SilverCrest SED 3.7 D2 User manual [fr]

ÉPILATEUR BATTERIE/SECTEUR SED 3.7 D2
ÉPILATEUR BATTERIE/SECTEUR
Mode d’emploi
Operating instructions
IAN 273035
EPILIERER, AKKU/NETZ
Bedienungsanleitung
Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec toutes les fonctions de l‘appareil.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
FR / BE Mode d’emploi Page 1 DE / AT / CH Bedienungsanleitung Seite 17 GB Operating instructions Page 33
A
1
2
B
3
3
4 5
6
7
90
8
Sommaire
Introduction .................................. 2
Propriété intellectuelle ...................................2
Utilisation conforme ...........................2
Étendue des fournitures ........................ 3
Élimination de l’emballage ...............................3
Éléments de commande ........................ 4
Caractéristiques techniques ..................... 4
Consignes de sécurité .......................... 5
Marche sur le secteur .......................... 8
Fonctionnement sur accu ....................... 8
Conseils et astuces ............................. 9
Épilation ....................................10
Nettoyage et entretien ........................12
Stockage ................................... 13
Dépannage .................................13
Élimination de l’appareil ...................... 14
Garantie et service ...........................15
Importateur ................................. 16
FR BE
SED 3.7 D2
1
Introduction
FR BE
Toutes nos félicitations pour l’achat de votre nouvel appareil. Ainsi, vous venez d’opter pour un produit de grande qualité. Le mode
d’emploi fait partie de ce produit. Il contient des remarques impor­tantes concernant la sécurité, l’usage et la mise au rebut. Avant l’usage, veuillez vous familiariser avec toutes les consignes d’utilisation et de sécurité. N’utilisez le produit que conformément aux consignes et pour les domaines d’utilisation prévus. Si vous cédez le produit à un tiers, remettez-lui également ces instructions d’utilisation.
Propriété intellectuelle
Cette documentation est protégée par des droits d’auteur. Toute reproduction ou réimpression, même partielle, y compris
la reproduction des illustrations, même modifiées, n’est autorisée qu’avec l’accord écrit du fabricant.
Utilisation conforme
Cet appareil est exclusivement destiné à l’épilation de poils humains dans le cadre de ménages privés. Évitez de l’utiliser à des fins professionnelles ! Toute utilisation autre ou dépassant ce cadre est considérée comme non conforme.
Aucune réclamation ne sera prise en compte suite à des dommages résultant d’une utilisation non conforme du matériel, ou de réparations effectuées incorrectement, ou de modification arbitraire, ou encore de l’utilisation de pièces de rechange non validées.
Seul l’utilisateur assume le risque.
2
SED 3.7 D2
Étendue des fournitures
L’appareil est équipé de manière standard des composants suivants :
Épilateur
Adaptateur secteur
Pinceau de nettoyage
Sac de rangement
Mode d’emploi
Retirez toutes les pièces de l’appareil du carton et retirez l’ensemble du matériau d’emballage. Vérifiez si la livraison est bien complète et ne présente aucun dommage apparent.
REMARQUES
À la livraison, le sac de rangement se trouve sous la coque
en matière plastique dans laquelle a été conditionné l'appa­reil. Vous devrez retirer le carton sous la coque en matière plastique pour pouvoir retirer le sac de rangement
En cas de livraison incomplète ou de dommages résultant
d'un emballage défectueux ou du transport, veuillez vous adresser à la hotline du service après-vente (voir le chapitre Garantie et service).
Élimination de l’emballage
L’emballage protège l’appareil de tous dommages éventuels au cours du transport. Les matériaux d’emballage ont été sélectionnés selon des critères de respect de l’environnement et de recyclage permettant une élimination écologique de ceux-ci.
Le retour de l’emballage en filière de revalorisation permet d’économiser des matières premières et de réduire le volume de déchets. Veuillez éliminer les matériaux d’emballage qui ne servent plus selon la réglementation locale.
SED 3.7 D2
FR BE
3
Éléments de commande
FR BE
Figure A :
Capuchon de protection Tête d’épilation Verrouillages de la tête d’épilation Sécurité de voyage Sélecteur de vitesse Voyant de contrôle rouge/vert Douille pour adaptateur secteur
Figure B :
Adaptateur secteur Sac de rangement Pinceau de nettoyage
Caractéristiques techniques
Adaptateur secteur
Type ZDJ045100EU
Tension d'entrée 100 - 240 V ~, 50/60 Hz
Courant absorbé 0,2 A max.
Tension de sortie 4,5 V
Courant de sortie 1000 mA
Classe de protection
Polarité
4
II /
SED 3.7 D2
Appareil
Tension d'entrée 4,5 V
Courant absorbé 1000 mA
Batterie
3,7 V batterie lithium-ion
700 mAh
Consignes de sécurité
RISQUE D'ÉLECTROCUTION
L'appareil ne doit être branché que dans une
prise réglementairement installée et alimentée par une tension secteur de 100 - 240 V ~ / 50/60 Hz.
Le câble de raccordement de l'appareil n'est
pas remplaçable. Si ce câble est endommagé, il faut mettre l'appareil au rebut.
En cas de défaillances et avant de nettoyer l'appa-
reil, retirez l'adaptateur secteur de la prise secteur.
Pour débrancher le câble de la prise de
courant, saisissez toujours l'adaptateur secteur, n'exercez pas de traction sur le câble lui-même.
Ne pliez et ne coincez pas le câble secteur et
acheminez le câble secteur de telle manière que personne ne puisse marcher ou trébucher dessus.
FR BE
SED 3.7 D2
5
FR BE
RISQUE D'ÉLECTROCUTION
Veillez à ce que le câble secteur ne se mouille ou
ne s’humidifie pas en service. Acheminez-le de telle manière qu’il ne soit ni coincé ni endommagé.
Si l’appareil venait à être endommagé, arrêtez
aussitôt de vous en servir pour éviter tous dangers.
N’utilisez pas l’appareil à l’extérieur.N'enroulez pas le câble secteur autour de l'ap-
pareil et protégez-le contre le risque d'endom­magement.
Ne saisissez jamais l'appareil, le câble secteur
et la fiche secteur avec les mains mouillées.
ATTENTION ! Maintenez l'appareil au sec.
N'utilisez jamais l'appareil à proximité de l'eau, en particulier à proximité d'un lavabo, d'une baignoire ou de récipients similaires. La proximité d'eau représente un danger, même si l'appareil est éteint. Pour cette raison, retirez l'adaptateur secteur après chaque usage. A titre de protection supplé­mentaire, nous recommandons l'installation d'un relais disjoncteur contre les courants de fuite avec un seuil de déclenchement impé­rativement inférieur à 30 mA dans le circuit électrique de la salle de bains. Demandez conseiller à votre électricien.
