XPiQ inc JTA2048S3V3, JTA2048S12, JTA2048S05, JTA2048D03, JTA2048D01 Datasheet

DC/DC Converters

20 Watts			XPiQ inc.
JTA20 Series			Intelligent Design Quality Product
	•
		Small Size 1.6” x 2.0” x 0.45”
			•
		PRELIMINARY
		Ultra Wide 4:1 Input
			•
		Full Power to +71 °C
			•
			2003
		Industry Standard Pin Out
		Q3	•
		Single & Dual Outputs
			•
		Overvoltage & Overcurrent Protection
			•
		UL Safety Approvals

Specification

	Input		General
	Input Voltage	• 9-36 VDC	Efficiency	•	See table
		18-75 VDC	MTBF	• 1,000,000 hrs minimum per
	Input Current	• 2.9 A max at 9 VDC input, 20 W output
					MIL-HDBK-217F
	Remote ON/OFF	• ON = Logic High or Open,	Isolation Voltage	• 1500 VDC Input to Output
		OFF = Logic Low or shorted to -Vin	Package Style	• Copper case with non-conductive base
	Output		Size	• 2.00” x 1.60” x 0.45”
			Weight	•	50 grams approx

Output Voltage	•	See Table
Output Power	•	20 Watts
Output Voltage	•	±10%
Adjustment
Minimum Load	• 0 minimum load required
Line Regulation	•	±1% maximum
Load Regulation	• ±1% maximum for single output
		±2% maximum for dual output
Setpoint Accuracy	•	±2%
Ripple & Noise	• 50 mV pk-pk for single output
		75 mV pk-pk for dual output
Transient Response	•	4% max deviation,
		recovering to 1% of final value in less
		than 500 µs after a 25% load change
Temperature	•	±0.02%/°C
Coefficient
Overvoltage	•	See table
Protection
Overcurrent	• Continuous with auto recovery
Protection

Environmental

Operating	•	-25 °C to +100 °C derate from
Temperature		100% load at +71 °C to 0% load
		at +100 °C
Cooling	•	Convection cooled
Storage	•	-55 °C to +105 °C
Temperature
Humidity	•	5-95% RH non-condensing

EMC & Safety

Safety Approvals	•	UL/cUL 1950
EMI/EMC	•	EN55022 Class B conducted

* Preliminary datasheet - see website for current specs

•				PH: 508	429.9883	•
				FAX: 800	226.2100
	www.XPiQ.com			Email: [e-mail]
				Holliston, MA 01746 USA