DTD-T
Digital TD Controller for NEXO
PS Series, ID Series and GeoM6.
www.nexo.fr
The new generation of NEXO Digital
TD Controllers offers the same sound
quality and processing algorithm as the
high end NXAMP range at a very
competitive price.
DTD main features
Speaker controller for PS Series, ID
Series and GeoM6 providing digital
processing from the NXAMP technology
(Crossover, EQ, time alignment and
speaker protections).
High-end Balanced Stereo Analog
inputs, AES input, USB input and optionally
Dante
tm
.
High-end Balanced Analog outputs for
Main (Stereo) and Sub (mono sum).
Automatic Amplifier Sensing with no
setting required from user.
Simple control from the front panel
(Sub Gain, Main Gain, Crossover mode) or
advanced control using mini-USB port and
the dedicated Dory software (Android,
Mac, PC).
The DTD is a unique tool, combining advanced
signal processing, inherited from the NXAMP, with
an unmatched ease of use.
Flexible Inputs system
The DTD offers efficient speaker processing with
unmatched input flexibility: On top of the high-end
Stereo balanced inputs, an AES input and a USB
input (driverless USB audio playback from many
OS) will allow the DTD to be connected quickly in
any situation. Dante
tm
input is also available as an
option (see ordering information).
State-of-the-Art signal processing
Despite its ease of use, the DTD delivers state-of-
the-art audio processing, offering high precision EQ
and Linear Acoustic Phase algorithm, phase-
compatible with other Nexo speakers, inherited
from the NXAMP range of powered TDcontrollers.
The DTD uses high-end AD and DA converters, 64
bits DSPs, and finally an analog IN to analog OUT
dynamic range of more than 112 dB, while
distortion is kept under 0.001%.
Installation and Touring versions
The Digital TDcontroller range is composed of two
models, both housed in a rugged low depth steel
19” case and featuring a universal power supply.
The DTD-T is the Touring version, with its analog
input and output connectors (XLR and Speakons)
on the front panel, thus saving the cost of and
room for an extra patch panel unit. The front panel
display shows the current Speaker name, two
hardware knobs for Sub/Main output gain, and a
switch for selecting Wideband, Crossover or User
(i.e. custom) mode.
The DTD-I is the Installation version, with all
connectors (except mini-USB) at the back on the
barrier strip. There is no hardware control;
everything is set up from a PC/Mac computer or
Android phone/tablet (with OTG support)
connected on the mini-USB port, allowing the
settings to be locked and thus preventing any
accidental changes.
User Mode
While front panel switch and knobs allow basic
setup of the DTD-T without the need for a
computer, the User Mode that can be set up
through the mini-USB port offers more possibilities:
Speaker and Sub model selection.
Crossover Frequency selection.
Patch/Gain/Delay for each output.
User EQ (2x 8 bands parametric EQ)
User compressor/limiter for each output.
Settings lock with password.
Updatable firmware
The mini-USB port allows the user to update the
unit firmware from the Dory software, to add new
functions or to download new NEXO speaker
presets.
DTD and companion amplifier DTDAMP with Dory remote
control software running on an Android tablet.
DTD
Digital TD Controller Data Sheet
DTD-T
TD CONTROLLER
LATIGID
DTD-I
TD CONTROLLER
LATIGID
Loading...