Sharp 32JF-77H, 32JF77 Manual

0 (0)

COLOUR TELEVISION

OPERATION MANUAL

32JF-77H

PRINTED ON ENVIRONMENTALLY FRIENDLY PAPER

Please read this operation manual carefully

before using the colour television.

Dear SHARP Customer

Congratulations! You are now the proud owner of a SHARP Colour Television Receiver. To

ensure proper operation, please read this manual carefully. After reading, keep this manual in a

safe place for future reference.

TERMS OF GUARANTEE

Subject to the conditions listed below Sharp Electronics (U.K.) Ltd. (Hereinafter called «the Com-

pany») guarantee to provide for the repair of, or at its option replace the Sharp Equipment, or any

component thereof, (other than Batteries), which is faulty or below standard, as a result of inferior

workmanship or materials.

The conditions of the guarantee are:

1. This guarantee shall only apply to defects or faults which are notified to the Company, or its

approved Service Facility within one year from the date of purchase of the equipment.

2. This guarantee covers equipment intended for private domestic use only. This guarantee does

not apply to equipment used in the course of a business, trade or profession.

3. This guarantee does not cover any faults or defects caused by accident, misuse, fair wear and

tear, neglect, tamper ing with the equipment, or any attempt at adjustment or repair other than

by an approved Service Facility.

4. In the unlikely event of that your equipment should require repair, please contact the dealer or

supplier from whom it was purchased.

5. The cost of carriage to and from the Dealer, Supplier or Sharp approved Service Facility shall

be borne by the pur chaser.

6. No person has any authority to vary the terms or conditions of this guarantee.

7. This guarantee is offered as an additional benefit to the consumer’s statutory rights and does

not affect rights in any way.

In the unlikely event of this equipment requiring repair during the guarantee period, you will need

to provide proof of date of purchase to the repairing company.

Please keep your invoice or receipt, which is supplied at the time of purchase.

Safety Precautions

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC.

The tube of your TV has a special coating.

Do not knock or rub on the tube face with

sharp or hard surfaces, otherwise you will

damage the coating.

To prevent damaging the surface of the

television screen, remove finger prints only

with a soft cloth dampened with glass

cleaner. Do not use any abrasive cleaners.

Do not use thinner, benzene or other strong

chemical cleaners.

To prevent fire or electrical shock, do not

use the TV set in an excessively damp place.

Position the TV set out of direct sunlight and

away from heat, as high temperatures can

damage the cabinet, CRT, or other electronic

parts.

Don't cover ventilation salts with objects such

as newspapers, tablecloths, curtains, etc.

Do not cover the ventilation holes at the back

of the TV set, this can cause fire or other

serious problems. Leave an adequate open

space behind the TV set for good ventilation.

Always disconnect your television from the

mains and the aerial cable during

thunderstorms.

Even if your television is switched off, it can

still be damaged by lightning striking the

mains and/or aerial cable.

Unplug the power cord from the wall outlet

immediately if the TV set begins to make

unusual noises or give off smoke or an odd

smell, then call your dealer for service.

In order to ensure that the television is

properly ventilated, leave a space of at least

10 cm around the set.

Do not install this equipment in a confined

space such as a bookcase or a built-in

cabinet.

Television equipment and cart combination

should be moved with care. Quick stops,

excessive force and uneven surfaces may

cause the equipment and cart combination

to overturn.

Wall or shelf mounting should follow the

manufacturer’s instructions, and should use

a mounting kit approved by the

manufacturer.

To prevent electrical shock, do not subject

the AC power cord to damage by bending or

twisting it, or by placing heavy items on top

of it and do not place the AC power cord

under the TV set. If the AC power cord

becomes damaged, unplug it from the wall

outlet immediately and call your dealer for

service.

Do place the TV set onto an even stand,

table or track which size is bigger than the

TV set.

If the TV set is put onto a smaller size or

uneven stand, table or track may cause the

TV cabinet distort. Do not put or insert

anything between TV set and the stand, table

or track.

In order to prevent electrical shocks and fires,

ensure that the television is not subjected to

splashes or spills of water, and avoid inserting

objects or pouring any type of liquid into the set.

To prevent fire, never place any type of candle or

naked flames on the top or near the TV set.

In the case that an object or liquid enters the set,

don't use and contact technical service.

