Refrigerator
User manual
CFG1582DW - CFG1582DB - CFG1582DS - CRFG1582DS CXFP1582DS - CXFP1582DW - CXFP1582D1S -CXFP1582D1W CFG3582DB - CFG3582DW - CFG3582DS - CRFG3582DS CXFP3582DS - CXFP3582DW
EN /
57 8079 0000/BE
Please read these instructions first before using your appliance
Thank you for choosing a Beko appliance.
Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
Carefully follow all unpacking and installation instructions to ensure the appliance is correctly connected and fitted prior to use.
Please write your product model and serial number on the last page of this user manual, and store in a safe location close to the appliance for easy future reference.
This user manual may also be applicable for several other models. Differences between models will be listed.
If you have any questions or concerns, please call our contact centre or find help and information online at www.beko.co.uk
Symbols and their descriptions
This instruction manual contains the following symbols:
C
AWarning against dangerous conditions for life and property.
BWarning against electric voltage.
C INFORMATION |
|
|
|
|
|
The model information as stored in the product data |
base |
|
|
can be reached by entering following website and searching |
|
|
|
for your model identifier (*) found on energy label. |
|
SUPPLIER’S NAME |
MODEL IDENTIFIER |
(*) |
|
A |
A |
https://eprel.ec.europa.eu/ |
|
|
|
||
|
|
|
|
1 Your refrigerator |
4 |
2 Warnings |
5 |
Electrical requirements........................... |
6 |
Warning! This appliance must be |
|
earthed........................................................... |
6 |
Energy saving tips..................................... |
7 |
Compliance with WEEE Directive and |
|
Disposing of the Waste Product: ........ |
8 |
Compliance with rohs directive:.......... |
8 |
Package information................................. |
8 |
3 Installation |
9 |
Points to be paid attention to when |
|
the relocation of the refrigerator........ |
9 |
Electrical connection................................ |
9 |
Disposing of the packaging................. |
10 |
Disposing of your old refrigerator..... |
10 |
Placing and Installation......................... |
10 |
Adjusting the legs.................................... |
11 |
Chiller Compartment............................... |
11 |
Changing the illumination lamp ........ |
11 |
4 Preparation |
12 |
Reversing the doors................................ |
13 |
5 Using your appliance |
14 |
Cooling.......................................................... |
14 |
Storing Frozen Food................................ |
15 |
Freezing Fresh Food............................... |
15 |
Placing the food........................................ |
15 |
Defrosting of the appliance................. |
15 |
Take out the bottom door shelf ........ |
16 |
6 Maintenance and |
|
cleaning |
20 |
Protection of plastic surfaces ........... |
20 |
7 Troubleshooting |
21 |
3 EN
1 Your refrigerator
Congratulations on your choice a Beko quality Appliance which has been designed to give you service for many years.
1.Adjustable door shelves
2.Water dispenser filling tank
3.Egg section
4.Water dispenser reservoir
5.Bottle shelf
6.Adjustable Front Feet
7.Freezing and Storage (store fresh food to be frozen lower down)
8.Freezer fan
9.Salad Crisper
10.Chiller compartment
11.Adjustable shelves
12.Wine rack
13.Thermostat knob
*May not be available in all models
C Figures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.
4 EN
|
Warnings |
|
|
2 |
|
||
|
|
|
|
• |
Do not connect your |
do not expose the appliance |
|
|
appliance to the electricity |
to fire or potential ignition |
|
|
supply until all packing and |
source and immediately |
|
|
transit protectors have been |
ventilate the room where the |
|
|
removed. |
appliance is situated. |
|
• |
If transported horizontally |
• We suggest you contact your |
|
|
leave to stand upright for at |
local authority for disposal |
|
|
least 4 hours before switching |
information and facilities |
|
|
on to allow compressor oil to |
available. |
|
|
settle |
• To obtain the best possible |
|
• If you are discarding an old |
performance and trouble free |
||
|
refrigerator with a lock or latch |
operation from your appliance |
|
|
fitted to the door, disable the |
it is very important to carefully |
|
|
lock/latch, ensure that it is left |
read these instructions. |
|
|
in a safe condition to prevent |
• On delivery, check to make |
|
|
the entrapment of young |
sure that the product is not |
|
• |
children. |
damaged and that all the parts |
|
This fridge/freezer must |
and accessories are in perfect |
||
|
only be used for its intended |
condition. |
|
|
purpose i.e the storing and |
• Ensure that the plug remains |
|
|
freezing of edible foodstuff. |
readily accessible. Do not use |
|
• Do not dispose of the |
multiple adapter or extension |
||
|
appliance on a fire. At Beko, |
cable. |
|
|
the care and protection |
• Failure to observe these |
|
|
of our environment is an |
instructions may invalidate |
|
|
ongoing commitment. This |
your right to free service |
|
|
appliance which is among |
during the guarantee period. |
|
|
the latest range introduced |
• Keep ventilation openings, in |
|
|
is particularly environment |
||
|
the appliance enclosure or in |
||
|
friendly. Your appliance |
||
|
the built-in structure, clear of |
||
|
contains non CFC / HFC |
||
|
obstruction. |
||
|
natural substances in the |
||
|
• Do not damage the refrigerant |
||
|
cooling system (Called |
||
|
R600a) and in the insulation |
circuit. |
|
|
(Called cyclopentane) which |
• Do not use electrical |
|
|
are potentially flammable if |
appliances inside the food |
|
|
exposed to fire. Therefore, |
storage compartments of the |
|
|
take care not to damage, the |
appliance, unless they are of |
|
|
cooling circuit / pipes of the |
the type recommended by the |
|
|
appliance in transportation |
manufacturer. |
|
|
and in use. In case of damage |
|
|
5 EN
•We suggest you keep these instructions in a safe place for easy reference.
