Loading...
Version 1.0
Published June 2017
Copyright©2017 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
Contents
Chapter 1 Introduction |
1 |
|
1.1 |
Package Contents |
1 |
1.2 |
Specifications |
2 |
1.3 |
Motherboard Layout |
6 |
1.4 |
I/O Panel |
8 |
Chapter 2 Installation |
10 |
|
2.1 |
Installing the CPU |
11 |
2.2 |
Installing the CPU Fan and Heatsink |
14 |
2.3 |
Installing Memory Modules (DIMM) |
15 |
2.4 |
Expansion Slots (PCI Express Slots) |
17 |
2.5 |
Jumpers Setup |
18 |
2.6 |
Onboard Headers and Connectors |
19 |
2.7 |
PCIe Power Connector Installation Guide |
23 |
2.8 |
M.2_SSD (NGFF) Module Installation Guide |
24 |
Chapter 3 Software and Utilities Operation |
27 |
|
3.1 |
Installing Drivers |
27 |
3.2 |
ASRock Live Update & APP Shop |
28 |
3.2.1 |
UI Overview |
28 |
3.2.2 |
Apps |
29 |
3.2.3 |
BIOS & Drivers |
32 |
3.2.4 |
Setting |
33 |
3.3 |
Enabling USB Ports for Windows® 7 Installation |
34 |
Chapter 4 UEFI SETUP UTILITY |
37 |
|
4.1 |
Introduction |
37 |
4.1.1 |
UEFI Menu Bar |
37 |
4.1.2 |
Navigation Keys |
38 |
4.2 |
Main Screen |
39 |
4.3 |
OC Tweaker Screen |
40 |
4.4 |
Advanced Screen |
48 |
4.4.1 |
CPU Configuration |
49 |
4.4.2 |
Chipset Configuration |
51 |
4.4.3 |
Storage Configuration |
54 |
4.4.4 |
Super IO Configuration |
55 |
4.4.5 |
ACPI Configuration |
56 |
4.4.6 |
USB Configuration |
58 |
4.4.7 |
Trusted Computing |
59 |
4.5 |
Tools |
60 |
4.6 |
Hardware Health Event Monitoring Screen |
61 |
4.7 |
Security Screen |
63 |
4.8 |
Boot Screen |
64 |
4.9 |
Exit Screen |
67 |
H110 Pro BTC+
Chapter 1 Introduction
Thank you for purchasing ASRock H110 Pro BTC+ motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
In this documentation, Chapter 1 and 2 contains the introduction of the motherboard and step-by-step installation guides. Chapter 3 contains the operation guide of the software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice. In case any modifications of this documentation occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
1.1 Package Contents
•ASRock H110 Pro BTC+ Motherboard (ATX Form Factor)
•ASRock H110 Pro BTC+ Quick Installation Guide
•ASRock H110 Pro BTC+ Support CD
•1 x I/O Panel Shield
•2 x Serial ATA (SATA) Data Cables (Optional)
•1 x Screw for M.2 Socket (Optional
English
1
English
1.2 Specifications
Platform |
• |
ATX Form Factor |
|
• |
Solid Capacitor design |
CPU |
• |
Supports 7th and 6th Generation Intel® CoreTM i7/i5/i3/ |
|
|
Pentium®/Celeron® Processors (Socket 1151) |
|
• Supports CPU up to 91W |
|
|
• |
Digi Power design |
|
• 8 Power Phase design |
|
|
• Supports Intel® Turbo Boost 2.0 Technology |
|
Chipset |
• |
Intel® H110 |
Memory |
• |
Dual Channel DDR4 Memory Technology |
•2 x DDR4 DIMM Slots
•Supports DDR4 2400/2133 non-ECC, un-buffered memory*
*7th Gen Intel® CPU supports DDR4 up to 2400; 6th Gen Intel® CPU supports DDR4 up to 2133.
•Supports ECC UDIMM memory modules (operate in nonECC mode)
•Max. capacity of system memory: 32GB
•Supports Intel® Extreme Memory Profile (XMP) 2.0
•15μ Gold Contact in DIMM Slots
Expansion |
• 1 x PCI Express 3.0 x16 Slot (PCIE2: x16 mode)* |
Slot |
* Supports NVMe SSD as boot disk |
|
• 12 x PCI Express 2.0 x1 Slots |
Graphics |
• Intel® HD Graphics Built-in Visuals and the VGA outputs |
|
can be supported only with processors which are GPU |
|
integrated. |
|
• Supports Intel® HD Graphics Built-in Visuals : Intel® Quick |
|
Sync Video with AVC, MVC (S3D) and MPEG-2 Full |
|
HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD |
|
Technology, Intel® InsiderTM, Intel® HD Graphics |
|
• Gen9 LP, DX11.3, DX12 |
|
• HWAEncode/Decode: VP8, HEVC 8b, VP9, HEVC 10b (For |
|
7th Gen Intel® CPU) |
2
H110 Pro BTC+
• HWA Encode/Decode: VP8 , HEVC 8b; GPU/SWEncode/ Decode: VP9, HEVC 10b (For 6th Gen Intel® CPU)
• Max. shared memory 1024MB
* The size of maximum shared memory may vary from different operating systems.
