AKM 206 |
GB |
IE |
PRODUCT DESCRIPTION SHEET |
Operation of burners with electric ignition
To light one of the burners:
•Press the relative knob and turn it anticlockwise to the large flame setting .
•At the same time, press the push-button with
a star .
The spark plug gives out a spark that causes the burner to ignite.
If the burner does not ignite, press the pushbutton again.
1.Removable panstand grids
2-3. Medium burners
4.Large burner
5.Small burner
6. Medium burner control knob
7. Medium burner control knob
8. Large burner control knob
9. Small burner control knob
10. Electric ignition button
Symbols
Shaded |
Tap closed |
|
circle |
||
|
||
Large |
Maximum opening/delivery |
|
flame |
||
|
||
Small |
Minimum opening |
|
flame |
or reduced delivery |
Note:
-Should particular local conditions of the delivered gas make the ignition of the burner difficult, it is advisable to repeat the operation
with the knob turned to the small flame setting .
5019 319 61151