Never remove the back of the cabinet, as

there is high voltage in the TV set.

Please call for service.

Do not place this television equipment on an

unstable cart, stand or table. The television

equipment may fall, causing serious injury

to a child or an adult, and serious damage to

the equipment.

Use only with a cart or stand recommended

by the manufacturer, or sold with the

television equipment.

CAUTION:For environmental and safety reasons, it is recommended that the

television isn't left in stand-by mode while not in use. Switch it off using the main

button and unplug it during periods of absence from the home.

Respect the environ-

ment and put used bat-

teries in a container that

is especially designed

for this purpose.

Remote Control Battery Installation

Contents

Terms of guarantee.......................................................... 1

Safety precaution ............................................................ 2

Contents .......................................................................... 3

Accessories ..................................................................... 3

Remote Control Battery Installation ................................ 3

Remote Control buttons .................................................. 4

Controls and Terminals ................................................... 5

Aerial Connections (Typical Connections) ....................... 6

Auto Installation ............................................................. 11

Switching on .................................................................. 13

Menu Structures..............................................................14

TV operation (Channel selection) .................................. 16

Picture Adjustments ...................................................... 17

Wide Mode .................................................................... 20

Double Window ............................................................. 22

Audio Adjustments..........................................................24

Sound Setting Mode.......................................................25

Features setting mode:

On Timer and Off Timer.......................................... 29

Child Lock (Channel Block) ................................... 30

Postcode Security.................................................. 32

Help and Demo ...................................................... 33

AV LINK ................................................................. 34

TV Channel Setting (Advanced):

To repeat the AUTO INSTALLATION .................... 36

Manual Channel Preset ......................................... 37

After preset has been performed .......................... 38

TV/VIDEO Selector, Headphone Jack, Sub-titles

and VCR Mode .............................................................. 40

Teletext Mode ............................................................... 42

21-pin Euro-SCART and 21-pin Audio/Video ............... 45

Troubleshooting ............................................................ 46

General Specifications for Television Receiver ............. 47

Index page ..................................................................... 48

Remote control

Type-AA dry batteries

Operation manual

Before using the TV set for the first time, install the supplied dry batteries in the remote control.

• Remove batteries if weak or if the unit is not in use for long periods.

• Do not mix old and new batteries.

• Incorrect installation of the batteries may damage the remote control.

Note:

1. With your thumb nail, pull up

the slit as indicated by the

arrow to remove the battery

cover.

2. Insert two batteries 1.5 V (R-6,

“AA” size). Be sure to match

the battery

±/— terminals

with the

±/— marks inside

the compartment.

3. Replace the battery cover.

COLOUR TELEVISION

OPERATION MANUAL

32JF-77H

PRINTED ON ENVIRONMENTALLY FRIENDLY PAPER

Please read this operation manual carefully

before using the colour television.

Supplied Accessories

Remote Control

TV 1. Stand-by button (TV)

Video 2. Power button (VCR)

TV 3. 0 ~ 9 digit buttons

4. Flash back button

Teletext 5. GREEN button

6. RED button

TV 7. Volume DOWN button

8. MENU button

Teletext 9. REVEAL button

10. LIST button

11. STORE button

12. CANCEL button

13. HALF PAGE button

14. Reset button

TV 14. Subtitle/ Help

Video 15. Rewind/picture search reverse

16. Play button

17. Pause/Still button

18. Stop button

TV 19. TV/VIDEO button

20. Double window button

21. Single/Double entry button

Teletext 22. YELLOW button

23. BLUE button

TV 24. Channel UP button

25. Volume UP button

26. Channel DOWN button

27. Wide Mode Selector

TV /Teletext 28. CLOCK button

TV 29. Sound mode button

Teletext 30. HOLD button

TV 31. Sound Mute button

Teletext 32. TEXT/MIX/PICTURE button

33. INDEX button

Video 34. Channel UP button (VCR)

35. Fast forward/picture search forward

36. Channel DOWN button (VCR)

37. Record button

1. 19.

23.

21.

24.

25.

26.

27.

28.

29.

30.

31.

32.

34.

37.

36.

35.

33.

22.

20.

10.

11.

12.

13.

15.

18.

17.

16.

14.

