Beko CFD640S, CFD640W, CFD640B User Manual

Frost Free Combi

Fridge / Freezer

CFD640B

CFD640W

CFD640S

Important information or useful usage tips.

Please read this manual first!

Dear Customer,

We hope that your product, which has been produced in a 1st-class manufacturing facility and checked under the most meticulous quality control procedures, will provide you with years of good service.

For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future reference.

This manual

•Will help you use your appliance quickly and safely.

•Read the manual before installing and operating your product.

•Follow the instructions, especially those for safety.

•Keep the manual in an easily accessible place as you may need it later.

•Besides, read also the other documents provided with your product. Please note that this manual may be valid for other models as well.

Symbols and their descriptions

This instruction manual contains the following symbols:

C

A Warning against dangerous conditions for life and property.

B Warning against electric voltage.

1 Your refrigerator	4
2 Warnings	5
Electrical requirements.......................	6
Warning! This appliance must be
earthed..............................................	6
Energy saving tips..............................	7
Compliance with WEEE Directive and
Disposing of the Waste Product: .......	7
Compliance with rohs directive:.........	7
Package information..........................	7
3 Installation	8
Points to be considered when re-
transporting your refrigerator..............	8
Before operating your refrigerator.......	8
Disposing of the packaging................	9
Disposing of your old refrigerator........	9
Placing and Installation.......................	9
Transportation Instructions...............	10
Installation Instructions.....................	10
Replacing the interior light bulb ......	12
Reversing The Doors........................	13
Reversing the doors.........................	15

4 Before operating	16
Final Check......................................	16
5 Using your refrigerator	17
Temperature Control And
Adjustment.......................................	17
Suggested Arrangement Of Food In
The Fridge/Freezer...........................	18
Storing Frozen Food.........................	19
Freezing Fresh Food.........................	19
Making Ice Cubes............................	19
Defrosting........................................	20
Water Dispenser...............................	21
*optional...........................................	21
6 Maintenance and cleaning 23
Protection of plastic surfaces ..........	23
7 Recommended solutions for
the problems	24
8 Guarantee Details	28
9 How To Obtain Service	29

3 EN

1 Your refrigerator

Congratulations on your choice of a BEKO quality Appliance which has been designed to give you service for many years.

		12
	1	11
	2
	3
	4
14	3	13
	3
	5
	6
	7
	8
	9
15	9
	9
	9
	10

1.	Thermostat control	8.	Icebank tray
2.	Interior Light	9.	Deep-freeze compartment
3.	Adjustable body shelves	10.Adjustable front feet
4.	Wine rack	11.Fridge compartment door shelves
5.	Defrost water collection channel -	12.Egg holders
	Drain tube	13.Water disperser
6.	Crisper cover	14.Fridge compartment
7.	Crisper	15.Freezer compartment

CFigures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.

4 EN

2 Warnings

•Do not connect your appliance to the electricity supply until all packing and transit protectors have been removed.

•If transported horizontally leave to stand upright for at least 4

hours before switching on to allow compressor oil to settle

•If you are discarding an old refrigerator with a lock or latch fitted to the door, disable the lock/latch, ensure that it is left in a safe condition to prevent the entrapment of young children.

•This fridge/freezer must only be used for its intended purpose i.e the storing and freezing of edible foodstuff.

•Do not dispose of the appliance on a fire. At BEKO, the care and protection of our environment is an

ongoing commitment. This appliance which is among the latest range introduced is particularly environment friendly. Your appliance contains non CFC / HFC natural substances in the cooling system (Called R600a) and in the insulation (Called cyclopentane) which are potentially flammable

if exposed to fire. Therefore, take care not to damage, the cooling circuit / pipes of the appliance in transportation and in use. In case of damage do not expose the appliance to fire or potential ignition source and immediately ventilate the room where the appliance is situated.

•We suggest you contact your local authority for disposal information and facilities available.

•See Installation Instructions on on page 8 for information on suitable location.

•To obtain the best possible performance and trouble free operation from your appliance it is very important to carefully read these instructions.

•On delivery, check to make sure that the product is not damaged and that all the parts and accessories are in perfect condition.

•Ensure that the plug remains readily accessible. Do not use multiple adapter or extension cable.

•Failure to observe these instructions may invalidate your right to free service during the guarantee period.

•Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

•Do not use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the manufacturer.

•Do not damage the refrigerant circuit.

•Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

•We suggest you keep these instructions in a safe place for easy reference.

5 EN

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

•Children should be supervised to ensure that they do not play with the appliance.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown on the rating plate inside the appliance corresponds to yourelectricity supply.

Rating label is on the left hand side of fridge inner liner.

