Ricoh GXe3300N
Sublimation Manual
dome |
gem tec™ |
Sales: 01332 855 085 |
Tehcnical Support: 01332 858 333 |
www.xprestechnical.co.uk
Index
Contents
Ricoh GXe3300N Installation |
P.1 |
|
|
Driver Setup |
P.6 |
|
|
|
|
CorelDRAW Setup (CorelDRAW 10 - X4 & X5) |
P.10 |
|
|
|
|
Working with templates |
P.18 |
|
|
CorelDRAW tools |
P.20 |
|
|
CorelDRAW tasks |
P.22 |
|
|
|
|
Troubleshooting / Tips |
P.23 |
|
|
|
|
Installation
Installation Guide - Ricoh Driver and Inks
1.Unpack and setup the printer as described in the printer setup instructions. Have the printer plugged into a power outlet but not turned on. IMPORTANT: DO NOT INSTALL THE STANDARD RICOH CARTRIDGES.
Ink Cartridge Setup
CAUTION: DO NOT INSTALL THE STANDARD RICOH INKS BEFORE INSTALLING SUBLIMATION INK.
Do not power ON the printer before installing the cartridges.
Remove the Sublimation cartridges from the packaging.
Open front cover to reveal ink cartridge compartment
Insert the Sublimation cartridges in the indicated order. Press each cartridge body until it engages securely.
Please Note: Do not shake or agitate the ink carts before or after installation.
Cartridge Order: Black, Cyan, Magenta & Yellow
Once all cartridges are in place, close the cartridge cover.
Note: DO NOT TURN ON THE POWER FOR THE PRINTER UNTIL THE DRIVER INSTALLATION REQUIRES YOU TO.
1
Installation
2.Insert the Ricoh CD into the CD/DVD Rom driver .
3.Select a language for the interface & click OK.
4.Click Quick Install for USB, and then click next.
5.Click ‘I accept the agreement’ and click next
2
Installation
6.Click ‘Next’ to confirm the driver installation
7.The installation process will now begin.
8.You will be prompted to turn the printer On to allow detection of the Ricoh GXe3300.
3
Installation
9.Once the printer has been detected you will be shown the following dialogue box, asking if you would like to set the printer as the default printer. You can select either Yes or No depending on which printer you prefer to be you default printer.
10. Click next in the dialogue box below.
11.You will now be shown the following information stating that the printer has been installed successfully, Click Next.
If the information shown states that the installation failed, restart the PC and re-install the driver.
4
Installation
12. The system will now install the user manual, and then show the following window to confirm the install is complete.
Click Finish
5
Driver Setup
To setup the Ricoh GXe3300 Driver ready for Sublimation printing using Corel Draw follow the steps below:
1.Click Start > Control Panel > Printers / Devices & Printers (’Printers and Faxes’ if using windows XP or previous operating systems).
Right click on the GelSprinter GXe3300 option and select Printing Preferences as shown below.
2.If you see the window below, click OK, and then click OK on the second window that appears. (If you do not see this option skip to step 3).
6
Loading...