Controls and Terminals

FRONT TV

1. Main Power On/Off Switch

2. Power Indicator

3. Remote Control Sensor

4. Door

HOW TO OPEN THE DOOR

Lift the projection at the lower right of the door with your

finger in the direction of the arrow.

Behind the door

5. Volume Button (DOWN)

6. Volume Button (UP)

7. Program Selector (NEXT)

8. Program Selector (PREVIOUS)

9. S-Video input terminal

10. Video Input Terminal (PAL/SECAM/NTSC)

11. Audio Input Terminal (left)

12. Audio Input Terminal (right)

13. Headphone Socket (3.5mm Ø, 16~600 ohms)

REAR TV

21-pin In/Out

1. 21-pin Audio/Video (AV-2) With

PAL/SECAM/NTSC Video Input

2. 21-pin Audio/Video (AV-1) With

PAL/SECAM/NTSC/S-Video Input

and AV LINK control signal

3. 21-pin Euro SCART (RGB) With

PAL/SECAM/NTSC Video Input

RF Input

4. Aerial terminal

Digital Audio Input

5. RCA Input Terminal

Use this digital audio input to connect a

set with digital audio output, for example

a DVD, a DAT or a CD.

123 4

5 6 7 8

10 11 12 13

42 3

DIGITAL

AUDIO

INPUT

DIGITAL

AUDIO

INPUT

Note: For further details, please refer to operation manual of your VCR.

DIGITAL

AUDIO

INPUT

DIGITAL

AUDIO

INPUT

Typical Connections

Aerial connection - TV set only -

Aerial Connections - TV and VCR -

BACK OF TV

BACK OF VCR

Aerial

(Not supplied)

Aerial

(Not supplied)

Aerial Lead

(Not supplied)

Aerial Lead

(Not supplied)

Aerial Lead

(Not supplied)

Aerial IN

Audio/Video

Scart Lead

(Not supplied)

RF OUT

AV/TERMINAL

(AV-1)

Aerial IN

DIGITAL

AUDIO

INPUT

DIGITAL

AUDIO

INPUT

Connections - TV, DVD Player, DECODER and VCR (Videorecorder) -

Typical Connections (Continued)

Note: For further details, please refer to operation manuals of your DVD Player, DECODER and VCR.

BACK OF TV

DVD PLAYER

DECODER

BACK OF VCR

Aerial

(Not supplied)

Scart Lead

(Not supplied)

Scart Lead

(Not supplied)

AV/TERMINAL (AV 2)

AV/TERMINAL

(AV 1)

Euro SCART

(RGB)

Aerial IN

RF OUT

Audio/Video

Aerial Lead

(Not supplied)

Aerial Lead

(Not supplied)

Scart Lead

(Not supplied)

DIGITAL

AUDIO IN

Audio lead (Not supplied)

DIGITAL

AUDIO OUT

DIGITAL

AUDIO

INPUT

DIGITAL

AUDIO

INPUT

Connections - TV, DVD Player, and Digital Set Top Box-

Typical Connections (Continued)

BACK OF TV

DVD PLAYER

Scart Lead

(Not supplied)

Scart Lead

(Not supplied)

AV/TERMINAL (AV 2)

Euro SCART

(RGB)

Aerial IN

Aerial Lead

(Not supplied)

Dish Lead

(Not supplied)

DISH IN

AERIAL IN

TV SCART

RF OUT

Satellite dish

(Not supplied)

Aerial

(Not supplied)

Aerial Lead

(Not supplied)

DIGITAL SET

TOP BOX

Note: For further details, please refer to operation manuals of your DVD Player and Digital Set Top Box.

Satellite dish

(Not supplied)

DIGITAL AUDIO IN

Audio lead (Not supplied)

DIGITAL AUDIO OUT

DIGITAL

AUDIO

INPUT

DIGITAL

AUDIO

INPUT

Connections - TV, DVD Player

, VCR and Digital Set Top Box -

Typical Connections (Continued)

BACK OF TV

DVD PLAYER

Scart Lead

(Not supplied)

Scart Lead

(Not supplied)

AV/TERMINAL (AV-2)

AV/TERMINAL

(AV 1)

Euro SCART

(RGB)

Aerial IN

Audio/Video

Aerial Lead

(Not supplied)

Aerial Lead

(Not supplied)

Aerial Lead

(Not supplied)

Dish Lead

(Not supplied)

DISH IN

AERIAL IN

TV SCART

RF OUT

Satellite dish

(Not supplied)

Aerial

(Not supplied)

Scart Lead

(Not supplied)

BACK OF VCR

DIGITAL SET

TOP BOX

RF OUT

Note: For further details, please refer to operation manuals of your DVD Player, VCR and Digital Set Top Box.

