S4220w-E4
VIZIO
QUICK START GUIDE
Model: S4220w-E4
IMPORTANT SAFETY INSTRUCTIONS
Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric
shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use,
and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions
in a safe place for future reference.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
• To reduce the risk of electric shock or component damage, switch off the power before connecting other
components to your Unit.
• Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a
spray cleaner on your Unit. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving your Unit from an area of low temperature to an area of high temperature, condensation may
form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or component damage.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable
operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do
not place your Unit in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the
top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit.
• The power cord must be replaced when using different voltage than the voltage specified. For more information,
contact your dealer.
• When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug
the power cord.
• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of un-isolated, dangerous voltage within your Unit that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and servicing instructions in the literature accompanying
your Unit.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket should be located near your Unit and be easily accessible
• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit,
unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord
and contact your dealer immediately. Do not try to repair your Unit yourself.
• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power cord immediately and contact your dealer for repair.
Continued use of your Unit may cause fire or electric shock.
• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with
heavy dust or high humidity may cause fire or electric shock.
• Ensure that the power cord and any other cables are unplugged before moving your Unit.
• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires
inside the cord and cause fire or electric shock. When your Unit will not be used for an extended period of time,
unplug the power cord.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert the remote control battery in accordance with instructions. Incorrect polarity may cause the battery to leak
which can damage the remote control or injure the operator.
• See the important note and rating located on the bottom of the unit.
• WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled
with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture.
• CAUTION - Danger of explosion or fire if battery is mistreated. Replace only with the same or specified type.
• Do not leave the battery exposed to direct sunlight for a long period of time with doors and windows closed. Do
not disassemble the battery or dispose of it in fire.
• Disconnect the mains plug to shut off when you experience trouble or the device is not in use. The mains plug
shall remain readily operable.
h
TABLE OF CONTENTS
Table of Contents .....................................................................3
Package Contents ...................................................................4
Controls & Connections ..........................................................5
FIrst-Time Setup ........................................................................7
Bluetooth Pairing ......................................................................12
Using Bluetooth Mode .............................................................13
Advanced Setup .....................................................................14
Wall Mounting the Sound Bar .................................................15
Adjusting Sound Bar Settings ..................................................17
Help & Troubleshooting ...........................................................19
One-Year Limited Warranty ......................................................22
Legal & Compliance ...............................................................23
PACKAGE CONTENTS
High Definition Sound Bar
Power Cable
2 x Sound Bar Wall
Mount Brackets
Stereo RCA to 3.5mm
Audio Cable
2 x Wall
Mount Screws
(Size: M4 x 10)
Remote Control
with Batteries
Coaxial Audio
Cable
Wall Mount
Template
4
Quick
Start Guide
Digital Optical
Cable
CONTROLS & CONNECTIONS
Back of Sound Bar
Power Port
(USB 5)
USB Port
(Digital 3)
Coaxial In
(Optical 4)
Digital Optical
Audio In
5
(Aux 1)
Analog Audio In
(Aux 2)
Analog Audio In
Back of Sound Bar
Control Buttons are located here:
Power
Input
Bluetooth Input
(Hold to force pair, See “Bluetooth Pairing” on page 12)
+
Volume
-
6
FIRST-TIME SETUP
Connect one of the
included cables to ONE TV
1
audio output as shown.*
Connection ports are located here:
GOODGOODBETTER BETTER
DIGITAL OPTICAL
CABLE**
DIGITAL COAXIAL
CABLE**
AND CONNECT IT TO YOUR TV
*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to
your other devices (Blu-ray player, game system, etc) see your device’s user manual.
3.5MM TO
RCA CABLE
CHOOSE ONE CABLE:
BETTER
GOOD
**When using either of the Digital Inputs, if there is no audio: (A) try setting the TV
output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not
7
pass through digital audio.
3.5MM TO
RCA CABLE
2
Connect a power cable to
the sound bar.
3
Plug the power cable into
a power outlet.
8
Loading...