Sony CECH-2506B, CECH-2507B, CECH-2512B, CECH-3006A, CECH-3006B Instruction Manual

...

0 (0)

Before using this product, carefully read all product documentation and retain it for future reference.

CECH-2506B CECH-2507B CECH-2512B

Instruction Manual

4-199-233-81(1)

WARNING

CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Caution Use of controls or adjustments or performance of

procedures other than those specified herein may result in hazardous radiation exposure.

The use of optical instruments with this product will increase eye hazard.

This appliance is classified as a CLASS 1 LASER product under IEC60825-1:2007.

Photosensitivity/Epilepsy/Seizures

A very small percentage of individuals may experience epileptic seizures or blackouts when exposed to certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or when playing video games may trigger epileptic seizures or blackouts in these individuals. These conditions may trigger previously undetected epileptic symptoms or seizures in persons who have no history of prior seizures or epilepsy. If you, or anyone in your family, has an epileptic condition or has had seizures of any kind, consult your physician before playing.

IMMEDIATELY DISCONTINUE use and consult your physician before resuming gameplay if you or your child experience any of the following health problems or symptoms:

dizziness,



altered vision,



eye or muscle twitches,



loss of awareness,



disorientation,



seizures, or



any involuntary movement or convulsion.



RESUME GAMEPLAY ONLY ON APPROVAL OF YOUR PHYSICIAN.

Use and handling of video games to reduce the likelihood of a seizure

Use in a well-lit area and keep as far away as possible from the television



screen.

Avoid large screen televisions. Use the smallest television screen available.



Avoid prolonged use of the PS3™ system. Take a 15-minute break during each



hour of play.

Avoid playing when you are tired or need sleep.



Radio waves

Radio waves may affect electronic equipment or medical devices (for example, pacemakers), which may cause malfunctions and possible injuries.

If you use a pacemaker or other medical device, consult your physician or the



manufacturer of your medical device before using the wireless networking feature (Bluetooth

Do not use the wireless networking feature in the following locations:





Areas where wireless network use is prohibited, such as in hospitals. Abide

–

by medical institution regulations when using the system on their premises.

–

Areas near fire alarms, automatic doors and other types of automated

equipment.

and wireless LAN).

3D images

Some people may experience discomfort (such as eye strain, eye fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games on 3D televisions. If you experience such discomfort you should immediately discontinue use of your television until the discomfort subsides.

SCE recommends that all viewers take regular breaks while watching 3D video, or playing stereoscopic 3D games. The length and frequency of necessary breaks may vary from person to person – please take breaks that are long enough to allow any feelings of discomfort to subside. If symptoms persist, consult your physician.

The vision of young children (especially those under six years old) is still under development. Consult with a physician (such as a pediatrician or eye doctor) before allowing a young child to watch 3D video images or play stereoscopic 3D games. When using any 3D enabled device with your PlayStation should read the instruction manual for that device.

3 system you

System software

The System Software included within this product is subject to a limited license from Sony Computer Entertainment Inc. Refer to http://www.scei.co.jp/ps3-eula for further details.

About national export control

This product may fall within the scope of national export control legislation. You must comply fully with the requirements of such legislation and of all other applicable laws of any jurisdiction in relation to this product.

Notice about U.S. Export Administration Regulations

This product contains software that is subject to certain restrictions under the U.S. Export Administration Regulations, and may not be exported or re-exported to U.S. embargoed destinations. In addition this product may not be exported or re-exported to persons and entities prohibited by the U.S. Export Administration Regulations.

WARNING

Table of contents

WARNING .........................................................................................2

Precautions ....................................................................................... 5

Online information about the PS3™ system ................................... 10

XMB™ (XrossMediaBar) menu .......................................................11

Part names ............................................................................... 12

Getting started .......................................................................... 13

Connection methods ......................................................................13

Performing initial setup of the system software ..............................15

Video output on the PS3™ system ................................................16

Connecting digital audio devices ...................................................20

Turning the PS3™ system on and off ....................................... 21

Using the wireless controller ..................................................... 22

Playing content ......................................................................... 24

Blu-ray Disc (BD)/DVD/CD ............................................................. 24

Playing content on USB devices ....................................................25

File formats that can be played or viewed ......................................25

Playing games .......................................................................... 26

Game compatibility ........................................................................26

Playing games ...............................................................................26

Controller settings ..........................................................................26

Saved data for PlayStation®3 format software ...............................27

Saved data for PlayStation® format software .................................27

Adjusting network settings ........................................................28

Adjusting network settings (wired) ................................................. 29

Adjusting network settings (wireless) .............................................29

Adjusting custom settings .............................................................. 31

Connecting to the Internet ........................................................ 32

Using the Internet browser .............................................................32

Viewing the user's guide ................................................................ 32

Creating a PlayStation®Network account .......................................32

PS3™ system updates ............................................................. 33

Using the on-screen keyboard .................................................. 34

Parental control ........................................................................35

Replacing the hard disk ............................................................ 36

Backing up data ............................................................................. 36

Removing the hard disk ................................................................. 37

Replacing the hard disk .................................................................39

Reinstalling the system software ...................................................40

Restoring data that has been backed up ....................................... 41

Transferring data to another PS3™ system /

restoring the system ................................................................. 42

Transferring data to another PS3™ system ...................................42

Restoring the PS3™ system ..........................................................42

Before disposing of or transferring the PS3™ system ...................42

Before requesting service .........................................................43

Specifications .................................................................................. 48

WARRANTY .................................................................................... 52

Precautions

Before using this product, carefully read all the precautions.