DIGITAL AUDIO IN

DIGITAL AUDIO OUT

Audio lead (Not supplied)

DIGITAL

AUDIO

INPUT

Front connections -TV and V

ideo camera-

Connection-TV power cable to a 220 ~ 240 V system -

Typical Connections (Continued)

FRONT TV

(Behind the door)

BACK OF TV

S-Video lead (Hi-8)

(Not supplied)

Audio/Video lead

(Not supplied)

WIEW CAM

Mains Socket Outlet

AC 220~240 V, 50 Hz

S-Video Input Terminal (Hi-8)

Video Input Terminal

Audio Input Terminal (left)

Audio Input Terminal (right)

Note: For further details, please refer to operation manual of your Video Camera.

Auto Installation System

Your television set is provided with an Automatic Installation System, which makes Installation easier.

This new system is activated when you turn on the TV for the first time.

Note: You may not have to follow this procedure if it has already been done for you at the establishment where you

purchased your TV. If this is the case, go on to the section entitled “Switching ON” (page 13).

Procedure:

1. Put batteries into the remote control, as shown on page 3.

2. Connect the aerial jack into the aerial input terminal on the rear side of your TV, as shown on page 6.

3. Connect the TV power cable to a 220 ~ 240 V system, as shown on page 10.

4. Press the main power button (®), on the front of the TV set, to

start the “AUTO INSTALLATION”. The orange power indicator will

light.

5. The “AUTO INSTALLATION” message will appear on your TV

screen followed by a diagram of typical connections.

“AUTO INSTALLATION” message

6. Press the MENU button  on the handset to cancel the AUTO

INSTALLATION or any other button to continue.

To continue

● The TV is ready to preset automatically all local channels for you.

● If the TV is being used with a VCR, turn on the VCR and play back

a pre-recorded tape. The signal from the RF terminal of your VCR

is assigned to a TV channel.

7. Follow the instructions on the screen, to start Auto Channel

Preset.

Auto Channel Preset

The TV will go through the following steps automatically and

sequentially:

Automatic Channel Sorting System (ACSS): The TV set SEARCHES

FOR FREQUENCIES, memorises the channels found, and sorts them

(according to technical criteria) from Pr-01 of the TV, to a maximum of

99 programmes.

Note: This tuning process may take several minutes to perform.

Stored programmes Menu

When the AUTOMATIC SEARCH has been completed, the "STORED

PROGRAMMES" menu will appear on screen and you can change the

order of the channels and change or give the channels a four-letter

name.

If you wish to rename the channels, or change the order, refer to the

chapter -Stored programmes- (page 12).

If you wish to go out of the menu, press the BLUE button .

If you need to repeat the “AUTO INSTALLATION”, read on -TV

Channel Setting- (page 36).

Auto Installation

Power indicator

Main power button

“AUTO INSTALLATION” message

Searching

VCR

Stored programmes Menu

Automatic searching and sorting. Please, wait.

Press the menu button to cancel.

EDIT NAME

SORTING

DELETE

EXIT

Stored programmes: When the TV has finished the automatic search, the «Stored programmes» menu will appear on

screen with a list of the channels, which have been memorised with the available options:

a) Select programme to be edited  E/ F

b) «EDIT NAME»  RED button

c) «SORTING»  GREEN button

d) «DELETE»  YELLOW button

e) Exit  MENU button  or BLUE button .

With these options, you will be able to organise the real channels (CH **)

memorised in the TV programmes (Pr 01 … Pr 99) and put them into your

own preferred order.

a) Select programme to be edited.

