Vizio M556-G4, M656-G4, M706-G3 User Manual

M-Series™

User Manual

Model:

M556-G4, M656-G4 & M706-G3

Table Of Contents

Getting to Know Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	7
Rear Panel—M556-G4 & M656-G4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	8
Rear Panel—M706-G3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	9
Wall-mounting the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	.11.
Using the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	12. .
Completing The First-Time Setup . . . . . . . . . . . . . . . . . . . .	13
Using the On-Screen Menu . . . . . . . . . . . . . . . . . . . . . . . . .	14
Navigating the On-Screen Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	14.
Changing the Input Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	14
Changing the Screen Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	15
Adjusting the Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	16.
Adjusting More Picture Settings. . . . . . . . . . . . . . . . . . . . . . . . . . .	16
Adjusting the Color Temperature . . . . . . . . . . . . . . . . . . . . . . . .	17.
Adjusting the Picture Mode Edit Settings . . . . . . . . . . . . . . . . . .	17.
Saving a Custom Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .	17.
Locking/Unlocking a Custom Picture Mode . . . . . . . . . . . . . . . .	18.
Deleting a Custom Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . .	18
Adjusting the Color Tuner Settings . . . . . . . . . . . . . . . . . . . . . . .	19.
Adjusting the Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	21.
Adjusting the Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	22.
Setting Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	23. .
Setting the Auto Power Off Feature. . . . . . . . . . . . . . . . . . . . . . . .	23
Using the Blank Screen Feature . . . . . . . . . . . . . . . . . . . . . . . . . . .	23
Setting Up Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	24.
Scanning for Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	24.
Skipping Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	24
Listening to Alternate Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	25
Changing the Analog Audio Language. . . . . . . . . . . . . . . . . . . . . .	25

Using Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	.26.
Accessing the Parental Controls Menu . . . . . . . . . . . . . . . . . . . .	26.
Enabling or Disabling Program Ratings . . . . . . . . . . . . . . . . . . . . .	26
Locking and Unlocking Channels . . . . . . . . . . . . . . . . . . . . . . . . . .	26
Blocking and Unblocking Content by Rating. . . . . . . . . . . . . . . . .	26
Setting Up Closed Captioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	27
Changing the Appearance of Digital Closed Captions . . . . . . . .	.27
Changing Input Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	29.
Renaming Devices on the Input Menu . . . . . . . . . . . . . . . . . . . .	29.
Input Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	29.
Custom Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	29.
Changing the TV Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	30.
Checking for System Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . .	30.
Viewing System Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	30
Changing the On-Screen Menu Language. . . . . . . . . . . . . . . . . . .	30
Setting the Time and Local Settings. . . . . . . . . . . . . . . . . . . . . . . .	31
Adjusting the CEC Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	31.
Adjusting the Power Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	31
Changing the TV Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	32.
To edit your TV name: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	32
Managing Mobile Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	32
Accessibility Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	32
Using the Reset & Admin Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	33
Restoring the TV to Factory Default Settings . . . . . . . . . . . . . . .	33.
Performing a Soft Power Cycle. . . . . . . . . . . . . . . . . . . . . . . . . . . .	33
Turning the Power Indicator On or Off . . . . . . . . . . . . . . . . . . . .	33.
Setting a System PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	34
Using the USB Power Feature . . . . . . . . . . . . . . . . . . . . . . . . . . .	34.
About Viewing Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	34
Using the Info Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	35.

SmartCast HomeSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

What is SmartCast Home? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36. How to Launch SmartCast Home: . . . . . . . . . . . . . . . . . . . . . . . . 36. What you can do with SmartCast Home . . . . . . . . . . . . . . . . . . . 36.

Control your TV with the SmartCast Mobile™ App . . . . . . . . . . . 36.

WatchFree™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	37
What is WatchFree? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	37
What you can do with WatchFree . . . . . . . . . . . . . . . . . . . . . . . .	37.
How to Launch WatchFree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	37.
Playing USB Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	38
Preparing Your USB Drive to Play USB Media. . . . . . . . . . . . . . . .	38
Displaying USB Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	38
Removing the USB Drive from the TV . . . . . . . . . . . . . . . . . . . . .	38.
Product Registration and Technical Support. . . . . . . . . .	42
Help Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	43
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	45
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . .	46
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	47
Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	49

ii

Safety & Certification

THANK YOU FOR CHOOSING VIZIO

And congratulations on your new VIZIO TV!