Safety

This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fire, electrical shock or personal injury. To help ensure accident-free operation, follow these guidelines:

Observe all warnings, precautions and instructions.





Regularly inspect the AC power cord for damage and for dust build-up around





the power plug or electrical outlet.

Stop use, unplug the AC power cord from the electrical outlet and disconnect





any other cables immediately if the device functions in an abnormal manner, produces unusual sounds or smells or becomes too hot to touch.

Call the PS3™ customer service hotline at the number printed on the package





carton if the device does not operate properly.

Use and handling

Use in a well-lit area and keep a safe distance from the TV screen.



Avoid prolonged use of the PS3™ system. Take a 15-minute break during each



hour of play.

Avoid playing when you are tired or need sleep.



Stop using the system immediately if you begin to feel tired or if you experience



discomfort or pain in your hands or arms while operating the wireless controller If the condition persists, consult a doctor.

If you experience any of the following health problems, discontinue use of the



system immediately. If symptoms persist, consult with your physician.

Dizziness, nausea, fatigue or symptoms similar to motion sickness

–

– Discomfort or pain in a part of the body, such as eyes, ears, hands or arms

Keep the system and accessories, including cable ties and fasteners, out of the



reach of small children.

Do not connect cables other than a USB cable while the AC power cord is



plugged into the electrical outlet.

Do not touch the system or connected cables or accessories during an



electrical storm.

Any TV or component connected to the system must be functioning properly



and free of defects. If a TV or component connected to the system is faulty or defective, it may cause damage to the TV or component, or to the system itself. As with all electrical products, connection to faulty or defective components, or the failure to connect to a properly wired outlet, may cause sparking and pose a fire hazard.

Do not use the system or accessories near water.



Do not allow liquid, small particles or other foreign objects to get into the



system or accessories.

Do not touch the connectors of the system or accessories.



Do not expose the system or accessories to dust, smoke or steam. Also, do not



place the system in an area subject to excessive dust or cigarette smoke. Dust build-up or cigarette smoke residue on the internal components (such as the lens) may cause the system to malfunction.

Do not expose the system or accessories to high temperatures, high humidity



or direct sunlight.

Do not place the system or accessories on surfaces that are unstable, tilted or



subject to vibration.

Do not set the system other than in the vertical or horizontal position. When



setting the system in the vertical position, use the vertical stand (sold separately) for this model of the system. Also, do not change the position of the system while the system is turned on.

Be careful when carrying the system. If you do not have a good grip, the



system may drop causing potential damage or injury.

Do not move or change the position of the system with a disc inserted. The



vibration may result in scratching of the disc or the system.

Do not turn off the system while data is being saved on or loaded from the hard



disk.

Precautions

Do not stand on or put objects on the system, and do not stack the system with



other devices.

Do not place the system and connected accessories on the floor or in a place



where they may cause someone to trip or stumble.

Do not allow bodily contact with the system or air from the system vents for an



extended period of time while in use. Extended contact under these conditions may cause low-temperature burns.

When connecting the system to a plasma or projection* TV, do not leave a still



image on the TV screen for an extended period of time, as this may leave a faint image permanently on the screen. * Except LCD screen types

Parents are encouraged to monitor children in online activities to ensure safe



and responsible Internet usage.

Notes on safety when using the DUALSHOCK®3 Wireless Controller*

Stop using the system immediately if you begin to feel tired or if you experience



discomfort or pain in your hands or arms while operating the DUALSHOCK wireless controller. If the condition persists, consult a doctor.

The vibration function of the DUALSHOCK



injuries. Do not use the vibration function if you have any ailment or injury to the bones, joints or muscles of your hands or arms. If you have an ailment or an injury, do not play such titles using the DUALSHOCK unless you have set the vibration function to [Off].

Avoid prolonged use of the DUALSHOCK



about 30-minute intervals.

Note that some software titles set the vibration function to "On" by default. To



disable the vibration function, press the PS button of the controller, and then select [Controller Settings]

When using the motion sensor function of the wireless controller, be cautious of



the following points. If the controller hits a person or object, this may cause an accident, injury or damage.

[Vibration Function] [Off].

3 wireless controller can aggravate

3 wireless controller

3 wireless controller. Take a break at

Before use, check that there is plenty of space around you.

–

– When using the controller, grip it firmly and make sure it cannot slip out of

your hand.

If using a controller that is connected to the PS3™ system with a USB cable,

–

make sure that the cable will not hit a person or object. Also take care to avoid pulling out the cable from the PS3™ system.

* These notes also apply to other controllers.