6
SED 3.7 D2
AVERTISSEMENT ! RISQUE DE BLESSURE !
Si l'appareil a chuté ou s'est endommagé,
il ne faut plus le remettre en service. Faites inspecter et réparer, le cas échéant, l'appareil par des techniciens spécialisés et qualifiés.
N'ouvrez pas le boîtier de l'appareil car il n'est pas
réparable par l'utilisateur. Dans ce cas, la sécurité n'est plus assurée et vous perdez le bénéfice de la garantie. Confiez les réparations de l'appareil défectueux uniquement à un technicien spécialisé.
N’opérez l’appareil qu’avec l’adaptateur sec-
teur fourni.
Ne chargez l’appareil qu’avec l’adaptateur
secteur fourni.
Cet appareil peut être utilisé par des enfants dès
l’âge de 8 ans et par des personnes disposant de capacités physiques, sensorielles ou mentales réduites ou de peu d’expérience et de connais­sances, à condition qu’ils soient surveillés ou qu’ils aient été initiés à l’utilisation sécurisée de l’appa­reil et qu’ils aient compris les dangers en résultant.
Ne pas laisser les enfants jouer avec l’appareil.Il est interdit aux enfants de procéder aux opé-
rations de nettoyage ou d’entretien de l’appareil sans surveillance.
FR BE
SED 3.7 D2
7
FR
ATTENTION - DÉGÂTS MATÉRIELS !
BE
N'utilisez l'appareil qu'à l'intérieur de locaux !
Marche sur le secteur
1) Branchez à cet effet la fiche de l’adaptateur secteur dans la douille de raccordement de l’appareil. Assurez-vous que le sélecteur de vitesse  se trouve sur «0»
2) Branchez l’adaptateur secteur dans une prise secteur. Le voyant de contrôle est rouge et indique ainsi que le processus de chargement est en cours
L’appareil est maintenant prêt à fonctionner.
.
.
Fonctionnement sur accu
1) Enfichez à cet effet la fiche de l’adaptateur secteur dans la douille de raccordement de l’appareil. Assurez-vous que le sélecteur de vitesse  se trouve sur «0».
2) Branchez l’adaptateur secteur dans une prise secteur. Le voyant de contrôle est rouge et indique ainsi que le processus de chargement est en cours.
Dès que le voyant de contrôle est vert, l’appareil est entièrement chargé et vous pouvez couper l’appareil du réseau électrique.
REMARQUE
Lors du premier chargement, il faut environ 80 minutes à
l'appareil pour le charger dans son intégralité.
Rechargez l'appareil lorsque le voyant de contrôle affiche,
par un clignotement rouge-vert alterné, que la charge de la batterie est trop faible.
8
SED 3.7 D2
Conseils et astuces
REMARQUE
N'utilisez pas l'appareil, lorsque vous...
présentez un coup de soleil sur les zones corporelles
concernées.
présentez des irritations ou rougeurs cutanées.souffrez d'une maladie de la peau, comme par
exemple la neurodermite.
avez des boutons d'acnée, des taches de naissance
ou des verrues sur les zones corporelles concernées.
avez des blessures, ouvertes comprises, ou des cicatrices
saillantes sur les zones corporelles concernées.
Appliquez d'abord l'appareil sur une petite zone cachée
pour tester si votre peau le tolère.
La longueur des poils devrait être comprise entre 0,3 cm et 0,5 cm.
S’ils sont plus courts, les pincettes ne les attraperont pas et l’arra­chage de poils plus longs est très douloureux. En présence de poils plus longs, raccourcissez-les au préalable.
La peau doit être exempte de résidus de matières grasses ou
de crème. Sinon les pincettes se collent/s’encrassent et la perfor­mance de l’appareil diminue.
La peau doit être entièrement sèche.
Il est recommandé de s’épiler le soir après la douche. La peau
s’est alors un peu amollie, il est plus facile d’arracher les poils. En outre, la peau «récupère» pendant la nuit et les éventuelles rougeurs cutanées se résorbent.
FR BE
SED 3.7 D2
9
Avant d’effectuer une épilation, il est recommandé de procéder
FR BE
à un peeling ou de frictionner la peau à l’aide d’un gant de mas­sage. Cela permet de supprimer les peaux mortes, d’éviter les poils incarnés et de dresser les poils fins. Il en résulte également une meilleure saisie des poils.
Après l’épilation, appliquez une lotion hydratante ou une crème
sur la peau, une contenant de préférence de l’aloé vera ou des extraits de camomille pour apaiser et hydrater la peau.
Épilation
Lorsque l’appareil est chargé et que les zones corporelles à épiler sont préparées :
1) Caressez encore une fois les poils à supprimer à rebrousse-poils. Vous dressez ainsi les poils pour que les pincettes puissent plus facilement les saisir.
2) Retirez le capuchon protégeant la tête d’épilation .
3) Appuyez sur la sécurité de voyage et faites glisser le sélecteur de vitesse vers le haut pour obtenir le niveau de vitesse souhaitée :
Niveau 1 : pour les zones sensibles
(zone des aisselles et du bikini)
Niveau 2 : pour les jambes
4) Tenez la peau bien tendue à l’aide d’une main.
5) Placez l’épilateur verticalement sur la peau et déplacez-le dessus à rebrousse-poils sans exercer de pression. Ce faisant, veillez à ce que le sélecteur de vitesse  regarde dans votre direction. Ne décrivez aucun mouvement de va-et-vient ni de mouvement circulaire. Recommencez toujours au début et passez plusieurs fois sur les zones à épiler afin de retirer tous les poils.
10
SED 3.7 D2
REMARQUE
Il peut arriver qu'après quelques jours, les poils se remettent
à pousser. Cela est lié au fait que lors de la dernière épila­tion, certains poils étaient trop courts pour être arrachés.
6) Lorsque vous avez terminé le traitement, faites glisser le commuta­teur de vitesse sur «0».
7) Nettoyez la tête d’épilation comme décrit dans le chapitre «Nettoyage et entretien».
8) Posez le capuchon d’épilation  sur la tête d’épilation .
REMARQUE
Si la tête d’épilation est endommagée, cessez de l’utiliser !
Pour commander une nouvelle tête d’épilation , veuillez vous adresser au service après-vente (cf. le chapitre «Garantie et service»). Ayez le numéro IAN à portée de main (voir la page de couverture du mode d’emploi). Pour remplacer la tête d’épilation , procédez comme suit :
Pressez les deux verrouillages et retirez en même
temps la tête d’épilation vers le haut.
Enfichez la nouvelle tête d’épilation  sur l’appareil.
Veillez à ce que les pignons de la tête d’épilation engrènent bien dans ceux de l’appareil. La tête d’épila­tion doit encranter de manière audible.
