Epson Stylus Pro 7890 / 9890 - WinProfile
Setup and Print Guide - Elements 8, 9, 10 & 11
IMPORTANT: Before proceeding, please ensure the correct Epson (OEM) printer driver and SubliJet-IQ
Pro Photo WinProfile have been installed. For assistance with driver and profile installation, refer to the Installation Guide.
NOTE: Your screens and menus may differ depending on the version of software and operating system you are using. However, the settings will be the same.
Photoshop Elements Workspace Setup
1.) Begin by opening Photoshop Elements. In the menu bar, click Edit > Color Settings (see FIGURE 1).
1
2
FIGURE 1
PAGE 1 of 4 >>
v20130613
SubliJet-IQ Pro Photo: Epson Stylus Pro 7890 / 9890 - WinProfile
Setup and Print Guide - Elements 8, 9, 10 & 11
2.) The Color Settings window should now be open. Match your settings to those shown below: (see FIGURE 2)
B
A
FIGURE 2
A.Select the radio button for No Color Management
B.Click OK to save your changes and continue
3.Once an image has been opened or imported in Elements, you will need to ensure that RGB color mode has been selected. In the menu bar, click Image > Mode > RGB Color. A check mark should now be visible beside RGB Color (see FIGURE 3).
1
2
3
FIGURE 3
PAGE 2 of 4 >>
Loading...