Vents

Do not block any vents. To maintain good ventilation, follow the guidelines below:

Place the system at least 10 cm (4 in) away from a wall surface.



Do not place on a carpet or rug with long fibres.



Do not place in a narrow or cramped space.



Do not cover with cloth.



Do not allow dust to build up on the vents.



AC power cord use

To help ensure safe operation, regularly inspect the AC power cord. If



damaged, stop use immediately and contact the PS3™ customer service hotline at the number printed on the package carton for assistance.

Do not use a power cord other than the supplied AC power cord. Do not modify



the cord.

Do not touch the plug of the AC power cord with wet hands.



Protect the AC power cord from being walked on or pinched particularly at



plugs, expansion receptacles and the point where the cord exits from the system.

Do not place heavy items on the cord.



Do not place the AC power cord near heating equipment and do not expose



the cord to heat.

Do not allow dust or foreign matter to build up around the AC IN connector.



Before connecting or plugging in the AC power cord, check that there is no dust or foreign matter in or on the power plug or connecting end of the cord, the electrical outlet or the AC IN connector on the system rear. If the plug or connector becomes dirty, wipe off with a dry cloth before connecting.

Unplug the AC power cord from the electrical outlet before cleaning or moving



the system, or when you do not intend to use the system for an extended period of time. When disconnecting, grasp the power cord by the plug and pull straight out of the electrical outlet. Never pull by the cord and do not pull out at an angle.

Do not connect the AC power cord to a voltage transformer or inverter.



Connecting the AC power cord to a voltage transformer for overseas travel or an inverter for use in an automobile may cause heat to build up in the system and may cause burns or a malfunction.

Never disassemble or modify the system or accessories

Use the PS3™ system and accessories according to the instructions in the product documentation. No authorisation for the analysis or modification of the system or accessories, or the analysis and use of its circuit configurations, is provided. Unauthorized modification of the system or accessories will void your warranty. There are no user serviceable components inside the PS3™ system (the supplied hard disk may be removed but not disassembled or modified). Additionally, there is a risk of exposure to laser radiation as well as to electrical shock.

Network

A broadband Internet connection is required to connect to a network.



User is responsible for Internet service fees. For details, refer to the information



provided in your service contract or contact your Internet service provider.

Do not use a cord for a standard residential telephone line or cables of types



other than those mentioned here. Using the wrong type of cord or cable can cause more electrical current than necessary to flow through the LAN connector, which may lead to heat build-up, fire or malfunction.

Wireless networking feature

The 2.4 GHz range of radio waves used by the wireless networking feature of



this product is a range shared by various devices. This product has been designed to minimize the effect of other devices using the same range. However, in some cases interference from other devices may reduce the connection speed, shorten the signal range or cause the connection to be terminated unexpectedly.

When using the PS3™ system's scan function to select a wireless LAN access



point, access points that are not intended for public use may be displayed. Only connect to an access point that you are authorized to use, or one that is available through a public wireless LAN or hotspot service.

Moisture condensation

If the system or disc is brought directly from a cold location to a warm one, moisture may condense on the lens inside the system or on the disc. Should this occur, the system may not operate properly. In this case, remove the disc and turn off and unplug the system. Do not put the disc back in until the moisture evaporates (this may take several hours). If the system still does not operate properly, contact the PS3™ customer service hotline at the number printed on the package carton for assistance.

Cleaning

For safety reasons, before cleaning the system or connected accessories, disconnect the AC power cord from the electrical outlet.

Exterior surfaces (plastic cover of system and Wireless Controller)

Follow the instructions below to help prevent the product exterior from deteriorating or becoming discolored.

Wipe with a soft, dry cloth.



Precautions

Do not apply insecticides or other volatile substances.



Do not place any rubber or vinyl materials on the product exterior for an



extended period of time.

Do not use solvents or other chemicals. Do not wipe with a chemically-treated



cleaning cloth.

Vents

When dust accumulates in the system vents, remove the dust with a low-powered vacuum cleaner.

Connectors

Do not use when the connectors of the system or the AC power cord are not clean. If used when dirty, the flow of electrical current may be obstructed. Remove the dirt with a dry cloth.

Discs

Note on compatibility

Some media may have region or territorial restrictions and may not work with your system. See media packaging for details.

Handling

Do not touch the disc surface when handling a disc; hold it by the edges.



Do not stick paper or tape onto discs and do not write on discs.



Fingerprints, dust, dirt or scratches on the disc can distort the picture or reduce



sound quality. Always handle carefully and check that discs are clean before use.

When discs will not be used for an extended period of time, store them in their



cases. Stacking uncased discs or storing them at an angle can cause them to warp.

Cleaning method

Clean discs with a soft cloth, lightly wiping from the center



outwards.

Do not use solvents, record cleaners, anti-static spray or other



chemicals as these can damage the discs.

Storage

Do not expose discs to high temperatures, high humidity or direct sunlight.



Precautions

Online information about the PS3™ system

This manual explains hardware features and provides basic information about how to set up and operate the PS3™ system, including warnings and precautions for the safe and proper use of the system. You can also access the following information available on the Internet.