•This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
•Children should be supervised to ensure that they do not play with the appliance.
Electrical requirements
Before you insert the plug into the wall socket make sure that the voltage and the frequency shown on the rating plate inside the appliance corresponds to your electricity supply.
Rating label is on the left hand side of fridge inner liner.
We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.
WARNING:
When positioning the appliance ensure the supply cord is not trapped or damaged.
Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Beko authorised service agent.
Warning! This appliance must be earthed
If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.
The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted.
Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.
6 EN
Important! Fitting A
Different Plug
1. As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: (See diagram).
2. Connect the green-yellow or green (Earth) wire to the terminal in the plug marked ‘E’ or with the symbol 
or coloured green and yellow or green.
3. Connect the blue (Neutral) wire to the terminal in the plug marked ‘N’ or coloured black.
4. Connect the brown (Live) wire to the terminal in the plug marked ‘L’ or coloured red.
5. With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt
contact a qualified electrician.
GREEN & |
|
6mm. |
|
|
|
|
|
YELLOW |
|
|
|
OR |
|
L |
|
GREEN |
32mm. |
|
|
|
BROWN |
|
|
|
|
6mm. |
|
N |
|
OR |
|
|
RED |
|
|
BLUE |
|
22mm. |
|
6mm. |
|
12mm. |
|
BLACK |
|
||
OR |
|
|
|
CORD GRIP
FUSE |
FITTED WITH 1362 13A FUSE ALWAYS |
BS 1362 REPLACEMENT |
CARTRIDGE FUSE |
|
BS |
FIT |
|
Energy saving tips
1.Ensure your appliance is installed in a well ventilated area.
2.Ensure the time between buying chilled/frozen food and placing them in your appliance is kept at minimum, particularly in summer. We recommend you use a cool bag or a special carrier bag to carry perishable food.
3.Do not leave the door (s) of your appliance open longer than necessary and ensure they are closed properly after each opening.
4.Defrost frozen food in the fridge compartment, so that frozen food acts as an ice pack to assist cooling in the fridge.
5.Energy consumption of this appliance is measured while freezer compartment is loaded without use of top shelf lid and the drawers except the bottom drawer. It is advised that freezer compartment is loaded
without use of drawers except the bottom drawer in order
to achieve maximum loading capacity.
7 EN
Compliance with WEEE Directive and Disposing of the Waste Product:
This product complies
with EU WEEE Directive (2012/19/ EU). This product bears a classification symbol for waste
electrical and electronic equipment (WEEE).This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.
Compliance with rohs directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
Package information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
8 EN
3 Installation
BThe manufacturer will not be liable for any event caused by disregarding the information supplied in this user manual.
Points to be paid attention to when the relocation of the refrigerator
1.Your refrigerator should be unplugged.Before transportation of your refrigerator, it should be emptied and cleaned.
2.Before it is re-packaged, shelves, accessories, crisper, etc. inside your refrigerator should be fixed with adhesive tape and secured against impacts. Package should be bound with a thick tape or sound ropes and the transportation rules on the package should be strictly observed.
3.Original packaging and foam materials should be kept for future transportations or moving.
Before you start the refrigerator,
Check the following before you start to use your refrigerator:
1.Attach 2 plastic wedges as illustrated below. Plastic wedges are intended to keep the distance which will ensure the air circulation between your refrigerator and the wall. (The picture is drawn up as a representation and it is not identical with your product.)
2.Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.
3.Connect the plug of the refrigerator to the wall socket. When the fridge door is opened, fridge
internal lamp will turn on. |
9 |
4.When the compressor starts to operate, a sound will be heard. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.
5.Front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.
Electrical connection
Connect your product to a grounded socket which is being protected by a fuse with the appropriate capacity.
Important:
The connection must be in compliance with national regulations.
•The power plug must be easily accessible after installation.
•Electrical safety of your refrigerator shall be guaranteed only if the earth system in your house complies with standards.
•The voltage stated on the label located at left inner side of your product should be equal to your network voltage.
EN
Loading...