To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference . Be sure to inspect the package contents to ensure there are no missing or damaged parts .

PRODUCT REGISTRATION

To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at www .VIZIO .com or call toll free at [phone] .

We recommend that you register your VIZIO product at www .VIZIO .com .

WHEN READING THIS MANUAL

TIP: When you see this symbol, please read the accompanying helpful tip .

WARNING: When you see this symbol, please read the accompanying important warning or notice. It is intended to alert you to the presence of important operating instructions .

Color Text — This is the TV menu feature you should be selecting.

Grey Text — This is an action for you to complete, such as entering in a password .

> — The arrow sign shows the flow of the steps you should take.

1 . Lists additional steps you can take for each setting .

•Bullets give more detailed information about each feature .

IMPORTANT SAFETY INSTRUCTIONS

•Read these instructions .

•Keep these instructions .

•Heed all warnings .

•Follow all instructions .

•Do not use this apparatus near water .

•Clean only with dry cloth .

•Do not block any ventilation openings . Install in accordance with the manufacturer’s instructions .

•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

•Do not defeat the safety purpose of the polarized or grounding-type plug . A polarized plug has two blades with one wider than the other . A grounding type plug has two blades and a third grounding prong . The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet .

•Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus .

•Only use attachments/accessories specified by the manufacturer.

•Use only with the cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus . When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over .

•Unplug this apparatus during lightning storms or when unused for long periods of time .

•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped .

•Unplug the power cord before cleaning your TV .

•Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being

damaged, the following instructions should be observed for the installation, use, and maintenance of your TV . Read the following safety instructions before operating your TV . Keep these instructions in a safe place for future reference .

•To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your TV .

•Unplug this apparatus during lightning storms or when unused for long periods of time .

•When moving your TV from an area of low temperature to an area of high temperature, condensation may form in the housing . Wait before turning on your TV to avoid causing fire, electric shock, or component damage.

•A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your

TV close to smoke . Operating your TV close to smoke or moisture may cause fire or electric shock.

•Slots and openings in the back and bottom of the cabinet are provided for ventilation . To ensure reliable operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered . Do not place your TV in a bookcase or cabinet unless proper ventilation is provided .

•Never push any object into the slots and openings on your TV cabinet . Do not place any objects on the top of your TV . Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your TV.

•Your TV should be operated only from the type of power source indicated on the label . If you are not sure of the type of power supplied to your home, consult your dealer or local power company .

•Do not apply pressure or throw objects at your TV . This may compromise the integrity of the TV . The manufacturer’s warranty does not cover user abuse or improper installations .

•The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer.

•When connected to a power outlet, power is always flowing into your TV. To totally disconnect power, unplug the power cord .

•The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons.

iii

•Do not overload power strips and extension cords . Overloading can result in fire or electric shock.

•The wall socket should be installed near your TV and easily accessible .

•Only power of the marked voltage can be used for your TV . Any other voltage than the specified voltage may cause fire or electric shock.

•Do not touch the power cord during lightning . To avoid electric shock, avoid handling the power cord during electrical storms .

•Unplug your TV during a lightning storm or when it will not be used for long period of time . This will protect your TV from damage due to power surges .

•Do not attempt to repair or service your TV yourself . Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards .

If repair is required, contact your dealer and refer all servicing to qualified service personnel .

•WARNING: Keep your TV away from moisture . Do not expose your TV to rain or moisture . If water penetrates into your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

•Do not use your TV if any abnormality occurs . If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately . Do not try to repair your TV yourself .

•Avoid using dropped or damaged appliances . If your TV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair . Continued use of your TV may cause fire or electric shock.

•Do not install your TV in an area with heavy dust or high humidity . Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock .

•Follow instructions for moving your TV . Ensure that the power cord and any other cables are unplugged before moving your TV .

•To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions .

•Insert batteries in accordance with instructions . Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator.

Do not expose batteries to excessive heat such as sunshine, fire or the like.

•When unplugging your TV,grab the head of the power plug, not the cord . Pulling on the power cord may damage the wires inside the cord and cause fire or

electric shock . When your TV will not be used for an extended period of time, unplug the power cord .

•To reduce risk of electric shock, do not touch the connector with wet hands .

•This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

•The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable .

•If any of the following occurs, contact the dealer:

−The power cord fails or frays .

