Whirlpool AKM 888/WH/01, AKM 896 IX, AKM 611/NB, AKL 378/01 WH, EKV 3482 User manual

1gb59055.fm5 Page 9 Monday, November 11, 2002 6:54 PM

CONTENTS			GB
BEFORE USING THE GLASS CERAMIC HOB	PAGE 10
INSTALLATION	PAGE 10
ELECTRICAL CONNECTION	PAGE 11
ENERGY SAVING TIPS	PAGE 12
PROTECTING THE ENVIRONMENT	PAGE 12
DECLARATION OF CONFORMITY CE	PAGE 12
PRECAUTIONS AND GENERAL
RECOMMENDATIONS	PAGE 12
COOKTOP ACCESSORIES	PAGE 13
CARE AND MAINTENANCE OF THE
GLASS-CERAMIC COOKTOP	PAGE 13
TROUBLESHOOTING GUIDE	PAGE 13
AFTER SALES SERVICE	PAGE 14

9

1gb59055.fm5 Page 10 Monday, November 11, 2002 6:54 PM

BEFORE USING THE GLASS CERAMIC HOB

•To make the most of your new appliances read the users instructions carefully and keep them on hand for consultation in the future.

INSTALLATION

Cooktop

•The cooktop must be set into a worktop between 20 mm and 50 mm thick. There must be nothing between the cooktop and the oven (cross rails, brackets, etc.).

•If the cooktop is to be installed next to a column unit, leave a distance of at least 100 mm from the edge of the cooktop to the side of the column unit.

•Cut an opening in the worktop of the dimensions shown in the Product Description Sheet supplied separately.

N.B.: Remove the protective film before installing the cooktop.

•If the worktop is made of wood, use the supplied spring clips and screws.

1.Position the 4 clips (D) as shown and at the specified dimensions

2.Secure the clips using screws (E).

3.Fit the cooktop into the worktop.

•If the worktop is made of marble, ceramics, natural stone, etc., the cooktop must be secured with brackets (F) code 4819 404 78697 (to be requested from After-Sales Service).

1.Fit the cooktop into the worktop.

2.Position the 4 brackets (F) as shown in the figure, in accordance with the thickness of the worktop.

3.Fix the 4 screws (G) in holes (H).

10