3M FT-30 Qualitative Fit Test Kit, Bitter 05/26/15
Safety Data Sheet
Copyright,2015,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
Document Group: |
07-6220-3 |
Version Number: |
8.01 |
Issue Date: |
05/26/15 |
Supercedes Date: |
10/09/14 |
Product identifier
3M FT-30 Qualitative Fit Test Kit, Bitter
ID Number(s):
70-0707-0964-0, HB-0043-2362-0, HB-0043-2363-8
Recommended use
Qualitative Fit Test Kit, Bitter
Supplier's details |
|
MANUFACTURER: |
3M |
DIVISION: |
Personal Safety Division |
ADDRESS: |
3M Center, St. Paul, MN 55144-1000, USA |
Telephone: |
1-888-3M HELPS (1-888-364-3577) |
Emergency telephone number
1-800-364-3577 or (651) 737-6501 (24 hours)
This product is a kit or a multipart product which consists of multiple, independently packaged components. A Safety Data Sheet (SDS), Article Information Sheet (AIS), or Article Information Letter (AIL) for each of these components is included. Please do not separate the component documents from this cover page. The document numbers for components of this product are:
07-6198-1, 07-6218-7
DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M
________________________________________________________________________________________________________
Page 1 of 2
3M FT-30 Qualitative Fit Test Kit, Bitter 05/26/15
3M USA SDSs are available at www.3M.com
________________________________________________________________________________________________________
Page 2 of 2
FT-31, Denatonium Benzoate Sensitivity Solution |
05/21/18 |
Safety Data Sheet
Copyright,2018,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
Document Group: |
07-6198-1 |
Version Number: |
15.00 |
Issue Date: |
05/21/18 |
Supercedes Date: |
09/25/17 |
SECTION 1: Identification
1.1. Product identifier
FT-31, Denatonium Benzoate Sensitivity Solution
Product Identification Numbers |
|
|
|
ID Number |
UPC |
ID Number |
UPC |
70-0707-0965-7 |
+H-44446-9965N-0 |
|
|
1.2. Recommended use and restrictions on use
Recommended use
Sensitivity Test Solution.
1.3.Supplier’s details MANUFACTURER: 3M
DIVISION: |
Personal Safety Division |
ADDRESS: |
3M Center, St. Paul, MN 55144-1000, USA |
Telephone: |
1-888-3M HELPS (1-888-364-3577) |
1.4. Emergency telephone number
1-800-364-3577 or (651) 737-6501 (24 hours)
SECTION 2: Hazard identification
2.1. Hazard classification
Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200.
2.2. Label elements Signal word
Not applicable.
Symbols
Not applicable.
Pictograms
Not applicable.
__________________________________________________________________________________________
Page 1 of 8
FT-31, Denatonium Benzoate Sensitivity Solution |
05/21/18 |
SECTION 3: Composition/information on ingredients
Ingredient |
C.A.S. No. |
% by Wt |
|
WATER |
7732-18-5 |
90 - 100 Trade Secret * |
|
SODIUM CHLORIDE |
7647-14-5 |
3 - |
10 Trade Secret * |
DENATONIUM BENZOATE |
3734-33-6 |
0 - |
1 Trade Secret * |
*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret.
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation:
Remove person to fresh air. If you feel unwell, get medical attention.
Skin Contact:
No need for first aid is anticipated.
Eye Contact:
No need for first aid is anticipated.
If Swallowed:
No need for first aid is anticipated.
4.2.Most important symptoms and effects, both acute and delayed
See Section 11.1. Information on toxicological effects.
4.3.Indication of any immediate medical attention and special treatment required
Not applicable
SECTION 5: Fire-fighting measures
5.1. Suitable extinguishing media
Non-combustible. Use a fire fighting agent suitable for surrounding fire.
5.2.Special hazards arising from the substance or mixture
None inherent in this product.
5.3.Special protective actions for fire-fighters
No special protective actions for fire-fighters are anticipated.
SECTION 6: Accidental release measures
6.1.Personal precautions, protective equipment and emergency procedures
Observe precautions from other sections.
6.2.Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially
__________________________________________________________________________________________
Page 2 of 8
FT-31, Denatonium Benzoate Sensitivity Solution |
05/21/18 |
available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with water. Seal the container. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
For industrial or professional use only. Do not eat, drink or smoke when using this product. Avoid release to the environment.
7.2. Conditions for safe storage including any incompatibilities
No special storage requirements.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational exposure limits
No occupational exposure limit values exist for any of the components listed in Section 3 of this SDS.
8.2. Exposure controls
8.2.1. Engineering controls
No engineering controls required.
8.2.2. Personal protective equipment (PPE)
Eye/face protection
None required.
Skin/hand protection
No protective gloves required.
Respiratory protection
None required.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties |
|
|
General Physical Form: |
Liquid |
|
Odor, Color, Grade: |
Clear, odorless solution with a bitter taste. Freezing point = -4 |
|
Odor threshold |
degrees Centigrade |
|
No Data Available |
|
|
pH |
Approximately 6.52 Units not avail. or not appl. |
|
Melting point |
Not Applicable |
|
Boiling Point |
>=212 ºF |
|
Flash Point |
No flash point |
|
Evaporation rate |
Not Applicable |
|
Flammability (solid, gas) |
Not Applicable |
|
Flammable Limits(LEL) |
Not Applicable |
|
__________________________________________________________________________________________ |
|
|
|
Page 3 of |
8 |
FT-31, Denatonium Benzoate Sensitivity Solution |
05/21/18 |
Flammable Limits(UEL) |
Not Applicable |
Vapor Pressure |
18 mmHg [@ 20 ºC] |
Vapor Density |
Not Applicable |
Density |
1.034 g/ml |
Specific Gravity |
1.034 [Ref Std:WATER=1] |
Solubility in Water |
Complete |
Solubility- non-water |
No Data Available |
Partition coefficient: n-octanol/ water |
No Data Available |
Autoignition temperature |
Not Applicable |
Decomposition temperature |
No Data Available |
Viscosity |
Not Applicable |
Molecular weight |
Not Applicable |
|
|
SECTION 10: Stability and reactivity |
|
10.1. Reactivity
This material is considered to be non reactive under normal use conditions.
10.2.Chemical stability
Stable.
10.3.Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4.Conditions to avoid
None known.
10.5.Incompatible materials
None known.
10.6.Hazardous decomposition products
Substance |
Condition |
None known. |
Not Specified |
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole.
11.1. Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Inhalation:
Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
__________________________________________________________________________________________
Page 4 of 8