FR BE
SED 3.7 D2
11
Nettoyage et entretien
FR BE
RISQUE D'ÉLECTROCUTION
Avant chaque opération de nettoyage, coupez l'appareil de
l'adaptateur secteur et l'adaptateur secteur de la prise secteur.
ATTENTION - DÉGÂTS MATÉRIELS !
N'immergez jamais l'appareil dans de l'eau ou dans d'autres
liquides !
Après chaque utilisation, nettoyez la tête d’épilation  avec le
pinceau de nettoyage livré d’origine afin de retirer les poils détachés.
Désinfecter la tête d’épilation régulièrement, en la vaporisant
de spray désinfectant pour la nettoyer.
Pour procéder au nettoyage complet de la tête d’épilation ,
vous pouvez la retirer de l’appareil :
Pressez les deux verrouillages  et retirez en même temps
la tête d’épilation vers le haut.
Nettoyez la tête d’épilation à l’eau courante et laissez-la
sécher.
Remontez la tête d’épilation sur l’appareil. Veillez à ce que
les pignons de la tête d’épilation engrènent bien dans ceux de l’appareil. La tête d’épilation doit encranter de manière audible.
Essuyez l’appareil et l’adaptateur secteur  à l’aide d’un chiffon
humide. Si nécessaire, versez un peu de liquide vaisselle sur le chiffon. Avant l’utilisation suivante, assurez-vous que l’appareil a entièrement séché.
12
SED 3.7 D2
Stockage
Protégez toujours la tête d’épilation  à l’aide du capuchon de
protection fourni .
Rangez l’appareil, le pinceau de nettoyage  et l’adaptateur
secteur dans le sac de rangement .
Conservez l’appareil à un endroit sec et exempt de poussière.
Dépannage
Problème Cause Solution
L'appareil ne fonctionne pas.
L'appareil marche à vitesse réduite.
L'extraction des poils est très douloureuse.
Les poils ne sont pas tous saisis.
La batterie est déchargée.
L'appareil est défectueux.
La batterie est déchargée.
Les poils sont éven­tuellement trop longs.
Il est possible que les poils soient trop courts.
Vous travaillez trop vite.
Chargez l'appareil.
Adressez-vous au service clientèle.
Chargez l'appareil.
Raccourcissez les poils à env. 0,3 - 0,5 cm. Veuillez également tenir compte du chapitre «Conseils et astuces».
Les poils devraient avoir une longueur de 0,3 - 0,5 cm.
Déplacez l'appareil plus lentement sur la peau.
FR BE
SED 3.7 D2
13
Élimination de l’appareil
FR BE
Pour éliminer l’appareil en respectant l’environnement, vous devez en retirer la batterie.
RISQUE D'ÉLECTROCUTION
Retirez l'appareil du réseau électrique lorsque vous retirez la batterie !
ATTENTION - DÉGÂTS MATÉRIELS !
Ne retirez l'accu de l'appareil qu'à partir du moment où vous
avez l'intention de mettre l'appareil au rebut/de le recycler ! L'appareil est défectueux dès que vous avez retiré l'accu !
1) Détachez la tête d’épilation de l’appareil.
2) Levez les deux crans d’arrêt situés à l’intérieur à l’aide d’un petit tournevis ou d’un dispositif similaire et poussez-les vers l’extérieur, afin que les parties latérales de l’appareil puissent être détachées.
3) Desserrez les deux vis devenues visibles. Vous pouvez ensuite démonter le boîtier.
4) Sectionnez le fil rouge et le fil noir qui relient la carte avec la batterie à gaine bleue. Vous pouvez à présent retirer la batterie de l’appareil.
5) Procédez à une mise au rebut respectueuse de l’environnement de la batterie. Respectez la réglementation en vigueur. En cas de doute, prenez contact avec votre centre de recyclage.
14
SED 3.7 D2
L’appareil ne doit en aucun cas être jeté à
la poubelle des déchets domestiques. Ce produit est assujetti à la directive européenne 2012/19/EU.
Éliminez l’appareil par l’intermédiaire d’une entreprise de traitement des déchets autorisée ou via le service de recyclage de votre commune. Respectez la régle­mentation en vigueur. En cas de doute, prenez contact avec votre centre de recyclage.
Garantie et service
Cet appareil bénéficie de 3 ans de garantie à compter de la date d’achat. L’appareil a été fabriqué avec soin et consciencieusement contrôlé avant sa livraison
Veuillez conserver le ticket de caisse en guise de preuve d’achat. Dans le cas où la garantie s’applique, veuillez appeler le service après-vente compétent assurer l’expédition gratuite de votre marchandise
REMARQUE
La prestation en garantie s'applique uniquement aux vices
de matériaux ou aux défauts de fabrication, mais pas aux dommages du transport, aux pièces d'usure ou aux dom­mages subis par les pièces fragiles.
Le produit est uniquement destiné à un usage privé et ne répond pas à un usage professionnel. La garantie est annulée en cas de manipulation incorrecte et inappropriée, d’usage de la force et en cas d’intervention non réalisée par notre centre de service après-vente agréé.
Vos droits légaux ne sont pas restreints par la présente garantie. L’exercice de la garantie ne prolonge pas la période de garantie.
SED 3.7 D2
.
. Cette condition doit être respectée pour
.
FR BE
15
Cette disposition s’applique également aux pièces remplacées
FR
ou réparées.
BE
Signalez sans tarder toute anomalie éventuelle sur le matériel au moment de l’achat, au plus tard deux jours après la date d’achat.
Toute réparation fera l’objet d’une facturation après l’échéance de la période de garantie.
Indépendamment de la garantie commerciale souscrite, le vendeur reste tenu des défauts de conformité du bien et des vices rédhibitoires dans les conditions prévues aux articles L211-4 et suivants du Code de la consommation et aux articles 1641 et suivants du Code Civil.
Service France
Tel.: 0800 919270 E-Mail: kompernass@lidl.fr
IAN 273035
Service Belgique
Tel.: 070 270 171 (0,15 EUR/Min.) E-Mail: kompernass@lidl.be
IAN 273035
Heures de service de notre hotline :
du lundi au vendredi de 8 h à 20 h (HEC)
Importateur
KOMPERNASS HANDELS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www.kompernass.com
16
SED 3.7 D2
Inhaltsverzeichnis
Einführung .................................. 18
Urheberrecht ........................................18
Bestimmungsgemäße Verwendung .............18
Lieferumfang ................................19
Entsorgung der Verpackung .............................19
Bedienelemente. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Technische Daten .............................20
Sicherheitshinweise ...........................21
Netzbetrieb ................................. 24
Akkubetrieb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Tipps und Tricks ..............................25
Epilieren ....................................26
Reinigen und Pflegen ......................... 28
Lagerung ................................... 29
Fehlerbehebung .............................29
Entsorgung des Gerätes ....................... 30
Garantie und Service .........................31
Importeur ...................................32
DE AT
CH
SED 3.7 D2
17
Einführung
Herzlichen Glückwunsch zum Kauf Ihres neuen Gerätes.