−Liquid sprays or any object drops into your TV .

−Your TV is exposed to rain or other moisture .

−Your TV is dropped or damaged in any way .

−The performance of your TV changes substantially .

•CAUTION: Theseservicinginstructionsareforusebyqualifiedservicepersonnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

•The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons .

•WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). With continued exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort .

•Install the TV where it cannot be pulled, pushed or knocked over .

•Do not allow children to hang onto the product .

•Store the accessories (remote, batteries, etc .) in a location safely out of the reach of children .

•The American Academy of Pediatrics discourages television viewing for children younger than two years of age .

•WARNING: Never place a television set in an unstable location . A television set may fall, causing serious personal injury or death .

•Many injuries, particularly to children, can be avoided by taking simple precautions such as:

•Using cabinets or stands recommended by the manufacturer of the television set.

•Only using furniture that can safely support the television set .

•Ensuring the television set is not overhanging the edge of the supporting furniture .

•Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support .

•Not placing the television set on cloth or other materials that may be located between the television set and the supporting furniture .

•Educating children about the dangers of climbing on furniture to reach the television set or its controls .

•If your existing television set is being retained and relocated, the same considerations as above should be applied .

•WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

iv

TELEVISION ANTENNA CONNECTION PROTECTION

If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges .

Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode .

Lightning Protection

For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system .

Power Lines

Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits . Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation .

Ground Clamp	Antenna Lead In Wire

Antenna Discharge Unit

(NEC Section 810-20)

Grounding Conductors

(NEC Section 810-21)

Ground Clamps

Electric Service Equipment	Power Service Grounding Electrode System
	(NEC ART 250, part H)

v

Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories . Manufactured under license from

Dolby Laboratories. Confidential unpublished works. Copyright ©

1992-2015 Dolby Laboratories . All rights reserved .

The terms HDMI, HDMI High-Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc .

For DTS patents, see http://patents .dts .com .

Manufactured under license from DTS, Inc . DTS, the Symbol, DTS and the Symbol together, and DTS Studio Sound II are registered trademarks and/or trademarks of DTS, Inc . in the United States and/or other countries . © DTS, Inc . All Rights Reserved .

vi

Getting to Know Your TV	1

FRONT PANEL

Remote Sensor and Power Indicator

When using the remote, aim it directly at this sensor .

The power indicator flashes on when the TV turns on, then goes out after several seconds.

To keep the power indicator on, see Turning the Power Indicator On or Off on page 33.

7

REAR PANEL—M556-G4 & M656-G4

HDMI

Connect an HDMI device

Composite

Connect a composite

Audio Out
Connect to an RCA device, such as sound bar
Coaxial
Connect to a coaxial cable from cable, satellite, or antenna
USB
Connect a USB thumb drive to play photo, music, or video
Optical Audio Out
Connect to an optical/SPDIF audio device, such as home audio
receiver
Ethernet
Connect an Ethernet cable to modem/ router
Power
Press to turn on the TV. Press and hold to turn the TV off
Volume
Press to increase or decrease the TV volume level	VOL

Input

INPUT

Press to access the input menu

1

The actual number of ports and their locations may vary, depending on the model .

8

1

REAR PANEL—M706-G3

Power

Press to turn on the TV .

*Press and hold to turn the TV off.

Volume

Press to increase or decrease the TV volume level .

Input

Press to access the input menu .

VOL

INPUT

Note: The image shown here is for illustrative purposes only and may be subject to change .

The actual number of ports and their locations may vary, depending on the model .

HDMI	Component/Composite	Audio Out	Coaxial	USB	Optical Audio Out	Ethernet
Connect an HDMI	Connect a component or	Connect to an RCA device, such	Connect to a coaxial cable	Connect a USB thumb drive to play	Connect to an optical/SPDIF	Connect an Ethernet
device	composite	as sound bar	from cable, satellite, or	photo, music, or video	audio device, such as home audio	cable to modem/ router
			antenna		receiver

9

1

Connecting a device — AUDIO & VIDEO CABLE TYPES

Your TV can be used to display output from most devices .

1 . Verify that your device has a video port that matches an available port on the TV (HDMI, Composite, etc .) . 2 . Connect the appropriate cable (not included) to the TV and the device .

3 . Turn the TV and your device on .

4 . Set the TV’s input to match the connection you used (HDMI-1, HDMI-2, etc .) .

