Xpres ChromaLuxe Panel User Manual
ChromaLuxe Panels
®
STEP BY STEP
Step 1
Print your design in mirror
image, on Sublimation
paper. Use the suggested
settings and the correct
ICC profile for your printer.
Step 2
Remove any packaging
and protective plastic film
from the ChromaLuxe
Panels.
Step 3
Secure the transfer (face
down onto the surface of
the panel) by heat taping
the paper loosely around
the back of the panel.
Step 4
Place a silicon sheet on
the bottom platen of the
press, place the panel
(face up, paper face down)
onto the press and position
a sheet of *Endura Fabric
(XP5411) above the panel
to cover what is being
pressed.
Step 4
With panels smaller than
A3 in size: press at 200°C
for 90 seconds. With
panels larger than A3 in
size: press at 180°C for
300 seconds.
XP5300R - Rectangular Panels XP5300S - Square Panels
XP5300C - Circular Panels
TRANSFER SETTINGS
SIZE
TIME
TEMPERATURE
PRESSURE
PEEL
3 Tips for Best Results
*Due to the high temperatures needed to press the panels, the edges can
become slightly brittle. To minimise the risk of chipping, Xpres strongly
recommends the following precautions.
1. Heat tape your sublimation paper loosely around the back of the
ChromaLuxe Panel on two opposing edges.
2. Cover what is being pressed with a sheet of Endura Fabric - XP5411.
3. Carefully remove the panel from the press and place on a flat surface
(which will not burn) to allow the panel to fully cool before peeling
away the sublimation paper.
Smaller than A3 Larger than A3
90 seconds
200°C
Light
Cold
300 seconds
180°C
Light
Cold
Step 5
Be very careful whilst
moving the panel from the
press to a flat surface to
cool, before removing the
paper.
PLEASE NOTE: The sellers and manufacturers maximum obligation shall be to replace any product that
has been proven to be defective. Neither the seller nor the manufacturer of the ChromaLuxe Panel
range shall be liable for any injury direct or consequential, arising out of the use of, or inability to use
this range.
Oakridge Park, Trent Lane
Castle Donington, Derby
DE74 2PY
Phone:
Web:
E-mail:
Support:
01332 855 085
www.xpres.co.uk
sales@xpres.co.uk
www.xprestechnical.co.uk
Loading...