DE
Sie haben sich damit für ein hochwertiges Produkt entschieden. Die
AT
Bedienungsanleitung ist Bestandteil dieses Produkts. Sie enthält wich-
CH
tige Hinweise für Sicherheit, Gebrauch und Entsorgung. Machen Sie sich vor der Benutzung des Produkts mit allen Bedien- und Sicher­heitshinweisen vertraut. Benutzen Sie das Produkt nur wie beschrie­ben und für die angegebenen Einsatzbereiche. Händigen Sie alle Unterlagen bei Weitergabe des Produkts an Dritte mit aus.
Urheberrecht
Diese Dokumentation ist urheberrechtlich geschützt. Jede Vervielfältigung, bzw. jeder Nachdruck, auch auszugsweise,
sowie die Wiedergabe der Abbildungen, auch im veränderten Zustand ist nur mit schriftlicher Zustimmung des Herstellers gestattet.
Bestimmungsgemäße Verwendung
Dieses Gerät ist ausschließlich zum Epilieren von menschlichen Haaren in privaten Haushalten bestimmt. Benutzen Sie es nicht gewerb­lich! Eine andere oder darüber hinausgehende Benutzung gilt als nicht bestimmungsgemäß.
Ansprüche jeglicher Art wegen Schäden aus nicht bestimmungsgemäßer Verwendung, unsachgemäßen Reparaturen, unerlaubt vorgenommenen Veränderungen oder Verwendung nicht zugelassener Ersatzteile sind ausgeschlossen.
Das Risiko trägt allein der Benutzer.
18
SED 3.7 D2
Lieferumfang
Das Gerät wird standardmäßig mit folgenden Komponenten geliefert:
Epilierer
Netzadapter
Reinigungspinsel
Aufbewahrungsbeutel
Bedienungsanleitung
Entnehmen Sie alle Teile des Gerätes aus dem Karton und entfernen Sie sämtliches Verpackungsmaterial. Prüfen Sie die Lieferung auf Vollständigkeit und auf sichtbare Schäden.
HINWEISE
Der Aufbewahrungsbeutel befindet sich bei Auslieferung
unter der Kunststoffschale, in der sich das Gerät befindet. Sie müssen die Pappe unter der Kunststoffschale entfernen, um den Aufbewahrungsbeutel herausnehmen zu können.
Bei einer unvollständigen Lieferung oder Schäden infolge
mangelhafter Verpackung oder durch Transport wenden Sie sich an die Service-Hotline (siehe Kapitel Garantie und Service).
Entsorgung der Verpackung
Die Verpackung schützt das Gerät vor Transportschäden. Die Verpa­ckungsmaterialien sind nach umweltverträglichen und entsorgungs­technischen Gesichtspunkten ausgewählt und deshalb recyclebar.
Die Rückführung der Verpackung in den Materialkreislauf spart Rohstoffe und verringert das Abfallaufkommen. Entsorgen Sie nicht mehr benötigte Verpackungsmaterialien gemäß den örtlich geltenden Vorschriften.
DE AT
CH
SED 3.7 D2
19
Bedienelemente
Abbildung A:
DE AT
CH
Schutzkappe Epilierkopf Verriegelungen für Epilierkopf Reisesicherung Geschwindigkeitsschalter Kontrollleuchte rot/grün Buchse für Netzadapter
Abbildung B:
Netzadapter Aufbewahrungsbeutel Reinigungspinsel
Technische Daten
Netzadapter
Typ ZDJ045100EU
Eingangsspannung 100 - 240 V ~, 50/60 Hz
Stromaufnahme 0,2 A Max.
Ausgangsspannung 4,5 V
Ausgangsstrom 1000 mA
Schutzklasse
Polarität
20
II /
SED 3.7 D2
Gerät
Eingangsspannung 4,5 V
Stromaufnahme 1000 mA
Akku 3,7 V
700mAh Li-ion Akku
Sicherheitshinweise
STROMSCHLAGGEFAHR
Schließen Sie das Gerät nur an eine vorschrifts-
mäßig installierte Netzsteckdose mit einer Netz­spannung von 100 - 240 V ~ / 50/60 Hz an.
Die Anschlussleitung dieses Gerätes kann nicht
ersetzt werden. Bei Beschädigung der Leitung ist das Gerät zu verschrotten.
Ziehen Sie bei Betriebsstörungen und bevor Sie
das Gerät reinigen, den Netzadapter aus der Netzsteckdose.
Ziehen Sie das Netzkabel stets am Netzadap-
ter aus der Netzsteckdose, ziehen Sie nicht am Kabel selbst.
Knicken oder quetschen Sie das Netzkabel nicht
und verlegen Sie das Netzkabel so, dass nie­mand darauf treten oder darüber stolpern kann.
DE AT
CH
SED 3.7 D2
21
DE AT
CH
STROMSCHLAGGEFAHR
Achten Sie darauf, dass im Betrieb das Netzka-
bel nicht nass oder feucht wird. Führen Sie es so, dass es nicht eingeklemmt oder beschädigt werden kann.
Sollte das Gerät beschädigt sein, benutzen Sie
es auf keinen Fall weiter, um Gefährdungen zu vermeiden.
Verwenden Sie das Gerät nicht im Freien.Wickeln Sie das Netzkabel nicht um das Gerät
und schützen Sie es vor Beschädigungen.
Fassen Sie das Gerät, Netzkabel und -stecker
nie mit nassen Händen an.
ACHTUNG! Das Gerät trocken halten.
Verwenden Sie das Gerät niemals in der Nähe von Wasser, insbesondere nicht in der Nähe von Waschbecken, Badewannen oder ähnlichen Gefäßen. Die Nähe von Wasser stellt eine Gefahr dar, auch wenn das Gerät ausgeschaltet ist. Ziehen Sie daher nach jedem Gebrauch den Netzadapter. Als zusätzlicher Schutz wird Ihnen die Installation einer Fehlerstrom-Schutzeinrichtung mit einem Bemessungsauslösestrom von nicht mehr als 30 mA im Badezimmer-Stromkreis empfohlen. Fragen Sie Ihren Elektroinstallateur um Rat.
22
SED 3.7 D2
WARNUNG! VERLETZUNGSGEFAHR!
Falls das Gerät heruntergefallen oder beschädigt
ist, dürfen Sie es nicht mehr in Betrieb nehmen. Lassen Sie das Gerät von qualifiziertem Fachper­sonal überprüfen und gegebenenfalls reparieren.
