XPiQ inc JWC00605S2V5, JWC00605S2V0, JWC00605S1V5, JWC00603S2V5, JWC00603S2V0 Datasheet

JWC006.qxd 6/6/03 4:34 pm Page 1

Non-Isolated DC/DC Converters

6 Amps			XPiQ inc.
JWC006 Series			Intelligent Design Quality Product
	•		High Efficiency
			•
			Low Profile
			•
			Parallelable/Current Sharing
			•
			300 A/µs Transient Response
			•
			Single Control Pin
			•
			Safety Approvals UL, cUL, TÜV

Specification

Input

Input Voltage Range	•	3.3 V (3.0 V to 3.6 V) or
		5.0 V (4.5 V to 5.5 V)
Input Current	•	5.5 A at 3.3 V, 5.0 A at 5.0 V
Start-Up Time	•	<10 ms
Remote On/Off	•	Open (logic high) = ON,
		Ground (logic low) = OFF
Input Reflected	•	<250 mV pk-pk
Ripple (V)
Input Reflected	•	<100 mA pk-pk
Ripple (I)

Output

Output Voltage Range •		1.5 V to 3.3 V - See Table
Output Voltage Adj.	•	±10%
Line Regulation	•	See Tables
Load Regulation	•	See Tables
Output Voltage	•	See Tables
Accuracy
Ripple & Noise	•	100 mV pk-pk max for 5.0 V in,
		80 mV pk-pk max for 3.3 V in
Transient Response	•	Max deviation of ±165 mV settling to
		within 95% nominal in <50 µs for
		3 A step load change

General

Efficiency	•	See Table
Isolation Voltage	•	Non-isolated
Size	•	1.756” x 0.500” x 2.480”
Weight	•	5.1 g
MTBF	•	1,500 000 hours calculated
		to Bellcore

Environmental

Operating	•	0 °C to +80 °C (See Derating Curve)
Temperature		Full power to +50 °C
Cooling	•	See derating curve

EMC & Safety

Safety Approvals	•	Approved to UL 60950,
		IEC 60950 and CSA 60950

Overcurrent	•	Operates at 7.5 to 10.0 A
Protection
Short Circuit	•	Operates in Hiccup mode
Protection

•				PH: 508	429.9883	•
				FAX: 800	226.2100
	www.XPiQ.com			Email: [e-mail]
				Holliston, MA 01746 USA