Sound bar appearance may vary.
USER MANUAL
SB4551-D5, SB4051-D5, SB4531-D5, SB4031-D5
Safety Information
IMPORTANT SAFETY INSTRUCTIONS - SMARTCAST™ SOUND BAR
Your sound bar is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your sound bar from being damaged, the following instructions should be observed for the installation, use, and maintenance of your sound bar. Read the following safety instructions before operating your sound bar. eep these instructions in a safe place for future reference.
•To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your sound bar.
•Read these instructions.
•eep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water.
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus including amplifiers that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer.
•nplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
•nplug the power cord before cleaning your sound bar.
•hen moving your sound bar from an area of low temperature to an area of high temperature, condensation may form in the housing. ait before turning on your sound bar to avoid causing fire, electric shock, or component damage.
•A distance of at least three feet should be maintained between your sound bar and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your sound bar close to smoke. Operating your sound bar close to smoke or moisture may cause fire or electric shock.
•Do not place your sound bar in a bookcase or cabinet unless proper ventilation is provided.
•Do not place any objects on the top of your sound bar. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your sound bar.
•Your sound bar should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
•Do not apply pressure or throw objects at your sound bar. This may compromise the integrity of the sound bar. The manufacturer’s warranty does not cover user abuse or improper installations.
•Thepowercordmustbereplacedwhenusingdifferentvoltagethanthevoltagespecified.Formoreinformation,contactyourdealer.
• henconnectedtoapoweroutlet,powerisalways owingintoyoursoundbar.Tototallydisconnectpower,unplugthepowercord.
•Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
•The wall socket should be installed near your sound bar and easily accessible.
•Only power of the marked voltage can be used for your sound bar. Any other voltage than the specified voltage may cause fire or electric shock.
•Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
•nplug your sound bar during a lightning storm or when it will not be used for long period of time. This will protect your sound bar from damage due to power surges.
•Do not attempt to repair or service your sound bar yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel.
•ARNING: eep your sound bar away from moisture. Do not expose your sound bar to rain or moisture. If water penetrates into your sound bar, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
•Do not use your sound bar if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your sound bar yourself.
•Avoid using dropped or damaged appliances. If your sound bar is dropped and the housing is damaged, the internal components may function abnormally. nplug the power cord immediately and contact your dealer for repair. Continued use of your sound bar may cause fire or electric shock.
•Do not install your sound bar in an area with heavy dust or high humidity. Operating your sound bar in environments with heavy dust or high humidity may cause fire or electric shock.
•Follow instructions for moving your sound bar. Ensure that the power cord and any other cables are unplugged before moving your sound bar.
•hen unplugging your sound bar, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. hen your sound bar will not be used for an extended period of time, unplug the power cord.
•To reduce risk of electric shock, do not touch the connector with wet hands.
•Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like.
•If any of the following occurs, contact the dealer:
•The power cord fails or frays.
•Liquid sprays or any object drops into your sound bar.
•Your sound bar is exposed to rain or other moisture.
•Your sound bar is dropped or damaged in any way.
•The performance of your sound bar changes substantially.
•This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
•The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
•CA TION - These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
ofuninsulatedDANGERO SVOLTAGEwithintheproduct’senclosurethatmaybeofsu cientmagnitudetoconstitute H a risk of electrical shock to persons.
ii
Table of Contents
First-Time Setup ...................................................... |
4 |
Pairing a Device with the Sound Bar .............................................. |
5 |
VIZIO SmartCast™ App ............................................. |
8 |
Register for a MyVIZIO account....................................................... |
8 |
Navigating the SmartCast™ App....................................................... |
9 |
ser Profile Settings......................................................................... |
11 |
Picking something to Listen to ........................................................ |
13 |
Managing Categories ....................................................................... |
15 |
Device Settings ........................................................ |
16 |
Setting up additional SmartCast Devices ....................................... |
16 |
Renaming an Input ........................................................................... |
19 |
Renaming Devices on the Input Menu..................................... |
20 |
Adjusting Audio Settings.................................................................. |
21 |
Using the Audio Menu............................................................... |
22 |
Adjusting System Settings ............................................................... |
23 |
Viewing System Information..................................................... |
24 |
Auto Detecting an input ............................................................ |
24 |
Performing a Speaker Test........................................................ |
25 |
Setting a Sleep Timer................................................................. |
25 |
Pairing a Subwoofer* ................................................................ |
26 |
Resting to Defaults..................................................................... |
26 |
Adjusting Network Settings ............................................................. |
27 |
Using the Network Connection menu ..................................... |
28 |
Troubleshooting...................................................... |
31 |
Specifications........................................................... |
32 |
Specifications........................................................... |
33 |
Warranty Information ............................................. |
34 |
Legal & Regulatory .................................................. |
36 |
iii
First-Time Setup |
1 |
|
|
Welcome to VIZIO SmartCast™!
