IMPORTANT: Before proceeding, please ensure the correct Epson (OEM) printer driver and SubliJetIQ WinProle have been installed. For assistance with driver and prole installation, refer to the
Installation Guide.
NOTE: Your screens and menus may differ depending on the version of software and operating system
you are using. However, the settings will be the same.
Photoshop Workspace Setup
1.) Begin by opening Photoshop. In the menu bar, click Edit > Color Settings (see FIGURE 1).
1
2
FIGURE 1
PAGE 1 of 6 >>
v20120713
SubliJet-IQ: Epson WorkForce Pro WP-4015 DN - WinProfile
Setup and Print Guide - Photoshop CS6
2.) In the Color Settings window, match your settings to those shown below (see FIGURE 2).
P
B
C
D
E
I
J
L
M
N
A
O
K
F
G
H
FIGURE 2
A. Settings: Custom
B. RGB: Adobe RGB (1998)
C. CMYK: U.S. Web Coated (SWOP) v2
D. Gray: Dot Gain 20%
E. Spot: Dot Gain 20%
F. RGB: Convert to Working RGB
G. CMYK: Preserve Embedded Proles
H. Gray: Preserve Embedded Proles
PAGE 2 of 6 >>
SubliJet-IQ: Epson WorkForce Pro WP-4015 DN - WinProfile
Setup and Print Guide - Photoshop CS6
I. Prole Mismatches: Check Ask When Opening and also check Ask When Pasting
J. Missing Proles: Check Ask When Opening
K. If Conversion Options are not visible, click More Options
L. Engine: Adobe (ACE)
M. Intent: Perceptual
N. Check Use Black Point Compensation
O. Once your settings match, click Save. This will open the Save window (see FIGURE 3).
NAME your new preset in the File Name eld and click Save when complete.
1
FIGURE 3
P. Click OK to complete setup (see FIGURE 2)
2
PAGE 3 of 6 >>
SubliJet-IQ: Epson WorkForce Pro WP-4015 DN - WinProfile
Setup and Print Guide - Photoshop CS6
3. At the top of the application click File > New… (Ctrl+N). In the New Document window, match your
settings to the ones show below (see FIGURE 4).
D
A
B
C
FIGURE 4
A. Color Mode: RGB Color
B. Click the down arrows next to Advanced to view Color Prole:
C. Color Prole: Adobe RGB (1998)
D. Click OK to save your changes and continue
4. When opening or importing images in Photoshop, you may encounter an Embedded Prole Mismatch
warning. In this instance, select the radio button for Convert document’s colors to the working space.
Click OK to continue (see FIGURE 5).
1
2
FIGURE 5
NOTE: Always choose to use or convert to Adobe RGB (1998).
PAGE 4 of 6 >>
SubliJet-IQ: Epson WorkForce Pro WP-4015 DN - WinProfile
Setup and Print Guide - Photoshop CS6
5. Once an image has been opened or imported in Photoshop, you will need to ensure that RGB color mode
has been selected. In the menu bar, click Image > Mode > RGB Color. A check mark should now be
visible beside RGB Color (see FIGURE 6).
1
2
3
FIGURE 6
Printing from Photoshop with the Epson WP-4015
6.) With the correct color settings entered, you are now ready to print. In the Menu Bar, click File > Print. In
the Print window, match your settings to those shown below (see FIGURE 7).
A
H
B
G
FIGURE 7
A. Printer: EPSON WP-4015 Series
B. Click the drop-down arrow to view Color Management options
C. Color Handling: Photoshop manages colors
C
E
F
D
I
PAGE 5 of 6 >>
SubliJet-IQ: Epson WorkForce Pro WP-4015 DN - WinProfile
Setup and Print Guide - Photoshop CS6
D. Printer Prole: select the appropriate ICC prole for your printer
NOTE: If the prole is not visible in the drop-down menu, try restarting Photoshop. If the
prole is still missing after restarting Photoshop, refer to the Installation Guide.
E. Select: Normal Printing
F. Rendering Intent: Perceptual
G. Check Black Point Compensation
H. Click Print Settings (see FIGURE 7). This will open the Properties window (see FIGURE 8).
a
FIGURE 8
a. Select your previously saved setting either Photo or Graphics
NOTE: If your previously saved setting is not visible in the drop-down menu, refer to
the Conguration Guide.
b. Click OK to continue
I. Click Print when you are ready to print your image (see FIGURE 7)
Congratulations! Photoshop setup is now complete. Remember to select the Epson WP-4015 Series each
time you are ready to print.
b
PAGE 6 of 6 >>
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.