Sie dürfen das Gerätegehäuse nicht selbst
öffnen oder reparieren. In diesem Falle ist die Sicherheit nicht gegeben und die Gewährleis­tung erlischt. Lassen Sie das defekte Gerät nur von autorisiertem Fachpersonal reparieren.
Benutzen Sie das Gerät nur mit dem mitgeliefer-
ten Netzadapter.
Laden Sie das Gerät nur mit dem mitgelieferten
Netzadapter auf.
Dieses Gerät kann von Kindern ab 8 Jahren
und darüber sowie von Personen mit verringer­ten physischen, sensorischen oder mentalen Fähigkeiten oder Mangel an Erfahrung und Wissen benutzt werden, wenn sie beaufsichtigt oder bezüglich des sicheren Gebrauchs des Gerätes unterwiesen wurden und die daraus resultierenden Gefahren verstehen.
Kinder dürfen nicht mit dem Gerät spielen.Reinigung und Benutzer-Wartung dürfen nicht
von Kindern ohne Beaufsichtigung durchgeführt werden.
DE AT
CH
SED 3.7 D2
23
ACHTUNG - SACHSCHADEN!
DE AT
CH
Benutzen Sie das Gerät nur in Innenräumen.
Netzbetrieb
1) Stecken Sie den Anschlussstecker des Netzadapters  in die Buchse am Gerät. Stellen Sie sicher, dass der Geschwindig­keitsschalter auf „0“ steht.
2) Stecken Sie den Netzadapter in eine Netzsteckdose. Die Kontrollleuchte  leuchtet rot und zeigt damit den Aufladevor- gang an.
Das Gerät ist sofort betriebsbereit.
Akkubetrieb
1) Stecken Sie den Anschlussstecker des Netzadapters  in die Buchse am Gerät. Stellen Sie sicher, dass der Geschwindig­keitsschalter auf „0“ steht.
2) Stecken Sie den Netzadapter in eine Netzsteckdose. Die Kontrollleuchte  leuchtet rot und zeigt damit den Aufladevor- gang an.
Sobald die Kontrollleuchte grün leuchtet, ist das Gerät vollständig geladen und Sie können das Gerät vom Stromnetz trennen.
HINWEIS
Beim ersten Aufladen benötigt das Gerät ca. 80 Minuten,
um vollständig aufzuladen.
Laden Sie das Gerät erst wieder auf, wenn die Kontrollleuch-
te durch abwechselndes rot-grünes Blinken eine niedrige Akkuladung anzeigt.
24
SED 3.7 D2
Tipps und Tricks
HINWEIS
Benutzen Sie das Gerät nicht, wenn...
Sie einen Sonnenbrand an den betroffenen Körperstel-
len haben.
Hautreizungen oder -rötungen vorliegen.Sie eine Hautkrankheit, wie zum Beispiel Neurodermitis,
haben.
Sie Pickel, Muttermale oder Warzen an den betroffe-
nen Körperstellen haben.
Sie Wunden, offene Wunden oder erhabene Narben
an den betroffenen Körperstellen haben.
Testen Sie das Gerät erst an einer kleinen versteckten Stelle,
um die Hautverträglichkeit zu testen.
Die Haare sollten zwischen 0,3 cm und 0,5 cm lang sein. Kürze-
re Haare ergreifen die Pinzetten nicht und das Herauszupfen von längeren Haaren ist sehr schmerzhaft. Kürzen Sie längere Haare gegebenenfalls.
Die Haut muss frei von Fett- oder Cremerückständen sein. Ansons-
ten verkleben/verschmutzen die Pinzetten und die Leistung des Gerätes wird vermindert.
Die Haut muss vollständig trocken sein.
Epilieren Sie am Besten am Abend nach dem Duschen. Dann ist
die Haut etwas aufgeweicht, so dass die Haare leichter herausge­zupft werden können. Außerdem kann sich die Haut in der Nacht erholen und eventuelle Hautrötungen gehen zurück.
DE AT
CH
SED 3.7 D2
25
Behandeln Sie die Haut vor dem Epilieren mit einem Peeling oder
einem Massagehandschuh. Dadurch werden abgestorbene Haut-
DE AT
CH
schüppchen entfernt, einwachsende Haare werden vermieden und feine Haare stellen sich auf. Dadurch kann das Gerät die Haare besser greifen.
Pflegen Sie die Haut nach dem Epilieren mit einer Feuchtigkeitslo-
tion oder einer Creme. Idealerweise enthält die Creme Aloe Vera oder Kamillenextrakte, um die Haut zu beruhigen und zu pflegen.
Epilieren
Wenn das Gerät aufgeladen ist und die zu epilierenden Körperstel­len vorbereitet sind:
1) Streichen Sie mit der Hand noch einmal gegen die Wuchsrich­tung über die zu entfernenden Haare. Damit richten Sie diese auf, so dass die Haare besser von den Pinzetten erfasst werden können.
2) Nehmen Sie die Schutzkappe vom Epilierkopf ab.
3) Drücken Sie die Reisesicherung und schieben Sie den Geschwindigkeitsschalter nach oben auf die gewünschte Geschwindigkeitsstufe:
Stufe 1: für empfindliche Zonen (Achselbereich und Bikinizone)Stufe 2: für Beine
4) Halten Sie mit der einen Hand die Haut straff.
5) Setzen Sie den Epilierer senkrecht auf die Haut und fahren Sie ohne Druck auszuüben entgegen der Haarwuchsrichtung darü­ber. Die Seite mit dem Geschwindigkeitsschalter  muss dabei zu Ihnen weisen. Führen Sie keine Hin- und Herbewegungen oder Kreisbewegungen aus. Setzen Sie immer wieder neu an und fahren Sie mehrmals über die zu epilierenden Stellen, so dass alle Haare entfernt werden.
26
SED 3.7 D2
HINWEIS
Es kann sein, dass nach wenigen Tagen wieder Haare
nachwachsen. Das liegt daran, dass diese Haare während des letzten Epilierens noch zu kurz waren, um entfernt zu werden.
6) Wenn Sie mit der Behandlung fertig sind, schieben Sie den Geschwindigkeitsschalter  auf „0“.
7) Reinigen Sie den Epilierkopf wie im Kapitel „Reinigen und Pflegen“ beschrieben.
8) Setzen Sie die Schutzkappe  auf den Epilierkopf .
HINWEIS
Wenn der Epilierkopf beschädigt ist, benutzen Sie diesen
nicht weiter! Um einen neuen Epilierkopf zu bestellen, wenden Sie sich an den Service (siehe Kapitel „Garantie und Service“). Halten Sie die IAN-Nummer bereit (siehe Cover der Bedienungsanleitung). Um den Epilierkopf  auszutauschen, gehen Sie folgender- maßen vor:
Drücken Sie die beiden Verriegelungen  zusammen
und ziehen Sie gleichzeitig den Epilierkopf nach oben ab.