Use this option to select a programme

from the list. Each time you

press F or E the memorised channel will be viewed and will

remain selected on the list by means of navy blue background.

b) «EDIT NAME» mode (Change of Name)

Use this option for giving a name

made up of four digits to the

channels or for changing the one, which appears on some

channels, in the following way:

b.1 Select the channel using the Cursor UP/DOWN buttons E/

F (marked with navy blue background).

b.2 Press the RED button to see the «EDIT NAME» mode.

b.3 Press the Cursor UP/DOWN buttons E/ F to change the first

letter. Letters A to Z of the alphabet, a blank space and the

numbers 0 to 9 will appear sequentially. Some of the broadcasting

stations names such as BBC1 or ITV are already incorporated in

the TV and appear among the alphabet to make this task easier.

b.4 Press the

I button for changing the position of the cursor and the

E/ F buttons for changing the letters (repeat this action for

other letters).

b.5 When you have finished the fourth letter, press the

I button to

quit the Change of Name option.

c) «SORTING» mode (sorting channels)

Use this option for sorting the channels

(CH) into the desired

programme (Pr), as follows:

c.1 Select the programme (Pr) you wish to change using Cursor

UP/DOWN buttons E / F (marked with navy blue

background).

c.2 Press the GREEN button to see the «SORTING» mode.

c.3 Press the Cursor UP/DOWN buttons E / F to move the

channel (CH) to the required position (Pr).

c.4 Press the GREEN button to finish.

d) «DELETE» mode (Delete channels)

Use this option for cancelling programmes

, which are badly tuned

or repeated.

d.1 Select the programme (Pr) you wish to delete using Cursor

UP/DOWN buttons E / F (marked with navy blue

background).

d.2 Press the YELLOW button to see the «DELETE» mode.

d.3 Press the YELLOW button again to delete the channel

selected on the list by means of navy blue background []

or press the BLUE button to cancel.

e) Exit

Press the MENU button  or BLUE button to quit the menu.

 DELETE: When you delete a channel, the channels that follow it on the list will automatically rearrange them-

selves by moving up one programme (Pr) place, to restore the space of the cancelled channel (CH).

Stored programmes Menu

STORED PROGRAMMES

EDIT NAME

SORTING

DELETE

«EDIT NAME» mode

STORED PROGRAMMES

«SORTING» mode

STORED PROGRAMMES

MEMORIZE

«DELETE» mode

STORED PROGRAMMES

CONFIRM

CANCEL

EXIT

Switching on

This TV memorizes the Mode last used when it was switched off. When the

main power button (®) is pressed to turn on the set, the power indicator

will light and the set will resume in either the Stand-by mode

or Programme

mode, depending upon its condition when it was switched off.

When the TV is in Stand-by mode

, to turn ON the TV press the Stand-by button (æ TV) on

the remote control, or one of the four buttons on the TV ( ∑ a œ, ∑ CH œ). The TV will

change from Stand-by mode

to Program mode, the sound indicator will light a few moments

and an image will appear on the screen. Press the Stand-by button (æ TV) again and the

TV will return to Stand-by mode

If noise appears in TV or VCR mode, the screen turns blue. The blue back off-timer is then engaged and will

automatically switch the set to Stand-by mode after 15 minutes.

Television broadcasting stations have channel numbers assigned to them (real channel numbers). You can assign your

own channel number to a real channel and store it in the programme channel memory.

Power indicator

Main power button

Power supply on/off button

On-Off/Stand-by button

Blue back off timer

Real Channel Number (terrestrial/cable TV Programmes)