Online user's guide http://manuals.playstation.net/document/

This guide contains detailed information about using the PS3™ system.

PlayStation® official website http://asia.playstation.com

For the latest information of:

System software updates



PlayStation



PlayStation



Check that you have all of the following items. If any items are missing, contact the PS3™ customer service hotline at the number printed on the package carton for assistance.

 PlayStation  DUALSHOCK  Printed materials



3 products such as software titles and hardware accessories

product support including latest questions and answers about your product

3 system

3 Wireless Controller

  AV Cable

AC Power Cord

One of the following two cable types is supplied with the system. The plug configuration varies depending on the country or region.

  USB Cable

Friends

Chatting and exchanging messages

PlayStation®Network

Using PlayStation®Network services

Network

Connecting to the Internet

Game

Playing games

Video

Playing video

Music

Playing music

Photo

Displaying images

Settings

Adjusting PS3™ system settings

Information about system functionality and images published in this document may vary from those for your PS3™ system, depending on the system software version in use.

Users

Selecting users to log in to the PS3™ system

XMB™ (XrossMediaBar) menu

The PS3™ system includes a user interface called XMB™ (XrossMediaBar).

Category

Item

Options menu Control panel

Displayed by selecting an icon and pressing the button

Displayed by pressing the content playback

PS button :

Displays the XMB™ menu Turns the system on/off Quits a game

Directional buttons:

Used to select on-screen categories/items

button during

button:

Displays the options menu/control panel

button:

Confirm the selected item

button:

Cancel an operation

Part names

System front / rear

Disc slot

Power button

Eject button

WLAN access indicator

HDD access indicator

USB connectors

LAN connector

HDMI OUT connector

Vent

AC IN connector

AV MULTI OUT connector

DIGITAL OUT (OPTICAL) connector

Caution

Do not use the system in a closed cabinet or other locations where heat may



build up. Doing so may cause the system to overheat and may lead to fire, injury or malfunction.

If the system's internal temperature becomes elevated, the power indicator



will flash alternately in red and green. In this case, turn off the system (

page 21) and leave it unused for a while. After the system cools down,

move it to a location with good ventilation, and then resume use.

DUALSHOCK®3 Wireless Controller

Port indicators

L2 button L1 button

Directional

buttons

Left stick/

button*

SELECT button

* The L3 and R3 buttons function when the sticks are pressed.

Notices

Do not place the system in an area subject to excessive dust or cigarette



smoke. Dust build-up or cigarette smoke residue on the internal components (such as the lens) may cause the system to malfunction.

Do not move or change the position of the system while the power indicator



is lit solid green or flashing green. The vibration that occurs as a result of moving the system may cause data loss or corruption, or damage to the system.

Hint

When placing the system in the vertical position, use of the vertical stand (sold separately) for this model of the system is required for stability.

USB connector

R2 button R1 button

button

button button button

Right stick/

button*

START button PS button

Getting started

VIDEO L

AUDIO

Y L R

COMPONENT VIDEO IN AUDIO IN

Connection methods



Connect your system to a TV

You can use any of the following methods to connect your system to a TV.

Video output in SD (Standard Definition) resolution

Getting started



HDMI OUT

connector

AV MULTI OUT

connector

If video is not displayed on the screen

If you change the type of cable used to connect the system to a TV, video may not appear on the screen. If video does not appear, turn off the system and then turn it on again by pressing the power button for at least five seconds (until the system beeps twice). The video output setting will be reset and video will be output at standard definition (SD) resolution.

AV MULTI OUT

connector

AV Cable

VIDEO IN connector

Video output in HD (High Definition) resolution - component video

AV MULTI OUT

connector

Component AV Cable (sold separately)

Component VIDEO IN

connector

Video output in HD (High Definition) resolution - HDMI™

HDMI OUT

connector

Hints

For details about video output cable types and supported video modes, see "Video output on the



PS3™ system" (

You can connect audio devices that support digital audio playback, such as an AV receiver for home



entertainment use. For details, see "Connecting digital audio devices" (

HDMI Cable (sold separately)

HDMI IN connector

page 16) and "Video output cable types"( page 17).

page 20).

Getting started



Connect an Ethernet cable (sold separately)

Use an Ethernet cable to connect the system to the Internet.

LAN connector AC IN connector

 

Removing the 3-pin converting adaptor (CECH-2506B only)

Electrical outlet configuration may vary depending on the region of use. If the plug on the supplied AC power cord does not match the electrical outlet, loosen the screw and remove the converting adaptor.

3-pin converting adaptor

Mains power plug

Hint

You can use a wireless network connection to connect to the Internet without using an Ethernet cable. For details, see "Adjusting network settings" (

Caution

Do not connect a standard telephone line or other types of cords or cables that are not compatible with the system directly to the LAN connector on the system, as this may cause heat build-up, fire or malfunction.



Connect the AC power cord

After plugging the AC power cord into the electrical outlet, the power indicator on the PS3™ system will light up in solid red ( page 21).