• Supports DVI-D with max. resolution up to 1920x1200 @
|
|
60Hz |
|
• Supports Accelerated Media Codecs: HEVC, VP8, VP9 |
|
|
• Supports HDCP with DVI-D Port |
|
|
• Supports Full HD 1080p Blu-ray (BD) playback with DVI-D |
|
|
|
Port |
Audio |
• |
7.1 CH HD Audio (Realtek ALC887 Audio Codec) |
|
* To configure 7.1 CH HD Audio, it is required to use an HD |
|
|
front panel audio module and enable the multi-channel audio |
|
|
feature through the audio driver. |
|
|
• |
Supports Surge Protection |
|
• |
ELNA Audio Caps |
LAN |
• |
Gigabit LAN 10/100/1000 Mb/s |
|
• Giga PHY Intel® I219V |
|
|
• Supports Wake-On-LAN (Supported on Black PCIe Slots |
|
|
|
only) |
|
• |
Supports Lightning/ESD Protection |
|
• Supports Energy Efficient Ethernet 802.3az |
|
|
• |
Supports PXE |
Rear Panel |
• |
1 x PS/2 Mouse Port |
I/O |
• |
1 x PS/2 Keyboard Port |
• 1 x DVI-D Port
• 4 x USB 2.0 Ports (Supports ESD Protection)
• 2 x USB 3.0 Ports (Supports ESD Protection)
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)
• HD Audio Jacks: Line in / Front Speaker / Microphone
English
3
English
Storage |
• 4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and |
|
Hot Plug* |
|
* If M2_1 is occupied by a SATA-type M.2 device, SATA3_0 will |
|
be disabled. |
|
• 1 x M.2 Socket, supports M Key type 2230/2242/2260/2280 |
|
M.2 SATA3 6.0 Gb/s module |
Connector • 1 x Print Port Header
•1 x COM Port Header
•1 x TPM Header
•1 x Chassis Intrusion and Speaker Header
•1 x CPU Fan Connector (4-pin)
*The CPU Fan Connector supports the CPU fan of maximum 1A (12W) fan power.
•2 x Chassis Fan Connectors (4-pin)
•1 x 24 pin ATX Power Connector
•1 x 8 pin 12V Power Connector
•2 x PCIe Power Connectors
•1 x SATA Power Connector
•1 x Front Panel Audio Connector
•1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports ESD Protection)
•1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports ESD Protection)
BIOS |
• |
AMI UEFI Legal BIOS with multilingual GUI support |
Feature |
• |
ACPI 5.0 Compliant wake up events |
|
• |
SMBIOS 2.7 Support |
|
• CPU, DRAM, PCH 1.05V Voltage multi-adjustment |
|
Hardware |
• |
CPU/Chassis temperature sensing |
Monitor |
• |
CPU/Chassis Fan Tachometer |
|
• CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by |
|
|
|
CPU temperature) |
|
• CPU/Chassis Fan multi-speed control |
|
|
• |
CASE OPEN detection |
|
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore |
|
4
H110 Pro BTC+
OS |
• Microsoft® Windows® 10 64-bit (For 7th Gen Intel® CPU) |
|
• Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64- |
|
bit (For 6th Gen Intel® CPU) |
|
* To install Windows® 7 OS, a modified installation disk with |
|
xHCI drivers packed into the ISO file is required. Please refer to |
|
page 34 or more detailed instructions. |
|
* For the updated Windows® 10 driver, please visit ASRock’s |
|
website for details: http://www.asrock.com |
Certifica- |
• FCC, CE |
tions |
|
* For detailed product information, please visit our website: http://www.asrock.com
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
English
5
1.3 Motherboard Layout
Keyboard PS 2 |
|
Mous e |
PS2 |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
ATX12V1 |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DVI1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
USB 2.0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
T: USB1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
B: USB2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
USB 3.0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
T: USB1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
B: USB2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
USB 2.0 |
|
Top: |
|
|
|
|
|
|
|
|
|
|||||
|
T: USB3 |
|
|
|
|
|
|
|
|
|
|
||||||
|
B: USB4 |
|
RJ-45 |
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
LAN |
|||||||
|
|
|
|
|
|
|
|
|
|
||||||||
MI Bottom: CI N |
|
FRON Center: T |
|
LINE Top: IN |
PCIE_PWR1 |
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CHA_FAN2 |
|
|
|
|
|
|
|
|
|
|
|
|
PCIE1_1 |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PCIE1 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO |
|
|
|
|
|
PCIE2_1 |
||||||||
|
|
|
CODEC |
|
|
|
|
|
|||||||||
PCIE3_1
PCIE3
PCIE4_1
PCIE4
PCIE5_1
PCIE5
PCIE6_1
PCIE6
PCIE7_1
CPU_FAN1
A1(64bit,288-pinmodule) |
B1(64bit,288-pinmodule) |
|
DDR4 |
DDR4 |
ATXPWR1 |
H110 Pro BTC+ |
|
|
M2 1 |
|
|
PCI Express 3.0
PCIE2
CMOS
Battery
CHA_FAN1
RoHS
