AFWASAUTOMAAT
LAVA-VAISSELLE
GESCHIRRSPÜLER
DISHWASHER
ZDI 6142
NL |
Gebruiksaanwijzing - (deel 2) |
bladzijde 2 |
|
||
F |
Notice d’utilisation - (partie 2) |
page 9 |
|
||
D |
Bedienungsanleitung - (Teil 2) |
Seite 16 |
|
||
GB |
Instruction book - (part 2) |
page 23 |
|
|
|
Description of the appliance
1.Upper basket stop
2.Water hardness switch
3.Salt container
4.Detergent dispenser (type A / type B)
5.Control panel
6. Rating plate
7.Rinse aid dispenser (type A / type B)
8.Filters
9.Lower spray arm
10. Upper spray arm
11.Upper basket
IN143
The control panel
23
In daily use
●Check if it’s necessary to refill with special salt or rinse aid
●Load cutlery and dishes into the dishwasher.
●Fill with dishwasher detergent .
●Select a wash programme suitable for the cutlery and dishes.
●Start the wash programme.
Loading cutlery and dishes
Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.
●Before loading the dishes, you should:
-Remove large left-overs.
-Soften remnants of burnt food in pans
●When loading the dishes and cutlery, please note:
-Dishes and cutlery must not impede the rotation of the spray arms .
-Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base.
-Dishes and items of cutlery must not lie inside one another, or cover each other.
-To avoid damage to glasses, they must not touch.
-Lay small objects in the cutlery basket.
For washing in the dishwasher the following cutlery/dishes
are not suitable:
-Cutlery with wooden, horn, china or mother-of-pearl handles
-Plastic items that are not heat resistant
-Older cutlery with glued parts that is not temperature resistant
-Bonded cutlery items or dishes
-Pewter or copper items
-Lead crystal glass
-Steel items subject to rusting
-Wooden platters
-Items made from synthetic fibres
Open the door and slide out the baskets to load the dishes.
The lower basket
The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the upper spray arm can turn freely.
UI48 |
UI21 |
The cutlery basket
Long bladed knives stored in an upright position are a potential hazard.
Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives.
are of limited suitability:
-Only wash stoneware in the dishwasher if it is specifically marked as being dishwasher-safe by the manufacturer.
-Glazed patterns may fade if machine washed frequently
-Silver and aluminium parts have a tendency to discolour during washing. Left-overs, e.g. egg white, egg yolk and mustard often cause discolouring and staining on silver. Therefore always clean left-overs from silver immediately, if it is not to be washed straight after use.
-Some types of glass can become dull after a large number
of washes
Cutlery should be placed in the removable cutlery basket with the handles facing downwards. If the handles protrude from
the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking together.
For best results we recommend you to use the cutlery grids provided (if the size and dimensions of the cutlery allow it).
The cutlery basket is in two parts which can be separated to give greater loading
flexibility. To separate the two parts, slide them horizontally in opposite directions and
pull them apart. To reassemble, reverse the procedure.
UI63 |
UI62 |
24
The upper basket
The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses.
Arrange items on and underneath the cup racks so that water can reach all surfaces.
Glasses with long stems can be placed upside down in the cup racks.
Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move.
US64 |
In case that plates are loaded in the upper basket:
load them starting from the rear positions of the basket;
tilting them slightly forwards and avoiding the front
positions near the door.
US71
Before closing the door, ensure that the spray arms can rotate freely.
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position.
|
|
|
Maximum height of the dishes in |
||
|
|
|
upper basket |
lower basket |
|
|
|
|
|
|
|
|
|
|
|
|
|
With upper basket raised |
20 cm |
31 cm |
|
||
|
|
|
|
||
With upper basket lowered |
25 cm |
27 cm |
|
||
|
|
|
|
|
|
To move to the higher position proceed as follows:
1.Move the front runner stops (A) of the upper basket outwards and slide the basket out.
2.Refit the basket in the higher position and replace the stops
(A)in their original position.
RC01 |
After loading your machine always close the door, as an open door can be a hazard.
25
Loading...