Caution

Do not plug the AC power cord for the system into an electrical outlet until you have made all other connections.

page 28).

Some regions and countries may use a different electrical outlet plug from the one illustrated.

Performing initial setup of the system software

After turning on the system, perform initial setup.

1 Turn on the TV, and then switch the video input of the TV to

match the input connector used by the PS3™ system.

2 Press the power button.

The power indicator turns green and the picture is displayed on the TV screen.

5 Perform initial setup.

Getting started

Power indicator Power button

3 Connect the wireless controller to the system using a USB

cable.

4 Press the PS button on the controller.

The system will recognize the controller. After it has recognized the controller, the initial setup screen will be displayed.

Follow the on-screen instructions to enter settings for system language, time zone, date and time, and user name.

The screen for setting up the Internet connection will be displayed. When connecting using an Ethernet cable, basic settings will be selected automatically if you follow the on-screen instructions. When connecting over a wireless LAN, follow the instructions in "Adjusting network settings (wireless)" (

After the settings have been completed, the XMB™ menu ( be displayed on the TV screen.

Hints

When using an HDMI cable to connect the system to the TV, a screen for



changing the video output resolution will be displayed during initial setup. If you select [Yes] on the screen and then press the resolution will be selected automatically.

For details on entering text, see "Using the on-screen keyboard" (



Settings entered during initial setup can be changed under (Settings) or



(Users). For details, refer to the online user's guide

(http://manuals.playstation.net/document/).

page 29) to set up the connection.

page 11) will

button, the optimal output

page 34).

Getting started

Video output on the PS3™ system

The PS3™ system can output two types of resolution: HD and SD. Refer to the instruction manual for the TV in use to check which video mode is supported.

Video mode *

Aspect ratio

This number indicates the number of scan lines. Note that "i" stands for "interlace" and "p" stands for "progressive". Using progressive results in high-quality video with

minimal flickering.

SD resolution varies depending on the model of the PS3™ system in use and the content that is being played.

The video output setting on the system will display as [Standard (NTSC)].

The video output setting on the system will display as [Standard (PAL)].

1*2

1080p 1080i 720p

16:9 16:9 16:9

Screens showing the difference in resolution

HD screen SD screen

(High Definition)

480p 576p

16:9 4:3

(Standard Definition)

480i * 576i *

16:9 4:3

Video output cable types

Y L RPR/CRPB/CB

COMPONENT VIDEO IN AUDIO IN

S VIDEO L-AUDIO-R

VIDEO L-AUDIO-R

The resolution displayed on the TV varies depending on the input connectors on the TV and the type of cable in use. Select a cable to match the TV in use.

Cable type Input connector on the TV Supported video modes*¹

Getting started

HDMI Cable*²

separately)

(sold

Component AV Cable (sold separately)

S VIDEO Cable (sold separately)

AV Cable (supplied)

HDMI IN connector

Component VIDEO IN connector

S VIDEO IN connector

VIDEO IN connector (composite)

1080p, 1080i, 720p, 480p / 576p

1080p, 1080i, 720p, 480p /

480i *3 / 576i *

*1 Depending on the type of TV or content to be played, some video modes may not be supported.

If a device that is not compatible with the HDCP (High-bandwidth Digital Content Protection) standard is connected to the system using an HDMI cable, video and/or audio cannot be output from the system. Copyright-protected Blu-ray video discs can only be output at 1080p using an HDMI cable connected to a device that is compatible with the HDCP (Highband-width Digital Content Protection) standard.

Connect the system to the TV using an HDMI cable (sold separately). An HDMI cable can output both video and audio and enables you to enjoy digital-quality

video and audio.

The video output setting on the system will display as [Standard (NTSC)].

The video output setting on the system will display as [Standard (PAL)] .

576p, 480i *

/ 576i *

Getting started

Adjusting video output settings

Depending on the type of cables and the connectors used, you may need to adjust the PS3™ system's video output settings to display video at HD resolutions ( page 16) on a TV.

If video is not displayed

Switch the video input of the TV to match the input connector used to



connect to the system.

Turn off the system, and then turn it on again by pressing the power button



for at least five seconds (until the system beeps twice). The video output setting will be reset and video will be output at standard definition (SD) resolution.

1 Select (Settings) (Display Settings) [Video Output

Settings], and then press the button.

2 Select the input connector ( page 17) in use on the TV, and

then press the button.

3 Confirm the screen, and then press the button.

If you changed the connector in step 2, a screen for confirming the change will be displayed.

4 Confirm the settings, select [Yes], and then press the button.

If you changed the connector in step 2, a screen for confirming the settings will be displayed.

5 Select the resolutions supported by the TV, and then press the

button.

The resolution displayed on the TV varies depending on the input connector and the type of cable used ( selected will be used for video output.

Depending on the connector selected in step 2, this screen may not be displayed.

page 17). The highest resolution you

If you select [HDMI], you will have the option to choose [Automatic] or [Custom] on the next screen. In most cases, select [Automatic], and video output settings will be completed automatically.

If you select [AV MULTI / SCART], you must choose the type of output signal on the next screen. In most cases, select [Y Pb/Cb Pr/Cr].