Super
I/O
Intel
H110
BIOS
ROM
Front USB 3.0
|
1 |
|
TPMS1 |
SATA3 0 |
SATA3 1 |
SATA3 2 |
SATA3 3 |
1 |
|
CLRMOS2 |
|
|
SPK_CI1 |
1
PCIE_PWR2 |
COM1 |
USB3_3_4 |
|
HD_AUDIO1 |
LPT1 |
USB_5_6 |
|
SATA_POW1 |
PLED PWRBTN |
1 |
1 |
1 |
1 |
|
|
1 |
1 |
HDLED RESET
PANEL1
English
6
H110 Pro BTC+
No. Description
1ATX 12V Power Connector (ATX12V1)
2CPU Fan Connector (CPU_FAN1)
32 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
4ATX Power Connector (ATXPWR1)
5Chassis Fan Connector (CHA_FAN1)
6TPM Header (TPMS1)
7SATA3 Connector (SATA3_1)
8SATA3 Connector (SATA3_0)
9SATA3 Connector (SATA3_3)
10SATA3 Connector (SATA3_2)
11Chassis Intrusion and Speaker Header (SPK_CI1)
12Clear CMOS Jumper (CLRMOS2)
13System Panel Header (PANEL1)
14USB 2.0 Header (USB_5_6)
15USB 3.0 Header (USB3_3_4)
16Print Port Header (LPT1)
17COM Port Header (COM1)
18SATA Power Connector (SATA_POW1)
19PCIe Power Connector (PCIE_PWR2)
20Front Panel Audio Header (HD_AUDIO1)
21PCIe Power Connector (PCIE_PWR1)
22Chassis Fan Connector (CHA_FAN2)
English
7
1.4 I/O Panel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
1 |
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
4 |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 |
9 |
8 |
|
7 |
6 |
5 |
No. |
Description |
|
|
No. |
Description |
|
|
|
|
|
|
||||
1 |
PS/2 Mouse Port |
|
|
6 |
USB 2.0 Port (USB_34) |
|
|
2 |
LAN RJ-45 Port* |
|
|
7 |
USB 3.0 Ports (USB3_1_2) |
|
|
3 |
Line In (Light Blue)** |
|
8 |
USB 2.0 Port (USB_12) |
|
||
4 |
Front Speaker (Lime)** |
|
9 |
DVI-D Port |
|
|
|
5 |
Microphone (Pink)** |
|
10 |
PS/2 Keyboard Port |
|
||
|
|
|
|
|
|
|
|
*There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED SPEED LED
LAN Port |
|
|
|
|
|
|
Activity / Link LED |
|
Speed LED |
|
|
||
|
|
|
||||
Status |
|
Description |
|
Status |
|
Description |
Off |
|
No Link |
|
Off |
|
10Mbps connection |
|
|
|
||||
Blinking |
|
Data Activity |
|
Orange |
|
100Mbps connection |
On |
|
Link |
|
Green |
|
1Gbps connection |
|
|
|
|
|
|
|
English
8
H110 Pro BTC+
** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multichannel audio feature through the audio driver.
Please set Speaker Configuration to “7.1 Speaker”in the Realtek HD Audio Manager.
Function of the Audio Ports in 7.1-channel Configuration:
Port |
|
Function |
Light Blue (Rear panel) |
|
Rear Speaker Out |
|
||
Lime (Rear panel) |
|
Front Speaker Out |
Pink (Rear panel) |
|
Central /Subwoofer Speaker Out |
Lime (Front panel) |
|
Side Speaker Out |
English
9
Chapter 2 Installation
This is an ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.
•Make sure to unplug the power cord before installing or removing the motherboard components. Failure to do so may cause physical injuries and damages to motherboard components.
•In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.
•Hold components by the edges and do not touch the ICs.
•Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
•When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
English
10
H110 Pro BTC+
2.1Installing the CPU
1.Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.
2.Unplug all power cables before installing the CPU.
1
A
B
2
English
11
3 |
4 |
5
English
12
H110 Pro BTC+
Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
English
13
2.2 Installing the CPU Fan and Heatsink
1 |
2 |
N _FA PU C
English
14
H110 Pro BTC+
2.3 Installing Memory Modules (DIMM)
This motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology.
1.For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.
2.It is unable to activate Dual Channel Memory Technology with only one memory module installed.
3.It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot; otherwise, this motherboard and DIMM may be damaged.
The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
English
15
1
2
3
English
16
H110 Pro BTC+
2.4 Expansion Slots (PCI Express Slots)
There are 13 PCI Express slots on the motherboard.
Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
PCIe slots:
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards. PCIE1_1/PCIE1/PCIE2_1/PCIE3_1/PCIE3/PCIE4_1/PCIE4/PCIE5_1/PCIE5/ PCIE6_1/PCIE6/PCIE7_1 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width graphics cards.
1. Please connect the SATA power connector and PCIe power connectors to the power supply when three graphics cards are installed on this motherboard.
2. 12V power supply can only provide 1.2A current in the white PCIe slots.
English
17
Loading...