CORRESPONDING REAL CHANNEL

SYSTEM STATION SIGNALS REAL CHANNEL SPECIALLY

NUMBER AVAILABLE

L/L’ F-2 ~ F-4 CH 02 ~ CH 04 In France

F-5 ~ F-10 CH 05 ~ CH 10

E-2 ~ E-4 CH 02 ~ CH 04

V B/G E-5 ~ E-12 CH 05 ~ CH 12

H A ~ H CH 13 ~ CH 20 In Italy

F I IR-1(A) ~ IR-9(J) CH-01 ~ CH-09 In United Kingdom

E-2 ~ E-4 CH 02 ~ CH 04

D/K E-5 ~ E-12 CH 05 ~ CH 12

R-I ~ R-XII CH 71 ~ CH 82

L/L’ F-21 ~ F-69 CH 21 ~ CH 69 In France

UHF B/G E-21 ~ E-69 CH 21 ~ CH 69

I I-21 ~ I-69 CH-21 ~ CH-69 In United Kingdom

D/K E-21 ~ E-69 CH 21 ~ CH 69

B ~ Q CC 01 ~ CC 16

L/L’ 17 ~ 60 CC 17 ~ CC 60 In France

61 ~ 74 CC 61 ~ CC 74

M1/S1 ~ M10/S10 CC 01 ~ CC 10

C U-1/S-11 ~U-10/S-20 CC 11 ~ CC 20

B/G S-21 ~ S-41 CC 21 ~ CC 41

A M1 ~M7 CC 42 ~ CC 48 In Holland

B1 ~B7 CC 49 ~ CC 55

T S’1/S21 ~S’5/S25 CH 75 ~ CH 79 In Switzerland

M1/S1 ~ M10/S10 CC-01 ~ CC-10

V U-1/S-11 ~ U-10/S-20 CC-11 ~ CC-20

I S-21 ~ S-41 CC-21 ~ CC-41 In United Kingdom

CC-42 ~ CC-63

CC-64 ~ CC-68

D/K E-1 ~ E-41 CC 01 ~ CC 41

SOURCE,

TYPE OF

PROTECTION,

START,

END

LOCK ALL

Menu Structures

■ MAIN Menu

By pressing the MENU Button twice

GREEN

YELLOW

BLUE

RED

MAIN Menu

LEVELS: PICTURE MODE: FACTORY / CINEMA / CINEMA PLUS / SOFT / PERSONAL / SPORT /

RICH / FILMS,

CONTRAST, COLOUR, BRIGHTNESS, SHARPNESS

100 HZ: COMB FILTER, NOISE REDUCTION, DIGITAL SCAN, D.GAMMA, SVM, LTI/CTI, BLACK STRETCHER

ADVANCED: OSD CONTRAST, TINT CONTROL, NTSC HUE CONTROL, ROTATION, ECO MODE

EFFECTS: SCAN PROGRAMMES, SCOPE SIGNAL

TIMERS: CURRENT TIME / PROGRAMMED SWITCH ON AT / OFF TIMER STATUS / HELP

EFFECT: AUDIO MODE: BYPASS, DOLBY VIRTUAL, SPATIALIZER MOVIE, SPATIALIZER MUSIC

SPEAKER LEVELS:

VOLUME, BALANCE,

LOUDNESS MODE,

AUTOMATIC VOLUME

CORRECTION,

DYNAMIC BASS.

Normalize audio

levels to default

factory setting

LEVELS

SPEAKERS MATRIX,

HEADPHONES MATRIX, AV

MATRIX, IDENTIFICATION

STEREO

NORMALIZER

ANALOG INPUT,

DIGITAL INPUT,

AUTO DETECTION

NORMAL,

ONLY AUTO

INSTALLATION

STOP, START,

PRESETS,

TIMER

INPUT SELECT

SECURITY

DEMO

POSTCODE,

CHANGE

PASSWORD

To repeat the “AUTO INSTALLATION”

Auto Channel Preset

EDIT NAME (Change of Name)

SORTING (sorting channels)

DELETE (Delete channels)

PROGRAMME: 01-99

CHANNEL TYPE: AERIAL / CABLE

SYSTEM: B/G, D/K, I, L/L’

CHANNEL NUMBER: (REAL CHANNEL)

MODE: TV / VCR / SKIP

SEARCH (frequency tuning)

FINE TUNE

CHILD LOCK

POSTCODE

INSTALLATION

EDIT

PROGRAMME,

TYPE OF

PROTECTION,

START,

END

LOCK

PROGRAMME

Erase all the

adjustments to

the CHILD-

LOCK function.

CLEAR LOCK

AV-LINK

MAIN Menu

PICTURE

ADJUSTMENTS

(RED button) 

Options / Functions

AUDIO

ADJUSTMENTS

(GREEN button)



SET OTHER

FUNCTIONS

(YELLOW

button) 

INSTALL

AND TUNE

(BLUE

button) 

EQUALIZER: CLASSIC, JAZZ, POP, CONCERT, SPORT,

PERSONAL: 100Hz, 330Hz, 1KHz, 3.3KHz, 10KHz

HEADPHONES LEVELS: VOLUME, BALANCE, LOUDNESS MODE, BASS, TREBLE

EXTERNAL LEVELS: SCART VOLUME, AV VOLUME

PASSWORD

+ 35 hidden pages