6 Confirm the settings, select [Yes], and then press the

button.

Depending on the connector selected in step 2 and the resolutions selected in step 5, this screen may not be displayed.

7 Select the type of TV, and then press the button.

If you selected an SD resolution ( page 16) in step 5, a screen for selecting the TV screen size will be displayed. Adjust the setting to match the TV in use.

If you selected [720p] or a higher resolution in step 5, the TV type will automatically be set to 16:9 and the screen for selecting the TV screen size will not be displayed.

8 Confirm the settings, and then press the button.

The video output settings will be saved on the system.

9 Adjust audio output settings.

Continue on to adjust audio output settings. Adjust settings to match the TV or audio device in use.

If you select [HDMI], you will have the option to choose [Automatic] or [Manual] on the next screen. In most cases, select [Automatic].

If using a cable other than an HDMI cable to output audio from the TV, select [Audio Input Connector / SCART / AV MULTI]. If using an optical digital cable to output audio, select [Digital Out (Optical)] and choose the output format on the next screen.

10 Confirm the settings, and then press the button.

The audio output settings will be saved on the system.

Hints

You can adjust audio output settings under



Settings)

If the TV in use supports 3D stereoscopic display, a screen for setting the TV’s



screen resolution will be displayed after step 2. Follow the on-screen instructions to adjust the settings. Connect the PS3™ system to a TV that supports 3D stereoscopic display using an HDMI cable.

[Audio Output Settings].

(Settings) (Sound

Getting started

Connecting digital audio devices

You can connect audio devices that support digital audio playback, such as an AV receiver for home entertainment use.

Audio output on the PS3™ system

The supported channels may vary depending on the output connector to be used.

PS3™ system output connectors

AV MULTI OUT connector

DIGITAL OUT (OPTICAL) connector

HDMI OUT connector

Hints

When connecting a digital audio device to the system, go to



(Sound Settings) [Audio Output Settings], and then adjust the settings as

necessary for the audio device.

For simultaneous audio output from multiple connectors, go to



(Sound Settings) [Audio Multi-Output], and set the option to [On].

The system can output both audio and video through an HDMI cable. If both



the TV and the audio device have HDMI connectors, you can output the TV picture to the TV through a connected audio device.

If a device is connected to the PS3™ system via an HDMI cable, do not turn off



the device while the system is turned on (power indicator is lit solid green), as doing so may cause sound distortion or produce abnormal sounds.

Channels that can be used for output

2 Ch. 5.1 Ch. 7.1 Ch.

        

(Settings)

Examples when connecting an audio device

An HDMI cable or optical digital cable can be used to connect an audio device to the PS3™ system.

HDMI cable Optical digital cable

HDMI cable (sold separately)

Digital audio device

HDMI cable (sold separately)

Optical digital cable for audio (sold separately)

Video output cable for the TV in use (

page 17)

TV TV

Turning the PS3™ system on and off

Turning on the system

1 Press the power button.

The power indicator lights up in solid green to indicate that the system is turned on.

Power indicator: solid green

Power button

2 Press the PS button on the controller.

After the controller number is assigned, you can use the controller to operate the system.

PS button

Power indicator status

You can check the power indicator on the PS3™ system to see the current status of the system.

Solid green

Flashing green

Solid red

System on

System turning off

System off (in standby mode)

Turning off the system

1 Press the power button.

The power indicator lights up in solid red.

Power indicator: solid red

Power button

Notice

When the power indicator is lit solid green or flashing green, be sure to abide by the notices below. If you do not, data loss or corruption, or damage to the system may occur.

Do not unplug the AC power cord from the electrical outlet.



Do not move or change the position of the system.



Hints

Before using a wireless controller, you must first pair it with the system



page 22).

(

You can also turn the PS3™ system on and off using the PS button on the



wireless controller. If you use the PS button to turn on the system, the controller number will be assigned at the same time. To turn off the system, press the PS button for more than one second, and then follow the on-screen instructions.

You can also turn off the PS3™ system from the XMB™ menu. Select



(Users) (Turn Off System).

If you will not be using the system for a long period of time, check that the



power indicator is lit solid red, and then unplug the AC power cord from the electrical outlet.

Turning the PS3™ system on and off

Using the wireless controller

1 2 3 4

112 3 4

Preparing for use

To use a wireless controller, you must first register or "pair" the controller with the PS3™ system and assign a number to the controller.

Step 1: Pair the system and the controller.

When using for the first time



When using with a different PS3™ system





Step 2: Assign a controller number.

Every time the system is turned on

Step 1: Pair the system and the controller

When using the controller for the first time or when using with a different PS3™ system, you must first pair the devices. If you turn on the system and connect the controller using a USB cable, the pairing will be completed automatically.

USB cable (supplied)

Check that the system is turned on (power indicator is lit solid green).

Step 2: Assign a controller number

Each time you turn on the system, a number must be assigned to the controller.

Press the PS button.

All of the port indicators flash.



When the controller has been assigned a number, the port indicators for the assigned number turn solid red.

