XPiQ inc PU40-10SL, PU40-12SL, PU40-13SL, PU40-23SL, PU40-24SL Datasheet

			Switching Power Supply
	XPiQ inc.		40 Watts
			PU40 Series
	Intelligent Design Quality Product
		•
			Built-in EMI Filter
			•
			100% Burn-in
			•
			Input Surge Current Protection
			•
			Industry Standard 3.0” x 5.0” x 1.2” Size
			•
			Universal Input Voltage (85-264 VAC)

Specification

All specifications typical at nominal line, full load and 25°C

Input

Input Voltage	•	85 to 264		VAC/115-280 VDC
Input Frequency	•	47 to 440		Hz
Input Current	•	1.2A	(rms for 115 VAC
		0.7A	(rms) for 230 VAC

Output

Output Voltage:	•	See Rating Charts
Output Current	•	See Rating Charts
Output Power Range	•	0 to 40 Watts
Ripple and Noise	•	1% peak to peak max.
Overvoltage	•	Provided on output #1 only;
Protection:		set at 112-132% of its nominal
		output voltage
Overcurrent	•	All outputs protected to short
Protection:		circuit conditions
Temperature	•	All outputs ±0.04%/°C
coefficient:		maximum

General

Efficiency	•	65% minimum at 40 watt output
Hold-up time	•	10 msec minimum
Line Regulation	•	±0.5% maximum at full load
Inrush Current	•	15A at 115		VAC or
		30A at 240		VAC at 25°C cold start
Withstand Voltage	•	3000	VAC from input to output
		1500	VAC from input to ground
Insulation Resistance	•	10 Mohm minimum from
		output to ground

Environmental

Operating	•	0°C to +70°C*
Temperature
Storage	•	-40°C to +85°C
Temperature
MTBF	•	100,000 hours minimum at full load
		at 25°C ambient
EMI Requirement	•	Meets the conducted limits of
		a) FCC 20780 Level B
		b) CISPR 22 (EN 55022) Level B
Safety Requirements	•	Approved to:
		a) UL 1950
		b) CSA 22.2 #234
		c) TUV per EN60950 (IEC 950)

* Derate linearly from 100% load at 50°C to 50% load at 70°C

•	PH: 508	429.9883	•
	FAX: 800	226.2100
63 www.XP-iQ.com	Email: [e-mail]
	Holliston, MA 01746 USA