Frost Free Combi
Fridge / Freezer
CFD6914W
CFD6914S
CFD6914X
Please read this manual first!
Dear Customer,
We hope that your product, which has been produced in modern plants and checked under the most meticulous quality control procedures, will provide you with years of good service.
For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future reference.
This manual
•Will help you use your appliance quickly and safely.
•Read the manual before installing and operating your product.
•Follow the instructions, especially those for safety.
•Keep the manual in an easily accessible place as you may need it later.
•Besides, read also the other documents provided with your product.
Please note that this manual may be valid for other models as well.
Symbols and their descriptions
This instruction manual contains the following symbols:
C Important information or useful usage tips.
AWarning against dangerous conditions for life and property.
BWarning against electric voltage.
This product is supplied with the selective sorting symbol for waste electrical Recycling and electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimise its impact on the environment. For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.
CONTENTS
1 |
Your refrigerator |
4 |
2 |
Warnings |
5 |
ELECTRICAL REQUIREMENTS.......... |
6 |
|
WARNING! THIS APPLIANCE MUST BE |
||
EARTHED.......................................... |
6 |
|
ENERGY SAVING TIPS...................... |
7 |
|
3 |
Installation |
8 |
TRANSPORTATION INSTRUCTIONS. 8 |
||
INSTALLATION INSTRUCTIONS........ |
9 |
|
REPLACING THE INTERIOR LIGHT |
|
|
BULB .............................................. |
10 |
|
REVERSING THE DOORS................ |
11 |
|
Reversing the doors......................... |
13 |
|
5 Using your refrigerator 15 |
|
TEMPERATURE CONTROL AND |
|
ADJUSTMENT................................. |
15 |
SUGGESTED ARRANGEMENT OF |
|
FOOD IN THE FRIDGE/FREEZER..... |
16 |
STORING FROZEN FOOD............... |
17 |
FREEZING FRESH FOOD................. |
17 |
MAKING ICE CUBES....................... |
18 |
DEFROSTING.................................. |
18 |
Water dispenser............................... |
19 |
6 Maintenance and |
|
cleaning |
21 |
7 Do’s and Don’ts |
22 |
4 Before operating |
14 |
Final Check...................................... |
14 |
3EN
1 Your refrigerator
12
|
1 |
11 |
|
|
|
|
2 |
|
|
3 |
|
|
4 |
|
|
3 |
13 |
14 |
|
|
|
|
|
|
3 |
|
|
5 |
|
|
6 |
|
|
7 |
|
|
8 |
|
|
9 |
|
|
9 |
|
15 |
|
|
|
9 |
|
|
9 |
|
|
10 |
|
1. |
Thermostat knob |
9. |
Deep-freeze compartment |
|
2. |
Interior Light |
|||
10. |
Adjustable front feet |
|||
3. |
Adjustable body shelves |
|||
11. |
Fridge compartment door |
|||
4. |
Wine rack |
|||
|
shelves |
|||
5. |
Defrost water collection |
|
||
12. |
Egg holders |
|||
|
channel - Drain tube |
|||
|
13. |
Water disperser |
||
6. |
Crisper cover |
|||
14. |
Fridge compartment |
|||
7. |
Crisper |
|||
15. |
Freezer compartment |
|||
8. |
Icebank tray |
|||
|
|
CFigures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.
4EN
2 Warnings
•DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed.
•Leave to stand for at least 4 hours before switching on to allow
compressor oil to settle if transported horizontally.
•If you are discarding an old refrigerator with a lock or latch fitted to the door, disable the lock/latch, ensure that it is left in a safe condition to prevent the entrapment of young children.
•This fridge/freezer must only be used for its intended purpose i.e the storing and freezing of edible foodstuff.
•Do not dispose of the appliance on a fire. At BEKO, the care and protection of our environment is an ongoing commitment. This appliance which
is among the latest range introduced is particularly environment friendly.
Your appliance contains non CFC / HFC natural substances in the cooling system (Called R600a) and in the insulation (Called cyclopentane) which are potentially flammable if exposed to fire. Therefore, take care not to damage, the cooling circuit / pipes of the appliance in transportation and in use. In case of damage do not expose the appliance to fire or potential ignition source and immediately ventilate the room where the appliance is situated.
