Schwinn Airdyne AD2, AD2 Owner's Manual

Manual en Español Latino Americano: http://www.schwinnfitness.com

ASSEMBLY MANUAL / OWNER’S MANUAL

Table of Contents

Important Safety Instructions - Assembly	3	Important Safety Instructions - Owner’s	15
Safety Warning Labels / Serial Number	4	Features	16
Specifications	5	Console Features	17
Before Assembly	5	Operations	19
Parts	6	Adjustments	19
Hardware	7	Workout Mode	20
Tools	7	Pausing or Stopping	20
Assembly	8	Service Mode	21
Leveling the Bike	14	Maintenance	22
Moving the Bike	14	Replacing the Batteries	24
		Troubleshooting	25

To validate warranty support, keep the original proof of purchase and record the following information: Serial Number __________________________

Date of Purchase ____________________

To register your product warranty , go to: www.SchwinnFitness.com/register Or call 1 (800) 605–3369.

If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).

Nautilus, Inc., (800) NAUTILUS / [phone], www.NautilusInc.com - Customer Service: North America [phone], [e-mail] | outside U.S. +01-360-859-5180, [e-mail] | Printed in China | © 2011 Nautilus, Inc., All rights reserved. ™ and ® indicate a trademark or registered trademark. Nautilus, Inc. (www.NautilusInc.com) trademarks include NAUTILUS®, BOWFLEX®, SCHWINN®, UNIVERSAL® and AIRDYNE® and respective logos. Other trademarks are the property of their respective owners.

2

Important Safety Instructions

— ASSEMBLY

!This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Obey the following warnings:

!Read and understand all warnings on this machine. Carefully read and understand the Assembly instructions.

•Keep bystanders and children away from the product you are assembling at all times.

•Do not install the batteries into the machine until the time specified in the assembly manual.

•Do not assemble this machine outdoors or in a wet or moist location.

•Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.

•Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

•Set up this machine on a solid, level, horizontal surface.

•Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and will void the warranty.

•If replacement parts are necessary use only genuine replacement parts and hardware supplied by

Nautilus. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.

•Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual.

•Read and understand the complete Manual supplied with this machine before first use. Keep the

Manual for future reference.

•Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.

3

Safety Warning Labels and

Serial Number

•

•

•

•

250lbs. (113kg).

•

•

•

•

•

•

250lbs. (113kg).

•

•

4

Specifications

Maximum User Weight: 250 lbs. (113 kg)

Power Requirements: 2 AA batteries (LR6) - not included

Operational Voltage: 1.0 - 3.3VDC

50” (127 cm)

46” (117 cm)

25” (63.5 cm)

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 82” x 61” (2.1m x 1.5m).

Basic Assembly Tips

Follow these basic points when you assemble your machine:

1.Read and understand the “Important Safety Instructions” before assembly.

2.Collect all the pieces necessary for each assembly step.

3.Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.

4.When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.

5.The assembly requires 2 people.

5

PARTS

1

11	12

2

10

3

9

			5
	8	7
		6	4

Item	Qty	Description	Item	Qty	Description
1	1	Main Frame	7	1	Foot Peg, Left
2	1	Front Stabilizer	8	1	Handlebar, Right
3	1	Rear Stabilizer	9	1	Handlebar, Left
4	1	Pedal, Right	10	1	Console
5	1	Pedal, Left	11	1	Seat
6	1	Foot Peg, Right	12	1	Seat Post

6

HARDWARE / TOOLs

Item	Qty	Description
A	8	Button Head Hex Screw M8 x 20
B	8	Curved Washer M8
C	8	Lock Washer M8

Tools

Included	Not Included
6 mm	(recommended)

7

ASSEMBLY

1. Attach Stabilizers to Frame Assembly

1

X4	6 mm

A

2

C

B

3

8

2. Attach Pedals

Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a seated position on the bike. The Left Pedal has an “L”, the Right Pedal an “R”.

5

4

9