable switched and fused socket in a readily accessible position.

Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO Authorised Service Agent.

WARNING! THIS APPLIANCE MUST BE EARTHED

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTA approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

IMPORTANT! FITTING A DIFFERENT PLUG

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

(See diagram).

1.Connect the green-yellow or green (Earth) wire to the terminal in the plug marked 'E' or with

the symbol or coloured green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked 'N' or coloured black.

GREEN &

 

 

 

 

6mm.

YELLOW

 

 

OR

 

GREEN

32mm.

 

L

 

 

 

BROWN

6mm.

 

 

 

N

 

 

OR

 

 

22mm.

RED

 

BLUE

 

 

 

6mm.

 

 

12mm.

OR

 

 

 

 

 

 

BLACK

 

 

 

 

CORD GRIP

 

 

 

FITTED WITH BS 1362 13A FUSE ALWAYS FIT BS 1362 REPLACEMENT CARTRIDGE FUSE

 

FUSE

 

 

 

 

 

 

 

 

 

 

3.Connect the brown (Live) wire to the terminal in the plug marked 'L' or coloured red.

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box.

If in doubt contact a qualified electrician.

3

TRANSPORTATION INSTRUCTIONS

1.The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance has to be transported horizontally, it must only be laid on its right hand side when standing in the front of the appliance. After bringing it to upright position,it must not be operated for at least 4 hours to allow the system to settle.

3.Failure to comply with the above instructions could result in damage occuring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.

4.The appliance must be protected against rain, moisture and other atmospheric influences.

5.When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the door or handle.

6.Empty any water in the drain tray before moving. See section ‘Defrosting’ and ‘Care & cleaning’ for further information.

7.Make sure that the defrost water pipe at the back of the product is fixed to the

plastic evaporating pan on the top of the compressor, to avoid defrost water spillage on the floor.

IMPORTANT : Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the appliance as you might injure your fingers and hands.

Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

"IMPORTANT: Make sure that mains cable is not caught under the appliance during and after carrying / moving the appliance, to avoid the mains cable becoming cut or damaged."

Do not allow children to play with the appliance or tamper with the controls. BEKO plc declines to accept any liability should the instructions not be followed.

IMPORTANT

INSTALLATION INSTRUCTIONS

1.The space in the room where the appliance is installed must not be smaller than 10 cubic metres.

2.This appliance has been designed to operate in ambient temperatures up to 32 degrees C (90 degrees F) and is equipped with Advanced Electronic Temperature Control System [AETCS] which ensures that at the advised setting [4 - four on the knob] the frozen food in the freezer will not defrost even if the ambient temperature

falls as low as -15 °C. So you may install your appliance in a garage or an unheated room without having to worry about frozen food in the freezer being spoilt. However at low ambient temperatures mentioned above, fridge contents are likely to freeze, so check and consume food in the fridge accordingly. When the ambient temperature returns to normal, you may change the knob setting to suit your needs.

If the ambient temperature is below 0 °C, the food in the fridge compartment will freeze. So, we recommend you don't use the fridge compartment in such low ambient conditions. You can continue using the freezer compartment as usual.

4

3.Do not place the appliance near cookers, radiators or in direct sunlight as this will cause your appliance to work harder. If installed next to a source of heat or freezer, maintain the following minimum side clearances:

From Cookers

50 mm (2")

 

 

From Radiators

300 mm (12")

 

 

From Freezers

25 mm (1")

 

 

4.Make sure that sufficient room is provided around the appliance to ensure free air circulation.

Fit the Two plastic wall spacers supplied with the appliance rotating 1/4 turn to the condenser at the back of the appliance (See Diagram).

5. The fridge/freezer should be located on a smooth surface. The two front feet

can be adjusted as required. To ensure that your appliance is standing

upright adjust the two front feet by turning clockwise or anti-clockwise, until

the product is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise.

6. Refer to cleaning and care section to prepare your appliance for use.

A special receptacle is supplied to store the mains plug during transit. The receptacle is fixed at the back of the

cabinet, on the side of the compressor. (See diagram) Gently remove the plug from the receptacle. Never pull the mains cord, you may damage the appliance. In the case of transportation,

ensure you locate the plug in the receptacle provided to avoid transit damage.

5

GETTING TO KNOW YOUR COMBI BEKO FRIDGE / FREEZER

TEMPERATURE

EGG TRAY

SETTING KNOB

 

INTERIOR LIGHT

 

CABINET SHELVES

 

DEFROST WATER

SALAD

COLLECTION CHANNEL

CRISPER

INTERIOR

 

LIGHT BUTTON

 

ICE BANK

 

FREEZER FAN

 

FAST FREEZE

 

COMPARTMENT

 

FROZEN FOOD

 

STORAGE DRAWERS

 

 

ADJUSTABLE

 

FEET

TEMPERATURE

EGG TRAY

SETTING KNOB

 

INTERIOR LIGHT

 

CABINET SHELVES

 

DEFROST WATER

SALAD

COLLECTION CHANNEL

CRISPER

INTERIOR

 

LIGHT BUTTON

 

ICE BANK

 

FREEZER FAN

 

FAST FREEZE

 

COMPARTMENT

 

FROZEN FOOD

 

STORAGE DRAWERS

 

 

ADJUSTABLE

 

FEET

6

 

Loading...
+ 7 hidden pages