•We suggest you contact your local authority for disposal information and facilities available.
•See Installation Instructions on on page 8 for information on suitable
location. |
5 |
|
•To obtain the best possible performance and trouble free operation from your appliance it is very important to carefully read these instructions.
•On delivery, check to make sure that the product is not damaged and that all the parts and accessories are in perfect condition.
•Ensure that the plug remains readily accessible. Do not use multiple adapter bar or extension cable.
•Failure to observe these instructions may invalidate your right to free service during the guarantee period.
•Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
•Do not use mechanical devices
or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
•Do not damage the refrigerant circuit.
•Do not use electrical appliances inside the food storage compartments of the appliance, unless they are
of the type recommended by the manufacturer.
•We suggest you keep these instructions in a safe place for easy reference.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play
with the appliance.
EN
ELECTRICAL REQUIREMENTS
Before you insert the plug into the wall socket make sure that the voltage and the frequency shown on the rating plate inside the appliance corresponds to your electricity supply.
Rating label is on the left hand side of fridge inner liner.
We recommend that this appliance be connected to the mains supply via a
suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.
Should the mains lead of the appliance become damaged or should it need
replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO Authorised Service Agent.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.
The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an
ASTABEAB approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted. Colour
of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.
IMPORTANT! FITTING A DIFFERENT PLUG
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: (See diagram).
1. Connect the green-yellow or green
(Earth) wire to the terminal in the plug marked ‘E’ or with the symbol 
or coloured green and yellow or green.
2.Connect the blue (Neutral) wire to the terminal in the plug marked ‘N’ or coloured black.
3.Connect the brown (Live) wire to the terminal in the plug marked ‘L’ or coloured red.
With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.
GREEN & |
|
6mm. |
|
|
|
|
|
YELLOW |
|
|
|
OR |
|
L |
|
GREEN |
32mm. |
|
|
|
BROWN |
|
|
|
|
6mm. |
|
N |
|
OR |
|
|
RED |
|
|
|
|
|
|
BLUE |
|
22mm. |
|
6mm. |
|
12mm. |
|
BLACK |
|
||
OR |
|
|
|
CORD GRIP
FUSE |
FITTED WITH 1362 13A FUSE ALWAYS |
BS 1362 REPLACEMENT |
CARTRIDGE FUSE |
|
BS |
FIT |
|
6EN
ENERGY SAVING TIPS
1- Ensure your appliance is installed in a well ventilated area.
2- Ensure the time between buying chilled/frozen food and placing them in your appliance is kept to a minimum, particularly in summer. We recommend you use a cool bag or a special carrier bag to carry frozen food.
3- Do not leave the door (s) of your appliance open longer than necessary and ensure they are closed properly after each opening.
4- Defrost frozen food in the fridge compartment, so that frozen food acts as an ice pack to assist cooling in the fridge.
7EN
3 Installation
TRANSPORTATION
INSTRUCTIONS
1.The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.
2.If during the course of transport the appliance has to be transported horizontally, it must only be laid on its right hand side when standing in the frontof the appliance. After bringing it to upright position,it must not be operated for at least 4 hours to allow the system to settle.
3.Failure to comply with the
above instructions could result in damage occuring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.
4.The appliance must be protected against rain, moisture and other atmospheric influences.
5.When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the door or handle.
6.Empty any water in the drain
tray before moving. See section
‘Defrosting’ and ‘Care & cleaning’ for further information.
7. Make sure that the defrost water pipe at the back of the product is fixed to the plastic evaporating pan on the top of the compressor, to avoid defrost water spillage on the floor.
IMPORTANT : Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the appliance as you might injure your fingers and hands.
Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.
“IMPORTANT: Make sure that mains cable is not caught under the appliance during and after carrying
/ moving the appliance, to avoid the mains cable becoming cut or damaged.”
Do not allow children to play with the appliance or tamper with the controls.
BEKO declines to accept any liability should the instructions not be followed.
8EN
Loading...