Stecken Sie den neuen Epilierkopf  auf das Gerät.
Achten Sie darauf, dass die Zahnräder am Epilierkopf und am Gerät ineinander greifen. Der Epilierkopf muss hörbar einrasten.
DE AT
CH
SED 3.7 D2
27
Reinigen und Pflegen
DE AT
CH
STROMSCHLAGGEFAHR
Trennen Sie vor jeder Reinigung das Gerät vom Netzadapter
und den Netzadapter vom Stromnetz.
ACHTUNG - SACHSCHADEN!
Tauchen Sie das Gerät niemals in Wasser oder andere
Flüssigkeiten!
Reinigen Sie nach jeder Benutzung den Epilierkopf  mit dem
mitgelieferten Reinigungspinsel , um lose Haare zu entfernen.
Desinfizieren Sie den Epilierkopf regelmäßig, indem Sie ihn
mit Desinfektionsspray besprühen und reinigen.
Um den Epilierkopf  gründlich zu reinigen, können Sie diesen
vom Gerät abnehmen:
Drücken Sie die beiden Verriegelungen  zusammen und
ziehen Sie gleichzeitig den Epilierkopf nach oben ab.
Reinigen Sie den Epilierkopf unter fließendem Wasser und
lassen Sie ihn trocknen.
Stecken Sie den Epilierkopf  wieder auf das Gerät. Achten
Sie darauf, dass die Zahnräder am Epilierkopf und am Gerät ineinander greifen. Der Epilierkopf  muss hörbar einrasten.
Wischen Sie das Gerät und den Netzadapter  mit einem
feuchten Tuch ab. Bei Bedarf geben Sie ein mildes Reinigungs­mittel auf das Tuch. Stellen Sie sicher, dass das Gerät vor der nächsten Benutzung vollständig trocken ist.
28
SED 3.7 D2
Lagerung
Schützen Sie den Epilierkopf  immer mit der mitgelieferten
Schutzkappe .
Bewahren Sie das Gerät, den Reinigungspinsel  und den Netz-
adapter in dem Aufbewahrungsbeutel  auf.
Bewahren Sie das Gerät an einem trockenen und staubfreien Ort
auf.
Fehlerbehebung
Problem Ursache Lösung
Das Gerät funktioniert nicht.
Das Gerät läuft nur langsam.
Das Herauszup­fen der Haare ist sehr schmerzhaft.
Es werden nicht alle Haare erfasst.
Der Akku ist leer. Laden Sie das Gerät.
Das Gerät ist defekt.
Der Akku ist leer. Laden Sie das Gerät.
Die Haare sind even­tuell zu lang.
Es ist möglich, dass die Haare zu kurz sind.
Sie arbeiten zu schnell.
Wenden Sie sich an den Kundenservice.
Kürzen Sie die Haare auf ca. 0,3 - 0,5 cm. Beachten Sie auch das Kapitel „Tipps und Tricks“.
Die Haare sollten eine Länge von 0,3 - 0,5 cm haben.
Bewegen Sie das Gerät langsamer über die Haut.
DE AT
CH
SED 3.7 D2
29
Entsorgung des Gerätes
Um das Gerät umweltgerecht zu entsorgen, müssen Sie den Akku
DE
aus dem Gerät entfernen.
AT
CH
STROMSCHLAGGEFAHR
Entfernen Sie das Gerät vom Stromnetz, wenn Sie den Akku entfernen!
ACHTUNG - SACHSCHADEN!
Entnehmen Sie den Akku nur aus dem Gerät, wenn Sie das
Gerät entsorgen/verschrotten wollen! Das Gerät ist defekt, wenn Sie den Akku ausgebaut haben!
1) Nehmen Sie den Epilierkopf  vom Gerät.
2) Heben Sie die beiden innenliegenden Arretierungen mit einem kleinem Schraubendreher oder ähnlichem nach oben und drü­cken Sie sie nach außen, so dass sich die Seitenteile des Gerätes lösen lassen.
3) Lösen Sie die beiden nun sichtbaren Schrauben. Sie können dann das Gehäuse auseinander nehmen.
4) Kneifen Sie das rote und das schwarze Kabel, welches die Plati­ne mit dem blau ummantelten Akku verbindet, durch. Sie können nun den Akku aus dem Gerät entfernen.
5) Entsorgen Sie den Akku umweltgerecht. Beachten Sie die aktuell geltenden Vorschriften. Setzen Sie sich im Zweifelsfall mit Ihrer Entsorgungseinrichtung in Verbindung.
30
SED 3.7 D2
Werfen Sie das Gerät keinesfalls in den nor-
malen Hausmüll. Dieses Produkt unterliegt der europäischen Richtlinie 2012/19/EU.
Entsorgen Sie das Gerät über einen zugelassenen Entsorgungsbetrieb oder über Ihre kommunale Entsor­gungseinrichtung. Beachten Sie die aktuell geltenden Vorschriften. Setzen Sie sich im Zweifelsfall mit Ihrer Entsorgungseinrichtung in Verbindung.
Garantie und Service
Sie erhalten auf dieses Gerät 3 Jahre Garantie ab Kaufdatum. Das Gerät wurde sorgfältig produziert und vor Anlieferung gewissenhaft geprüft.
Bitte bewahren Sie den Kassenbon als Nachweis für den Kauf auf. Bitte setzen Sie sich im Garantiefall mit Ihrer Servicestelle telefonisch in Verbindung. Nur so kann eine kostenlose Einsendung Ihrer Ware gewährleistet werden.
HINWEIS
Die Garantieleistung gilt nur für Material- oder Fabrikations-
fehler, nicht aber für Transportschäden, Verschleißteile oder für Beschädigungen an zerbrechlichen Teilen.
Das Produkt ist lediglich für den privaten und nicht für den gewerb­lichen Gebrauch bestimmt. Bei missbräuchlicher und unsachgemäßer Behandlung, Gewaltanwendung und bei Eingriffen, die nicht von unserer autorisierten Service-Niederlassung vorgenommen wurden, erlischt die Garantie.
Ihre gesetzlichen Rechte werden durch diese Garantie nicht ein­geschränkt. Die Garantiezeit wird durch die Gewährleistung nicht verlängert. Dies gilt auch für ersetzte und reparierte Teile.
SED 3.7 D2
DE AT
CH
31
Eventuell schon beim Kauf vorhandene Schäden und Mängel müssen sofort nach dem Auspacken gemeldet werden, spätestens aber zwei Tage nach Kaufdatum.
DE
Nach Ablauf der Garantiezeit anfallende Reparaturen sind
AT
kostenpflichtig.