You can connect up to 7 controllers at one time. The controller number is shown by the number above the port indicators. For numbers 5-7, add the numbers of the lit indicators.

Example: Controller number 5 has been assigned.

Hints

Pairing and assigning controller numbers can only be done when the system is



turned on (power indicator is lit solid green).

When a paired controller is used with another PS3™ system, the pairing with



the original system is cleared. Pair the controller with the system again if the controller has been used with another system.

If the controller or the system is turned off, the port indicators on the controller



will turn off and the assigned number will be cleared.

Using the controller wirelessly

If you disconnect the USB cable, you can use the controller wirelessly. To use it wirelessly, the controller's battery must be charged.

Hints

The USB cable can be connected or disconnected while the controller and the



system are turned on.

If the controller does not function, press the PS button, and then reassign the



controller number.

Battery charge level

If you press and hold down the PS button for more than one second, you can check the battery charge level on the screen.

Using the wireless controller

Charging the controller

With the system turned on (power indicator is lit solid green), connect the controller to the system using a USB cable. The port indicators of the controller flash slowly and charging begins. When charging has completed, the port indicators stop flashing.

Hints

The controller can be used while charging.



Charge in an environment where the temperature range is between



10°C - 30°C (50°F - 86°F). Charging may not be as effective when performed in other environments.

The controller cannot be charged when the system is off (in standby mode).



The battery has a limited life span. Battery charge duration will gradually



decrease with repeated usage and age.

Battery life also varies depending on the storage method, usage state,



environment and other factors.

Charge Level

The battery has plenty of charge.

The battery has started losing its charge.

The battery charge level is low.

The battery has no charge. The port indicators on the controller flash rapidly. Charge the controller.

Hint

Depending on the environment or the conditions of use, the remaining charge level may not display correctly and the battery duration may vary.

Playing content

Blu-ray Disc (BD)/DVD/CD

1 Insert the disc.

Notices



The eject indicator turns solid blue when the disc is

Insert the disc with the label side facing up.

Do not insert multiple discs or foreign objects into the disc slot, because this may cause the system to malfunction.

Discs that are not compatible with the system cannot be played.

To play commercially available BD video software, in some cases the encryption key* may need to be renewed. The encryption key can be renewed when the system software is updated ( * AACS (Advanced Access Control System) key

inserted.

page 33).

2 An icon is displayed in the XMB

disc begins.

If the disc does not automatically start, select the icon for the disc from the XMB™ menu, and then press the

Ejecting a disc

Stop playback, and then press the eject button.

menu, and playback of the

™

button.

Eject button

Playing content on USB devices

You can connect external devices, such as devices that are compatible with USB Mass Storage Class, using a USB cable. Devices can be connected while the system is turned on. Refer also to the instructions supplied with the device.

1 Connect the USB device.

An icon is displayed on the screen.

External device such as a digital camera

2 Select the icon, and then press the button.

A list of playable content is displayed.

Notices

Do not remove USB devices or turn off the system while data is being



saved, loaded or deleted. Doing so may cause data loss or corruption.

When using a USB flash drive with a write-protect switch, do not operate



the switch when the device is connected to the system. Doing so may cause data loss or corruption.

File formats that can be played or viewed

File formats that can be played or viewed on this system include ATRAC™, MP3, AAC, JPEG and MPEG-4. For the latest information, refer to the online user's guide (http://manuals.playstation.net/document/).

Hints

Only files that are playable or viewable on the PS3™ system are displayed in



the column for the compatible category (Example: Image data is displayed under

Depending on the storage media, only a subset of the folders on the media



may be displayed. If you select [Display All] from the options menu (

Notice

You should where possible make periodic back-ups of data stored on the hard disk drive as a precaution against possible loss or corruption. If for any reason software or data loss or corruption occurs, it is not possible to restore or repair the software or data. Note that Sony Computer Entertainment Inc. and its subsidiaries and affiliates will not be liable for any loss or corruption of data, files or software. For information on backing up files saved on the hard disk, see “Backing up data” (

(Photo)).

page 11), all folders saved on the media will be displayed.

page 36).

Playing content

Playing games

Game compatibility

PlayStation®3 format software

PlayStation

Operation of all PlayStation

http://asia.playstation.com/status for the latest information on software that can be played on this system.

format software

2 format software

format software titles is not guaranteed. Visit

Can be played on this system*

Cannot be played on this system

Playing games

PlayStation®2 format software titles do not perform on this system.

Starting a game

When you insert the disc, the game starts

The eject indicator turns solid blue when the disc is

Insert the disc with the label side facing up.

inserted.

automatically.

Notice

Do not insert multiple discs or foreign objects into the disc slot, because this may cause the system to malfunction.

Quitting a game

During gameplay, press the PS button on the Wireless Controller. Then select (Game) (Quit Game) to quit the game.

Hint

Depending on the type of software, such as PlayStation

(Quit Game) may not be displayed when the PS button is pressed. In this

case, select [Quit Game] from the screen that is displayed.

format software,

Controller settings

You can change controller settings by selecting (Settings) (Accessory Settings).