HDMI CABLE	COMPOSITE (AV) CABLE
	(Shared with Component input)
HDMI	Y
	L
COMPONENT CABLE—ONLY ON M706-G3	R
Y
Pb/Cb	COAXIAL CABLE

Coaxial

Pr/Cr

L

R

Connecting a device — AUDIO CABLE TYPES

Your TV can be output sound to an audio device, such as a receiver or sound bar .

1 . Verify that your device has an audio port that matches an available port on the TV (optical, RCA, etc) . 2 . Connect the appropriate cable (not included) to the TV and the device .

3 . Turn the TV and your device on .

HDMI CABLE

HDMI

COMPONENT AND/OR COMPOSITE CABLE

R

L

OPTICAL/SPDIF CABLE

Optical

Note: The actual ports and their locations may vary, depending on the TV model .

10

WALL-MOUNTING THE TV

First you will need a wall mount. Consult the provided table below to find the appropriate mount for your TV .

Be sure the mount you choose is capable of supporting the weight of the TV .

To install your TV on a wall:

1 . Disconnect any cables connected to your TV .

2 . Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV .

3 . If attached, remove the stands by loosening and removing the screws .

4 . Attach your TV and wall mount to the wall by carefully following the instructions that came with your mount . Use only with a UL-listed wall mount bracket rated for the weight/load of your TV .

Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you .

WARNING: Do not use the screws that are included inside the wall mount holes to mount TV .

1

Note: The image shown here is for illustrative purposes only and may be subject to change .

The actual number of ports and their locations may vary, depending on the model .

	M556-G4	M656-G4	M706-G3
Screw Size:	M6	M6	M6
Hole Depth:	17 .9 mm	19 .3 mm	12 mm
Hole Pattern:
	400 mm x 200 mm	400 mm x 200 mm	400 mm x 400 mm
Weight w/o Stand:	31 .00 lb (14 .06 kg)	41 .89 lb (19 .00 kg)	56 .90 lb (25 .81 kg)

11

USING THE REMOTE

Note that specific buttons may vary depending on your model.

INPUT

MENU

EXIT

OK

BACK

INFO

VOL

Power

Turn television on or off

Input

Change the currently displayed input

App Launcher

Quickly launch the pictured app

Menu

Display the settings menu

Exit

Close the on-screen menu

Arrow Buttons

Navigate the on-screen menus

OK/Play/Pause

Select the highlighted menu option and play or pause content

Back

Go to the previous on-screen menu

Info

Display the info window

WatchFree™

Access WatchFree channels

(not available in Canada)

Volume Up/Down

Increase or decrease the loudness of the audio

or

CC

1	2	3
4	5	6
7	8	9
	0

PIC

CH

SmartCast HomeSM Button

Launch SmartCast Home/Return to SmartCast Home Screen

Closed Caption

Open the closed caption menu

Open Accessibility menu by holding down this button for 5 seconds.

Mute

Turn the audio on or off

Last

Return to the channel last viewed

Number Pad

Manually enter a channel

Pic

Cycle through the different picture setting modes

Enabled/disable talk back feature*

Dash

Use with number pad to manually enter a digital sub-channel (for example, 18-4 or 18-5)

Wide

Change the picture display size/aspect ratio

Enable/disable zoom mode*

Channel Up/Down

Change the channel

1

Replacing the Batteries

1 . Find the notch on the back of the remote . Insert a coin and pry open the back cover .

2 . Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment .

3 . Replace the battery cover .

In many places batteries cannot be thrown away or discarded with household waste. Please ensure you properly dispose of your batteries consistent with the laws and/or regulations where you live. For more information please visit: www.vizio.com/environment

WARNING: Keep the remote control batteries away from children .

It may cause choking and/or lead to a fire or chemical burn if mishandled. Do not dispose of batteries in fire. Replace only with batteries of the correct type .

TIP: When needed, VIZIO recommends replacing the batteries that came with this remote with two, new Duracell ‘AAA’ alkaline batteries .

*Enabled/disabled different accessibility features by holding down each of these buttons for 5 seconds.

12

Completing The First-Time Setup

Before you begin the first-time setup:

•Your TV should be installed and the power cord should be connected to an electrical outlet .

•If you have a wireless network, have the network password ready .

•If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the TV .

The first time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use:

Choose a language for your TV.