CH
Service Deutschland
Tel.: 0800 5435 111 (Kostenfrei aus dem dt. Festnetz/Mobilfunknetz) E-Mail: kompernass@lidl.de
IAN 273035
Service Österreich
Tel.: 0820 201 222 (0,15 EUR/Min.) E-Mail: kompernass@lidl.at
IAN 273035
Service Schweiz
Tel.: 0842 665566 (0,08 CHF/Min., Mobilfunk max. 0,40 CHF/Min.) E-Mail: kompernass@lidl.ch
IAN 273035
Erreichbarkeit Hotline:
Montag bis Freitag von 8:00 Uhr – 20:00 Uhr (MEZ)
Importeur
KOMPERNASS HANDELS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www.kompernass.com
32
SED 3.7 D2
Table of Contents
Introduction .................................34
Copyright ...........................................34
Intended Use ................................ 34
Items supplied ...............................35
Disposal of packaging .................................35
Operating Elements ........................... 36
Technical data ...............................36
Safety instructions ............................ 37
Mains power operation .......................40
Battery operation ............................ 40
Tips and Tricks ...............................41
Epilation ....................................42
Cleaning and Care ............................ 44
Storage ....................................45
Troubleshooting .............................45
Disposal of the appliance ......................46
Warranty and Service ........................ 47
Importer .................................... 48
GB
SED 3.7 D2
33
Introduction
Congratulations on the purchase of your new appliance. You have clearly decided in favour of a quality product. These oper-
ating instructions are a part of this product. They contain important information in regard to safety, use and disposal. Before using the product, familiarise yourself with all of these operating and safety
GB
instructions. Use the product only as described and only for the specified areas of application. In addition, pass these documents on, together with the product, to any future owner.
Copyright
This documentation is copyright protected. Any copying or reproduction, including as extracts, as well as the
reproduction of images, also in an altered state, is only permitted with the written authorisation of the manufacturer.
Intended Use
This appliance is intended exclusively for the epilation of human hair in domestic households. Do not use it for commercial purposes! This appliance is not intended for any other use or for uses beyond those mentioned.
Claims of any kind resulting from damage caused by improper use, incompetent repairs, unauthorised modifications or the use of non­approved spare parts will not be acknowledged.
The operator alone bears the risk.
34
SED 3.7 D2
Items supplied
The appliance is supplied with the following components as standard:
Cordless Epilator
Mains adapter
Cleaning brush
Storage pouch
Operating Instructions
Extract all parts of the appliance from the carton and remove all packaging material. Check the contents to ensure everything has been supplied, and for signs of visible damage.
TIPS
As delivered, the storage pouch is located under the plastic
shell containing the device itself. You must remove the cardboard under the plastic shell in order to take the storage pouch out.
If the delivery is incomplete, or has been damaged due to
defective packaging or transportation, contact the Service Hotline (see chapter Warranty and Service).
Disposal of packaging
The packaging protects the appliance against transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit
saves on raw material and reduces generated waste. Dispose of packaging material that is no longer needed as per the regionally established regulations .
GB
SED 3.7 D2
35
Operating Elements
Figure A:
 Protective cap Epilator head
GB
Restraint fixtures for epilator head Travel lock Speed switch Control lamps red/green Socket for mains adapter
Figure B:
Mains power adapter Storage pouch Cleaning brush
Technical data
Mains adapter
Type ZDJ045100EU
Input voltage 100 - 240 V ~, 50/60 Hz
Power consumption 0.2 A Max.
Output voltage 4.5 V
Output current 1000 mA
Protection class
Polarity
36
II/
SED 3.7 D2
Device
Input voltage 4.5 V
Power consumption 1000 mA
Batteries 3,7 V
700mAh Lithium ion battery
Safety instructions
RISK OF ELECTRIC SHOCK
Connect the appliance only to correctly in-
stalled mains power sockets supplying a current rating of 100 - 240 V ~ / 50/60 Hz.
The power cable on this appliance cannot be
replaced. In the event of it being damaged the whole appliance must be disposed of.
In the event of operational malfunction, and
for cleaning, always remove the plug from the mains power socket.
To disconnect the power cable, always pull
the plug itself from the mains power socket, do not pull on the cable.
Do not kink or crimp the power cable and
place it in such a way as to prevent anyone from stepping on or tripping over it.
GB
SED 3.7 D2
37
GB
RISK OF ELECTRIC SHOCK
Ensure that the power cable cannot become
wet or moist during operation. Place it such that it cannot be squashed or damaged.
To avoid risks, should the appliance be dam-
aged discontinue the use of it immediately.
Do not use the appliance outdoors.Do not wrap the power cable around the ap-
pliance and protect it from being damaged.
NEVER grasp the appliance, power cable or
plug with wet hands.
TAKE NOTE! Keep the appliance dry.
Never use the appliance near water, particu­larly not near sinks, baths or other vessels. The proximity of moisture presents a danger, even when the appliance is switched off. After use, always remove the plug from the mains power socket. As additional protection, the installation of a faulty-current protection unit with an activation power rating of not more than 30 mA is recommended for the power circuit in the bathroom. Consult your electrician for advice.
38
SED 3.7 D2
WARNING! RISK OF INJURY!
Do not operate the appliance if it has sustained
a fall or is damaged. Arrange for the appliance to be checked and/or repaired by qualified technicians.
Do not open the housing or attempt to repair
the appliance yourself. Should you do so, ap­pliance safety can no longer be assured and the warranty will become void. Permit only authorised technicians to repair a defective appliance if repairs should be necessary.
Use the appliance only with the supplied power
adapter.
Charge the appliance only with the supplied
power adapter.
This appliance may be used by children aged 8
over and by persons with reduced physical, senso­ry or mental capabilities or lack of experience and knowledge, provided that they are under supervi­sion or have been told how to use the appliance safely and are aware of the potential risks.
Children must not play with the appliance.Cleaning and user maintenance tasks must
not be carried out by children unless they are supervised.
GB
SED 3.7 D2
39
WARNING - PROPERTY DAMAGE!
Use the appliance only indoors.
Mains power operation
GB
1) Insert the connector plug of the mains power adapter into the socket for mains adapter on the appliance. Ensure that the speed switch is set at “0”.
2) Connect the mains power adapter  to a mains power socket. The control lamp glows red to indicate that the charging process is active.
The appliance is ready for immediate use.
Battery operation
1) Insert the connector plug of the mains power adapter into the socket for mains adapter on the appliance. Ensure that the speed switch is set at “0”.
2) Connect the mains power adapter  to a mains power socket. The control lamp glows red to indicate that the charging process is active.
As soon as the control lamp glows green the appliance is fully charged and you can disconnect it from the mains power supply.
NOTICE
For the initial charging, the appliance requires about
80 minutes to fully charge.
First recharge the appliance when the control lamps  indi-
cate, by alternately flashing red and green, that the battery charge level is low..
40
SED 3.7 D2
Tips and Tricks
NOTICE
Do not use the appliance if...