Reassign Controllers

Controller Vibration Function

You cannot assign controller port 2-D using this system.

Hint

You can change settings for the controller during gameplay by pressing the PS button. Select or select [Controller Settings] from the screen that is displayed.

If a controller port or number is specified by the software, you can use this setting to assign the appropriate controller port or number.*

You can set the vibration function to on or off. It is set to [On] by default.

(Settings) (Accessory Settings) in the XMB™ screen,

Saved data for PlayStation®3 format software

Saved data for PlayStation®3 format software is saved on the system's hard disk. The data is displayed under (Game) (Saved Data Utility).

Assigning slots

1 Select (Game) (Memory Card Utility (PS/PS2)), and

then press the button.

Playing games

Saved data for PlayStation® format software

To save data from PlayStation® format software, you must create the internal memory cards on the hard disk and assign the cards to slots.

Notice

This system does not support playback of PlayStation®2 format software. Even if you create an internal memory card for PlayStation will not be able to use it to play games.

2 format software, you

Creating internal memory cards

1 Select (Game) (Memory Card Utility (PS/PS2)), and

then press the button.

2 Select (Create New Internal Memory Card), and then press

the button.

Select [Internal Memory Card (PS)], and then press the button.

Follow the on-screen instructions to complete the operation.

2 Select the internal memory card that you want to use, and then

press the button.

Select [Assign Slots], and then assign [Slot 1] or [Slot 2].

Hints

Depending on the software, slots may be preassigned. For details, refer to the



instructions supplied with the software.

You can assign slots during gameplay. Press the PS button on the wireless



controller, and then select [Assign Slots] from the screen that is displayed.

Adjusting network settings

Example of a network configuration (wired)

A wired network configuration requires items ,  and .



Network gateway device

such as an ADSL modem*

To the Internet line



Ethernet cable

*1 The connection method may vary depending on the environment in use. For example, you may be able to connect Ethernet cables directly into the wall outlet in

housing complex units that have preinstalled LAN ports. If you are using such a network environment, you do not need a network gateway device.

A router is a device that enables multiple devices to be connected to one Internet line. A router is necessary if a PC and a PS3™ system will be connected to the

Internet at the same time using one Internet connection.

A wireless router is a device that adds access point functionality to a router.



Router*

Example of a network configuration (wireless)

A wireless network configuration requires items  and .



Network gateway device

such as an ADSL modem*

To the Internet line



Wireless router

(access point) *

2*3

Adjusting network settings (wired)

1 Connect an Ethernet cable (sold separately) to the system.

Adjusting network settings (wireless)

1 Check that an Ethernet cable is not connected to the system.

Adjusting network settings

2 Select (Settings) (Network Settings) [Internet

Connection Settings], and then press the button.

A confirmation message about the Ethernet cable is displayed.

3 Select [OK], and then press the button.

4 Select [Easy], and then press the button.

Basic settings are adjusted automatically, and a list of the settings is displayed. If the list is not displayed, you must adjust custom settings. Refer to the instructions supplied by your Internet service provider to adjust the custom settings (

page 31).

5 Perform the Internet connection test.

If the connection is successful, you will be able to connect to the Internet.

2 Select (Settings) (Network Settings) [Internet

Connection Settings], and then press the button.

A confirmation message about the Ethernet cable is displayed.

3 Select [OK], and then press the button.

4 Select [Easy], and then press the button.

Basic settings are adjusted automatically.

5 Select [Wireless], and then press the button.

Adjusting network settings

6 Adjust wireless LAN settings.

Select the access point that you want to use. You can usually select [Scan] and choose an access point within range of your system.

Scan

Enter Manually

Automatic

System scans for a nearby access point. Select the access point that you want to use.

Specify the access point by entering its SSID manually.

Use the automatic setting feature of the access point. You can follow the on-screen instructions to complete the required settings automatically.

AOSS™

Buffalo, Inc.

7 Adjust the security settings for the wireless network.

Enter the encryption key for the access point. If you selected [Automatic] in step 6, this screen will not be displayed.

None

WEP

WPA-PSK/ WPA2-PSK

Encryption key is not set.

Enter the encryption key. The encryption key field will display an asterisk (*) for each character you enter.

8 Check the settings.

A list of the settings is displayed. If the list is not displayed, you must adjust custom settings. Refer to the instructions supplied by your Internet service provider to adjust the custom settings (

page 31).

9 Perform the Internet connection test.

If the connection is successful, you will be able to connect to the Internet.

Hints

SSID and WEP/WPA keys are types of security information that are required



when connecting to an access point. If you do not have this information, contact the person who set up or maintains the access point.

Depending on the access point you use, you may need the MAC address for



the PS3™ system when connecting to the Internet. You can find the MAC address for the PS3™ system by going to Settings)

When connecting to the Internet wirelessly, signal interference may occur



depending on the usage condition of the wireless network devices. If the Internet data transfer speed is decreased or the wireless controller does not function properly, try using a wired Internet connection.

[System Information].

(Settings) (System

+ 82 hidden pages