Your new VIZIO SmartCast™ Sound Bar is part of the all-new collection of home theater displays, sound bars and home audio speakers that can all be controlled by one ingenious app: the VIZIO SmartCast app.
With the app, you can browse movies, TV shows, music and more from multiple sources or apps in one view, without having to switch back and forth between those apps or sources. And then just tap to cast and listen on your VIZIO Sound Barfrom anywhere in your home. It works over WiFi, so you can control your VIZIO Sound Bar from any room, and keep using your device to continue browsing, play games, text or even watch another show, without disrupting what’s playing on your sound bar. With VIZIO SmartCast, what you love doesn’t change, but how you experience it will never be the same.
Now let’s get you into setup so you can start casting!
4
1
PAIRING A DEVICE WITH THE SOUND BAR
Need help setting up the sound bar?
Refer to the printed Quick Start Guide (included) for detailed instructions on how to setup your new sound bar. You can also find a digital copy on support.vizio.com.
1.Turn on the SmartCast Sound Bar by pressing the Power button on the top of the sound bar or by pressing the Power button on the sound bar remote. Launch the SmartCast App on your device. Tap Get Started on your device to begin the First-Time Setup.
hen powered on for the first time, the sound bar will automatically look for a connected input. All LEDs will ash bottom to top continuously. To stop this, press INPUT on the bar or continue setup
Sound Bar LEDs |
Tablet Remote |
2.Select your language and tap Next to continue.
3.Hold your device close to the LED on the bottom left corner of the sound bar for a few seconds to pair it.
When successfully paired, a paring tone will be heard from the sound bar.
Sound bar appearance may vary.
1
4.Your device begins to search for a wireless network to connect to. Select your wireless network from the list and enter your password. A blue LED on your sound bar confirms a wireless connection.
5.Use your device to name your sound bar.
6.Take a moment to read the VIZIO Terms of Service and Privacy Policy, as well as Google’s Terms of Service and Privacy Policy. When you are done, tap NEXT to continue.
Sound bar appearance may vary.
6
1
7.Use your device to register your sound bar. If you do not wish to register, tap Skip in the lower left corner.
8.The First-Time setup is complete. The VIZIO SmartCast™ App is displayed.
Sound bar appearance may vary.
7
VIZIO SmartCast™ App 2
The VIZIO SmartCast™ app lets you swipe or use voice search to find your favorite content, across multiple apps, in one simply aggregated screen, making it easy to discover and enjoy what you love.
REGISTER FOR A MYVIZIO ACCOUNT
1.Launch the VIZIO SmartCast™ app.
2.Tap Create an Account to register for a MyVIZIO account. Follow the on-screen instructions to complete the registration process. If you do not want to register for a MyVIZIO account, tap Skip to continue.
To take full advantage of the VIZIO SmartCast™ app, VIZIO recommends you register for a MyVIZIO account.
8
2
NAVIGATING THE SMARTCAST™ APP
After Creating/Logging into your MyVIZIO account, the home page of the SmartCast™ app is displayed.
|
|
|
|
|
|
Search |
|||
Menu |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
Device Power |
|
Device Settings |
||
|
|
|||
|
|
|
|
|
|
|
|
|
Device Input |
|
|
|
|
Volume Controls
Device Menu
The Device Menu is available throughout the SmartCast app, allowing you to easily access the device controls.
Tap to minimize
9
2
Swipe to reveal a list of content categorized into TV Shows, Movies, Music, Live TV, Kids, and Live Streams. You can also access these categorizes by tapping the 
button in the top left corner.
Please Note: Only content in the Music category can be cast to the sound bars.
OR
10
2
USER PROFILE SETTINGS
Everyusercanregistertheirveryownuserprofile MyVIZIO,Facebook,orGoogle . To access the Profile page:
1.Tap the 
button to reveal the side menu.
2. Tap ie |
rofile. |
|
|
|
|
11
2
To modify the account settings:
1.Tap the 
button to access the account settings page. You can change the First Name, Last Name, E-mail Address, and password by tapping on each of them.
To edit profile settings:
1. From the Profile page, tap Edit rofile. You can edit the Profile Color, Profile Name, and Location by taping on each of them.
12
Loading...