You have a sunburn on the specific part of the body.Skin irritation or redness is extant.You have a skin disease such as, for example,
neurodermatitis.
You have pimples, moles or warts on the specific parts
of the body.
You have wounds, open sores or raised scars on the
specific parts of the body.
First test the appliance on a small hidden location to establish
the skin compatibility.
The hairs should be between 0.3 cm and 0.5 cm long. Shorter
hairs are not gripped by the tweezers and plucking out longer hairs is very painful. If needs be, shorten long hair.
The skin must be free of grease or cream residues. Otherwise, the
tweezers will stick/soil and the efficiency of the appliance will be reduced.
The skin must be completely dry.
The best time for epilation is in the evening after a shower. Then
the skin is somewhat softened, so that the hairs can be plucked out easily. In addition, the skin can recover overnight, and any skin reddening will recede.
GB
SED 3.7 D2
41
Before epilation, treat the skin with a peeling or a massage glove.
This helps remove dead skin cells, ingrowing hairs are avoided, and fine hairs stand proud. This enables the appliance to grip the hairs better.
After epilation, nurture the skin with a moisturising lotion or
GB
cream. Ideally, the cream will contain aloe vera or camomile extracts to soothe and maintain the skin.
Epilation
When the appliance is charged and the body part to be epilated is prepared:
1) Rub your hand once more against the growth direction of the hairs to be removed. Through this the hairs will be raised so that they can be better captured by the tweezers.
2) Remove the protective cap from the epilator head .
3) Press the travel lock  and slide the speed switch  upwards to the desired speed level:
Level 1: for sensitive areas (armpits and bikini line)Level 2: for legs
4) Hold the skin tight with one hand.
5) Place the epilator perpendicular to the skin and, without exerting any pressure, move it against the direction of the hair growth. Thereby, the side with the speed switch must face towards you. Do not make back and forth or circular movements. Always start anew and pass over the body part to be epilated several times, so that all of the hair is removed.
42
SED 3.7 D2
NOTICE
It may be that the hair grows back after a few days. The
reason for this is that these hairs were too short to be removed during the last epilation session.
6) When you are finished with the treatment, place the speed switch to “0”.
7) Clean the epilator head as described in the section “Cleaning and Care”.
8) Replace the protective cap on the epilator head .
NOTICE
If the epilator head is damaged, discontinue all further use!
To order a new epilator head , please contact the service de- partment (see chapter “Guarantee and service”). Please have the IAN number ready (see operating manual cover). To replace the epilator head , please proceed as follows:
Press the two restraint fixtures together and at the
same time pull the epilator head upwards.
Press the new epilator head onto the appliance.
Ensure that the gears on the epilator head  and on the appliance mesh with each other. The epilator head must audibly engage.
GB
SED 3.7 D2
43
Cleaning and Care
RISK OF ELECTRIC SHOCK
Before cleaning, disconnect the appliance from the mains
power adapter and the mains power adapter from the
GB
main power supply.
WARNING - PROPERTY DAMAGE!
NEVER submerse the appliance in water or other liquids!
After every use clean the epilator head with the supplied
cleaning brush to remove loose hairs.
Disinfect the epilator head regularly by spraying and cleaning
it with disinfectant spray.
To thoroughly clean the epilator head  you can remove it from
the appliance:
Press the two restraint fixtures together and at the same
time pull the epilator head upwards.
Clean the epilator head under running water and then
allow it to dry.
Place the epilator head back onto the appliance. Ensure
that the gears on the epilator head and on the appliance mesh with each other. The epilator head must audibly engage.
Clean the appliance housing and the mains power adapter
with a moist cloth. If required, use some mild detergent on the cloth. Ensure that the appliance is completely dry before the next use.
44
SED 3.7 D2
Storage
Always protect the epilator head  with the supplied protective
cap .
Store the appliance, the cleaning brush  and the mains power
adapter  in the storage pouch .
Store the appliance at a dry and dustfree location.
Troubleshooting
Problem Cause Solution
The appliance does not function.
The appliance only runs slowly.
The plucking of the hairs is very painful.
Not all hairs are plucked.
The battery is drained.
The appliance is defective.
The battery is drained.
The hairs may be too long.
It is possible that the hairs are too short.
You are working too fast.
Recharge the appliance.
In this case, contact Customer Services.
Recharge the appliance.
Shorten the hairs to about 0.3 - 0.5 cm. See also the section "Tips and Tricks".
The hairs should have a length of
0.3 - 0.5 cm. Move the appliance
more slowly over your skin.
GB
SED 3.7 D2
45
Disposal of the appliance
To dispose of the appliance in an environmentally friendly manner you must remove the battery from the appliance.
RISK OF ELECTRIC SHOCK
GB
Disconnect the appliance from the mains power supply when you remove the battery!
WARNING - PROPERTY DAMAGE!
Only remove the battery from the appliance if you want to
dispose of/scrap it! The appliance is defective when you have removed the battery!
1) Take the epilator head from the appliance.
2) Lift the two internal restraints with a small screwdriver or similar to the top and press them outwards, so that the side elements of the appliance can be released.
3) Loosen the two now visible screws. You can then take the housing apart.
4) Snip the red and black cable that connects the circuit board with the blue-jacketed battery. You can now remove the battery from the appliance.
5) Dispose of the battery environmentally friendly. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
46
SED 3.7 D2
Do not dispose of the appliance in your
normal domestic waste. This product is subject to the provisions of European Directive 2012/19/EU.
Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
Warranty and Service
The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery.
Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured.
NOTICE
The warranty applies to material or manufacturing faults
only, not for transport damage, parts subject to wear and tear or for damage to fragile parts.
This appliance is intended solely for domestic, not commercial, use. If this product has been subjected to improper or inappropriate handling, abuse, or modifications not carried out by one of our authorised service centres, the warranty will be considered void.
Your statutory rights are not restricted in any way by this warranty. The warranty period is not extended by repairs made under the warranty. This applies also to replaced and repaired parts.
GB
SED 3.7 D2
47
Damages and defects extant at the time of purchase must be reported immediately after unpacking, resp. no later than two days after the date of purchase.
Repairs carried out after lapse of the warranty period are subject to charge.
Service Great Britain
GB
Tel.: 0871 5000 720 (£ 0.10/Min.) E-Mail: kompernass@lidl.co.uk
IAN 273035
Hotline availability: Monday to Friday 08:00 - 20:00 (CET)
Importer
KOMPERNASS HANDELS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www.kompernass.com
48
48
SED 3.7 D2
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21 44867 BOCHUM DEUTSCHLAND / GERMANY www.kompernass.com
Version des informations · Stand der Informationen Last Information Update: 10 / 2015 · Ident.-No.: SED3.7D2-092015-2
IAN 273035
2
Loading...