English
		Español		Français

Back

1 . Choose your language .

How are you using your TV?

How are you using your TV?

	Home Use		Store Demo
	Home Use
			Store Demo

2 . Choose home use .

Where is you VIZIO TV located?

USA
		Mexico		Canada

3 . Choose your country .

Choose a Wi-Fi Network.

Choose a Wi-Fi Network.

Home Network		Public Wi-Fi			John’s Network				Ana’s Network		Encrypted
		Rescan Networks			Hotten Netwok		Help		Skip

4 . Choose your Wi-Fi network and enter the password .

Which room is your VIZIO TV Located?

Family Room
		Living Room		Master		Bedroom		Game Room

Add Custom Location

5 . Name your TV .

2

Let’s set up local channels.

To search for local broadcast channels, make sure the cable from the antenna, wall or cable box is properly connected to your VIZIO TV.

Next Skip

6 . Scan for channels .

Terms & Conditions.

Your use of this device and software functionality are covered by VIZIO and Google ‘s respective Terms of Service and Privacy Policies.

By pressing “Accept All”, you agree to be bound by the (i) VIZIO Terms of Service and Privacy Policy and (ii) the Google Terms of Service and Privacy

Policy. NOTE: Accepting the terms and policiesis a condition of using the Cast functionality of this device.

VIZIO Terms &		VIZIO Privacy		Google Privacy		Google Terms &
Conditions		Policy		Policy		Conditons
		Skip For Now		Accept All

7 . Accept the Terms & Conditions and register your device .

Now you're all set.

Enjoy!

13

Using the On-Screen Menu

Your TV features an easy-to-use on-screen menu .

To open the on-screen menu, press the MENU button on the remote . From this menu, you can:

	• Adjust the picture settings		TV Settings
	• Adjust the audio settings		Picture
			Audio
	•	Adjust the network settings	Network
	•	Set up timers	Timers
	• Adjust the channel settings		Channels
			Closed Captions
	•	Set up closed captioning	Input Settings
	• Name and adjust Inputs		System
			User Manual

•Adjust TV settings

•View the user manual

3

NAVIGATING THE ON-SCREEN MENU

To open the on-screen menu:

1 . Press the MENU button on the remote .

2 . Use the Arrow buttons to highlight a menu option, and press the OK button to select that option .

TIP: While navigating the on-screen menu, you can press the BACK button at any time to return to the previous menu screen . The EXIT button will close the on-screen menu .

CHANGING THE INPUT SOURCE

External devices, such as DVD players, Blu-ray Players, and video game consoles, can be connected to your TV . To use one of these devices with your TV, you must first change the input source using the Input menu.

To change the input sources:

1 . Press the INPUT button on the remote . The input menu is displayed .

2 . Use the Arrow buttons or the INPUT button on the remote to highlight the input you wish to view . The corresponding inputs are named on the back of your TV .

3 . Press OK or release the INPUT button . The selected input is displayed .

Change Input

SMARTCAST		WatchFree	HDMI-1	HDMI-2	HDMI-3	COMP	TV

Input Name

The underlined input on the left is the current input selected . Inputs may vary by TV .

TIP: You can change the input names that appear on the Input menu to make your devices easy to recognize . See Renaming Devices on the Input Menu on page 29.

14

3

CHANGING THE SCREEN ASPECT RATIO

To change the screen aspect ratio:

Menu > System > Aspect Ratio

Use the Arrow buttons to highlight the aspect ratio you wish to view and press OK .

YourTVcandisplayimagesindifferentmodes:Normal,Wide,Zoom,andPanoramic.

•Normal (default) — No change to aspect ratio .

•Wide — Stretches a 4:3 aspect ratio to fill 16:9 screen. If a 16:9 image, adds black bars to top and bottom .

•Zoom — Expands image both horizontally and vertically by 14% .

•Panoramic* — Stretches a 4:3 image to fill 16:9 screen with an algorithm so the center doesn’t look stretched .

Some programs have black bars on the top or sides of the screen so that the picture keeps its original shape . Examples include widescreen movies and older TV programs .

Normal	Panoramic	Wide	Zoom

TIP: The aspect ratio cannot be changed for Ultra HD content or

HDR content .

*Available aspect ratio settings may vary by input source. Panoramic mode is only available for standard definition TV (480i/480p).

15