We recommend that this appliance be connected to the mains supply via a

Suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.

Should the mains lead of the appliance become damaged or should it need

Replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO authorised service agent.

Warning! This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted.

Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Important! Fitting A Different Plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: (See diagram).

1.Connect the green-yellow or green (Earth) wire to the terminal in the plug

marked ‘E’ or with the symbol or coloured green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3.Connect the brown (Live) wire to the terminal in the plug marked ‘L’ or coloured red.

GREEN &		6mm.
YELLOW
OR		L
GREEN	32mm.
		BROWN	6mm.
N		OR
		RED
		22mm.
BLUE			12mm.
OR	6mm.
BLACK

CORD GRIP

FUSE	FITTED WITH 1362 13A FUSE ALWAYS BS 1362 REPLACEMENT CARTRIDGE FUSE
	BS FIT

6 EN

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

Energy saving tips

1.Ensure your appliance is installed in a well ventilated area.

2.Ensure the time between buying chilled/frozen food and placing them in your appliance is kept at minimum, particularly in summer. We recommend you use a cool bag or a

special carrier bag to carry perishable food.

3.Do not leave the door (s) of your appliance open longer than necessary and ensure they are closed properly after each opening.

4.Defrost frozen food in the fridge compartment, so that frozen food acts as an ice pack to assist cooling in the fridge.

Compliance with rohs directive:

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Compliance with WEEE Directive and Disposing of the Waste Product:

This product complies with EU WEEE
	Directive (2012/19/EU). This
	product bears a classification
	symbol for		waste electrical
	and	electronic		equipment
	(WEEE).This		product		has
	been	manufactured			with
	high	quality		parts	and
materials which can be reused and are
suitable for recycling. Do not dispose of
the waste product with normal domestic
and other wastes at			the	end	of its

service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about

these collection centers.	7 EN

3 Installation

B Please remember that the manufacturer shall not be held liable if the information given in the instruction manual is not observed.

Points to be considered when re-transporting your refrigerator

1.Your refrigerator must be emptied and cleaned prior to any transportation.

2.Shelves, accessories, crisper and etc. in your refrigerator must be fastened securely by adhesive tape against any jolt before repackaging.

3.Packaging must be adequate and the rules of transportation printed on the package must be followed.

Please do not forget…

Every recycled material is an indispensable source for the nature and for our national resources.

If you wish to contribute to recycling the packaging materials, you can get further information from the environmental bodies or local authorities.

Before operating your refrigerator

Before starting to use your refrigerator check the following:

1.Is the interior of the refrigerator dry and can the air circulate freely in the rear of it?

2.Please install the 2 plastic wedges as illustrated in the figure. Plastic wedges will provide the required distance between your refrigerator and the wall in order to allow the air circulation. (The illustrated figure is

only an example and does not match
exactly with your product.)	8

3.Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.

4.Plug the refrigerator into the wall outlet. When the fridge door is open, the fridge compartment interior light will come on.

5.You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.

6.Front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.

Electric connection

Connect your product to a grounded socket which is being protected by a fuse with the appropriate capacity.

Important:

•The connection must be in compliance with national regulations.

•The power cable plug must be easily accessible after installation.

•The specified voltage must be equal to your mains voltage.

•Extension cables and multiway plugs EN must not be used for connection.

B A damaged power cable must be replaced by a qualified electrician.

B Product must not be operated before it is repaired! There is danger of electric shock!

Disposing of the packaging

The packing materials may be dangerous for children. Keep the packing materials out of the reach of children or dispose of them by classifying them in accordance with the waste instructions. Do not dispose of them along with the normal household waste.

The packing of your refrigerator is produced from recyclable materials.

Disposing of your old refrigerator

Dispose of your old refrigerator without giving any harm to the environment.

•You may consult your authorised dealer or waste collection center of your municipality about the disposal of your refrigerator.

Before disposing of your refrigerator, cut out the electric plug and, if there are any locks on the door, make them inoperable in order to protect children against any danger.

Placing and Installation

A If the entrance door of the room where the refrigerator will be installed is not wide enough for the refrigerator to pass through, then carefully remove the doors of your refrigerator and pass it sideways through the door.

1.Install your refrigerator to a place that allows ease of use.

2.Keep your refrigerator away from heat sources, humid places and direct sunlight.

3.There must be appropriate air ventilation around your refrigerator in order to achieve an efficient operation. If the refrigerator is to be placed in a recess in the wall, there must be at least 5 cm distance with the ceiling and at least 5 cm with the wall. If the floor is covered with a carpet, your product must be elevated 2.5 cm from the floor.

4.Place your refrigerator on an even floor surface to prevent jolts.

9 EN